FSA2267AL10X

FSA2267_0703 FAIRCHILD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Features

■ Typical 0.35Ω On Resistance (RON) for +2.7V supply ■ FSA2267A features less than 10µA ICCT current when S Input is lower than VCC ■ 0.25Ω maximum RON flatness for +2.7V supply ■ 1.6mm x 2.1mm 10-Lead MicroPak™ package ■ Broad VCC operating range ■ Low THD (0.02% typical for 32Ω load) ■ High current handling capability (350mA continuous current under 3.3V supply)

Applications

■ Cell phone ■ PDA ■ Portable media player

Description

The FSA2267 and FSA2267A are Dual Single Pole Dou- ble Throw (SPDT) analog switches. The FSA2267 oper- ates from a single 1.65V to 3.6V supply, while the FSA2267A operates from a single 2.3V to 4.3V supply. Each features an ultra-low On Resistance of 0.35 Ω at a +2.7V supply and 25°C. Both devices are fabricated with sub-micron CMOS technology to achieve fast switching speeds and designed for break-before-make operation. FSA2267A features very lo w quiescent current, even when the control voltage is lower than the V CC supply. This feature services the mobile handset applications very well, allowing for the direct interface with baseband processor general-purpose I/Os.

Ordering Information

Lead-Free package per JEDEC J-STD-020B. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. Figure 1. Application Diagram

2267 Yes 10-Lead Molded Small Outline Package (MSOP),

3000 Units on

4000 Units on

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.3 3 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera- ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi- tion, extended exposure to stresses above the recommended op erating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.. Notes: 1. The input and output negative voltage ratings may be e xceeded if the input and output diode current ratings are observed. 2. Minimums define the acceptable range of current. Negat ive current should not exceed minimun negative values. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Note: 3. Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 +5.5 V VS Switch Voltage(1) -0.5 V CC + 0.5 V VIN Input Voltage(1) -0.5 V CC V IIK Input Diode Current(2) -50 mA ISW Switch Current 350 mA ISWPEAK Peak Switch Current (Pulsed at 1ms duration, <10% Duty Cycle) 500 mA TSTG Storage Temperature Range -65 +150 °C TJ Maximum Junction Temperature +150 °C TL Lead Temperature (Soldering, 10 seconds) +260 °C ESD Human Body Model: FSA2267 7500 V Human Body Model: FSA2267A 7000 V Charged Device Model: FSA2267/FSA2267A 1000 V Symbol Parameter Min. Max. Unit V CC Supply Voltage V FSA2267 1.65 3.6 V FSA2267A 2.3 4.3 V IN Control Input Voltage(3) 0V CC V VSW Switch Input Voltage 0 V CC V TA Operating Temperature -40 +85 °C

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.3 5 All typical values are at 25°C unless otherwise specified. Notes: 4. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 5. ΔRON = RONmax - RONmin measured at identical VCC, temperature, and voltage. 6. Flatness is defined as the difference between the maximum and minimum value of RON over the specified range of conditions. Symbol Parameter Conditions VCC TA = +25°C TA= −40 to +85°C Units VIH Input Voltage High 2.7 to 3.6 2.0 V2.3 to 2.7 1.7 1.65 to 1.95 0.65 VCC VIL Input Voltage Low 2.7 to 3.6 0.8 V2.3 to 2.7 0.7 1.65 to 1.95 0.35 VCC IIN Control Input Leakage V IN = 0V to VCC 1.65 to 3.6 -0.5 0.5 μA INO(OFF), INC(OFF) Off-Leakage Current of Port nB0 and nB1 nA = 0.3V, 3.3V, nB0 or nB1 nAnA = 0.3V, 2.4V, nB0 or nB1 nA = 0.3V, 1.65V, nB0 or nB1 IA(ON) On Leakage Current of Port 1A and 2A nA = 0.3V, 3.3V, nB0 or nB1 nAnA = 0.3V, 2.4V, nB0 or nB1 nA = 0.3V, 1.65V, nB0 or nB1 RON Switch On Resistance(4) See Figure 9 IOUT = 100mA, nB0 or nB1 ΩIOUT = 100mA, nB0 or nB1 IOUT = 100mA, nB0 or nB1 ΔRON On Resistance Matching Between Channels(5) IOUT = 100mA, nB0 or nB1 = 0.7V 2.7 0.040 0.075 Ω2.3 0.040 0.080 1.65 0.1 RFLAT(ON) On Resistance Flatness(6) IOUT = 100mA, nB0 or nB1 = 0V to VCC 2.7 0.25 Ω2.3 0.3 1.65 0.3 ICC Quiescent Supply Current V IN = 0V or VCC, IOUT = 0A 3.6 -100 100 -500 500 nA

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.3 6 All typical values are at 25°C unless otherwise specified. Notes: 7. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 8. ΔRON = RONmax - RONmin measured at identical VCC, temperature, and voltage. 9. Flatness is defined as the difference between the maximum and minimum value of RON over the specified range of conditions. Symbol Parameter Conditions VCC TA = +25°C TA= −40 to +85°C Units VIH Input Voltage High 3.6 to 4.3 1.7 V2.7 to 3.6 1.5 2.3 to 2.7 1.4 VIL Input Voltage Low 3.6 to 4.3 0.7 V2.7 to 3.6 0.5 2.3 to 2.7 0.4 IIN Control Input Leakage V IN = 0V to VCC 2.3 to 4.3 -0.5 0.5 µA INO(OFF), INC(OFF) Off-Leakage Current of Port nB0 and nB1 nA = 0.3V, 4.0V, nB0 or nB1 nAnA = 0.3V, 3.3V, nB0 or nB1 nA = 0.3V, 2.4V, nB0 or nB1 = IA(ON) On Leakage Current of Port 1A and 2A nA = 0.3V, 4.0V, nB0 or nB1 = nAnA = 0.3V, 3.3V, nB0 or nB1 = nA = 0.3V, 3.3V, nB0 or nB1 RON Switch On Resistance(7) IOUT = 100mA, nB0 or nB1 Ω IOUT = 100mA, nB0 or nB1 IOUT = 100mA, nB0 or nB1 IOUT = 100mA, nB0 or nB1 = 0.8V 1.65 1.0 ΔRON On Resistance Matching Between Channels(8) See Figure 10 IOUT = 100mA, nB0 or nB1 = 0.7V 4.3 0.04 0.075 Ω 3.0 0.04 0.075 2.7 0.04 0.075 1.65 0.1 RFLAT(ON) On Resistance Flatness(9) IOUT = 100mA, nB0 or nB1 = 0V to VCC 4.3 0.15 0.25 Ω 3.0 0.15 0.25 2.7 0.15 0.25 1.65 0.3 ICC Quiescent Supply Current V IN = 0V or VCC, IOUT = 0A 4.3 -100 80 100 -500 500 nA ICCT Increase in ICC per Input VIN = 1.8V 4.3 7.0 10.0 15.0 µA VIN = 2.6V 0.5 2.0 7.0

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.3 7 All typical values are at 25°C unless otherwise specified. Symbol Parameter Conditions VCC (V) TA = +25°C TA= -40 to +85°C Units Figure Number tON Turn-On Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35 pF tOFF Turn-Off Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35 pF tBBM Break-Before- Make Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35 pF 2.7 to 3.6 17.0 2.0 ns Figure 122.3 to 2.7 15.0 2.0 1.65 to 1.95 12.0 2.0 Q Charge Injection CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.7 to 3.6 9.0 pC Figure 14CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.3 to 2.7 9.0 CL = 100 pF, VGEN = 0V, RGEN = 0Ω 1.65 to 1.95 9.0 OIRR Off Isolation f = 100kHz, RL = 50Ω, CL = 5pF (Stray) 2.7 to 3.6 -80.0 dB Figure 132.3 to 2.7 -80.0 1.65 to 1.95 -80.0 Xtalk Crosstalk f = 100kHz, RL = 50Ω, CL = 5pF (Stray) 2.7 to 3.6 -80.0 dB Figure 132.3 to 2.7 -80.0 1.65 to 1.95 -80.0 BW -3db Bandwidth R L = 50Ω 1.65 to 3.6 45.0 MHz Figure 16 THD Total Harmonic Distortion RL = 32Ω, VIN = 2Vpk-pk, f = 20Hz to 20kHz 2.7 to 3.6 0.024 % Figure 17RL = 32Ω, VIN = 1.5Vpk-pk, f = 20Hz to 20kHz 2.3 to 2.7 0.015 RL = 32Ω, VIN = 1.2Vpk-pk, f = 20Hz to 20kHz 1.65 to 1.95 0.35

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.3 8 All typical value are at 25°C unless otherwise specified. Capacitance Symbol Parameter Conditions VCC (V) TA = +25°C TA= -40 to +85°C Units Figure Number tON Turn-On Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35pF ns Figure 11 2.3 to 2.7 60 1.65 570 tOFF Turn-Off Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35pF ns Figure 11 2.3 to 2.7 50.0 1.65 500 tBBM Break-Before- Make Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35pF 3.6 to 4.3 8.0 2.0 ns Figure 122.7 to 3.6 8.0 2.0 2.3 to 2.7 8.0 2.0 Q Charge Injection CL = 100 pF, VGEN = 0V, RGEN = 0Ω 3.6 to 4.3 24.0 pC Figure 14CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.7 to 3.6 24.0 CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.3 to 2.7 24.0 OIRR Off Isolation f = 100kHz, RL = 50Ω, CL = 5pF (Stray) 3.6 to 4.3 -75.0 dB Figure 132.7 to 3.6 -75.0 2.3 to 2.7 -75.0 Xtalk Crosstalk f = 100kHz, RL = 50Ω, CL = 5pF (Stray) 3.6 to 4.3 -70.0 dB Figure 132.7 to 3.6 -70.0 2.3 to 2.7 -70.0 BW -3db Bandwidth R L = 50Ω 2.3 to 4.3 45.0 MHz Figure 16 THD Total Harmonic Distortion RL = 32Ω, VIN = 2Vpk-pk, f = 20Hz to 20kHz 3.6 to 4.3 0.02 % Figure 17RL = 32Ω, VIN = 1.5Vpk-pk, f = 20Hz to 20kHz 2.7 to 3.6 0.02 RL = 32Ω, VIN = 1.2Vpk-pk, f = 20Hz to 20kHz 2.3 to 2.7 0.02 Symbol Parameter Conditions VCC (V) TA = +25°C TA= -40 to +85°C Units Figure Number CIN Control Pin Input Capacitance f = 1Mhz 0.0 1.5 pF Figure 15 COFF B Port Off Capacitance f = 1Mhz 3.3 30.0 pF Figure 15 CON A Port On Capacitance f = 1Mhz 3.3 126 pF Figure 15

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.3 12 Tape and Reel Specification Tape Format for MicroPak™ 10 Dimensions are in millimeters (inches) unless otherwise noted. Reel Dimensions Package Designator Tape Section Cavity Number Cavity Status Cover Tape Status Leader (Start End) 125 (typical) Empty Sealed L10X Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typical) Empty Sealed T a p e S i z e ABCDN W 1 W 2 W 3

Dimensions are in millimeters unless otherwise noted. Figure 18. Pb-Free, 10-Lead, MicroPak™, 1.6 x 2.1mm

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.3 14 Tape and Reel Specification Tape Dimensions for MSOP 10 Dimensions are in millimeters unless otherwise specified. Reel Dimensions for MSOP Dimensions are in inches (millimeters) unless otherwise specified. T a p e S i z e ABCDN W 1 W 2 W 3

Dimensions are in millimeters unless otherwise noted. Figure 19. Pb-Free, 10-Lead, Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.3 16