FSA2267

FSA2267 FAIRCHILD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Features

■ Typical 0.35Ω On Resistance (RON) for +2.7V supply ■ FSA2267A features less than 10µA ICCT current when S Input is lower than VCC ■ 0.25Ω maximum RON flatness for +2.7V supply ■ 1.6mm x 2.1mm 10-Lead MicroPak™ package ■ Broad VCC operating range ■ Low THD (0.02% typical for 32Ω load) ■ High current handling capability (350mA continuous current under 3.3V supply)

Applications

■ Cell phone ■ PDA ■ Portable media player

Description

The FSA2267 and FSA2267A are Dual Single Pole Dou- ble Throw (SPDT) analog switches. The FSA2267 oper- ates from a single 1.65V to 3.6V supply, while the FSA2267A operates from a single 2.3V to 4.3V supply. Each features an ultra-low On Resistance of 0.35 Ω at a +2.7V supply and 25°C. Both devices are fabricated with sub-micron CMOS technology to achieve fast switching speeds and designed for break-before-make operation. FSA2267A features very lo w quiescent current, even when the control voltage is lower than the V CC supply. This feature services the mobile handset applications very well allowing for the direct interface with baseband processor general purpose I/Os.

Ordering Information

Pb-Free package per JEDEC J-STD-020B. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. Application Diagram Order Number Package Number Product Code Top Mark Lead- Free Package Description Packing Method FSA2267L10X MAC010A FC Yes 10-Lead MicroPak, 1.6 x 2.1mm, JEDEC MO-255 5K Units on Tape and Reel FSA2267MUX (Preliminary) MUA10A FSA 2267 Yes 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide 3K Units on Tape and Reel FSA2267AL10X MAC010A FD Yes 10-L ead MicroPak, 1.6 x 2.1mm JEDEC MO-255 5K Units on Tape and Reel FSA2267AMUX (Preliminary) MUA10A FSA 2267A Yes 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide 3K Units on Tape and Reel

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.2 2 Analog Symbols Connections Diagram 10-Lead MSOP 10-Lead Micropak Truth Table Pin Descriptions Control Input(s) Function LOW Logic Level B 0 Connected to A HIGH Logic Level B 1 Connected to A Pin Names Function 1A, 2A, 1B0, 1B1, 2B0, 2B1 Data Ports 1S, 2S Control Input 1B0 1B1 2B0 2B1 1B0 1B1 2B0 2B1 GND Vcc 1B0 1B1 2B0 2B1 A V cc GND

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.2 3 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera- ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi- tion, extended exposure to stresses above the recommended op erating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.. Notes: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. 2. Minimums define the acceptable range of current. Nega tive current should not exceed minimun negative values. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Notes: 3. Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 +5.5 V VS Switch Voltage(1) -0.5 V CC + 0.5 V VIN Input Voltage(1) -0.5 V CC V Input Diode Current(2) -50 mA Switch Current 350 mA Peak Switch Current (Pulsed at 1ms duration, <10% Duty Cycle) 500 mA T STG Storage Temperature Range -65 +150 °C TJ Maximum Junction Temperature +150 °C TL Lead Temperature (Soldering, 10 seconds) +260 °C ESD Human Body Model: FSA2267 7500 V Human Body Model: FSA2267A 7000 V Charge Device Model: FSA2267/FSA2267A 1000 V Symbol Parameter Min. Max. Unit V CC Supply Voltage V FSA2267 1.65 3.6 V FSA2267A 2.3 4.3 V IN Control Input Voltage(3) 0V CC V VSW Switch Input Voltage 0 V CC V TA Operating Temperature -40 +85 °C

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.2 5 All typical values are at 25°C unless otherwise specified. 4. On Resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 5. ΔRON = RONmax - RONmin measured at identical VCC, temperature, and voltage. 6. Flatness is defined as the difference between the maximum and minimum value of RON over the specified range of conditions. Symbol Parameter Conditions VCC TA = +25°C TA= −40 to +85°C VIH Input Voltage High 2.7 to 3.6 2.0 V 2.3 to 2.7 1.7 1.65 to 1.95 0.65 VCC VIL Input Voltage Low 2.7 to 3.6 0.8 V 2.3 to 2.7 0.7 1.65 to 1.95 0.35 VCC IIN Control Input Leakage V IN = 0V to VCC 1.65 to 3.6 -0.5 0.5 μA INO(OFF), INC(OFF) OFF-Leakage Current of Port nB 0 and nB1 nA = 0.3V, 3.3V, nB0 or nB1 = 0.3V, 3.3V or floating 3.6 -5.0 5.0 -50 50 nA nA = 0.3V, 2.4V, nB0 or nB1 = 0.3V, 2.4V or floating nA = 0.3V, 1.65V, nB0 or nB1 = 0.3V, 1.65V or floating 1.95 -5.0 5.0 -50 50 IA(ON) ON Leakage Current of Port 1A and 2A nA = 0.3V, 3.3V, nB0 or nB1 = 0.3V, 3.3V or floating 3.6 -5.0 5.0 -50 50 nA nA = 0.3V, 2.4V, nB0 or nB1 = 0.3V, 2.4V or floating nA = 0.3V, 1.65V, nB0 or nB1 = 0.3V, 1.65V or floating 1.95 -5.0 5.0 -50 50 RON Switch On Resistance(4) See Figure 5 IOUT = 100mA, nB0 or nB1 2.7 0.35 0.60 Ω IOUT = 100mA, nB0 or nB1 2.3 0.45 0.75 IOUT = 100mA, nB0 or nB1 = 0.8V 1.65 1.0 3.9 ΔRON On Resistance Matching Between Channels(5) IOUT = 100mA, nB0 or nB1 = 0.7V 2.7 0.040 0.075 Ω 2.3 0.040 0.080 1.65 0.1 RFLAT(ON) On Resistance Flatness(6) IOUT = 100mA, nB0 or nB1 = 0V to VCC 2.7 0.25 Ω 2.3 0.3 1.65 0.3 ICC Quiescent Supply Current V IN = 0V or VCC, IOUT = 0A 3.6 -100 100 -500 500 nA

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.2 6 All typical values are at 25°C unless otherwise specified. 7. On Resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 8. ΔRON = RONmax - RONmin measured at identical VCC, temperature, and voltage. 9. Flatness is defined as the difference between the maximum and minimum value of RON over the specified range of conditions. Symbol Parameter Conditions VCC TA = +25°C TA= −40 to +85°C VIH Input Voltage High 3.6 to 4.3 1.7 V 2.7 to 3.6 1.5 2.3 to 2.7 1.4 VIL Input Voltage Low 3.6 to 4.3 0.7 V 2.7 to 3.6 0.5 2.3 to 2.7 0.4 IIN Control Input Leakage V IN = 0V to VCC 2.3 to 4.3 -0.5 0.5 µA INO(OFF), INC(OFF) OFF-Leakage Current of Port nB 0 and nB1 nA = 0.3V, 4.0V, nB0 or nB1 = 4.0V, 0.3V or floating 4.3 -10.0 10.0 -100 100 nA nA = 0.3V, 3.3V, nB0 or nB1 = 0.3V, 3.3V or floating nA = 0.3V, 2.4V, nB0 or nB1 = 0.3V, 2.4V or floating IA(ON) ON Leakage Current of Port 1A and 2A nA = 0.3V, 4.0V, nB0 or nB1 = 0.3V, 4.0V or floating 4.3 -20.0 20.0 -200 200 nA nA = 0.3V, 3.3V, nB0 or nB1 = 0.3V, 3.3V or floating nA = 0.3V, 3.3V, nB0 or nB1 = 0.3V, 3.3V or floating RON Switch On Resistance(7) IOUT = 100mA, nB0 or nB1 4.3 0.35 0.6 Ω IOUT = 100mA, nB0 or nB1 3.0 0.35 0.6 IOUT = 100mA, nB0 or nB1 2.7 0.35 0.6 IOUT = 100mA, nB0 or nB1 = 0.8V 1.65 1.0 ΔRON On Resistance Matching Between Channels(8) See Figure 6 IOUT = 100mA, nB0 or nB1 = 0.7V 4.3 0.04 0.075 Ω 3.0 0.04 0.075 2.7 0.04 0.075 1.65 0.1 RFLAT(ON) On Resistance Flatness(9) IOUT = 100mA, nB0 or nB1 = 0V to VCC 4.3 0.15 0.25 Ω 3.0 0.15 0.25 2.7 0.15 0.25 1.65 0.3 I CC Quiescent Supply Current V IN = 0V or VCC, IOUT = 0A 4.3 -100 80 100 -500 500 nA VIN = 2.6V 0.5 2.0 7.0

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.2 7 All typical values are at 25°C unless otherwise specified. Symbol Parameter Conditions VCC (V) TA = +25°C TA= -40 to +85°C Units Figure Number tON Turn ON Time nB 0 or nB1 = 1.5V, RL = 50Ω, CL = 35 pF tOFF Turn OFF Time nB 0 or nB1 = 1.5V, RL = 50Ω, CL = 35 pF tB-M Break-Before- Make Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35 pF 2.7 to 3.6 17.0 2.0 ns Figure 82.3 to 2.7 15.0 2.0 1.65 to 1.95 12.0 2.0 Q Charge Injection C L = 100 pF, VGEN = 0V, RGEN = 0Ω 2.7 to 3.6 9.0 pC Figure 10CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.3 to 2.7 9.0 CL = 100 pF, VGEN = 0V, RGEN = 0Ω 1.65 to 1.95 9.0 OIRR OFF-Isolation f = 100kHz, RL = 50Ω, CL = 5 pF (Stray) 2.7 to 3.6 -80.0 dB Figure 92.3 to 2.7 -80.0 1.65 to 1.95 -80.0 Xtalk Crosstalk f = 100kHz, R L = 50Ω, CL = 5 pF (Stray) 2.7 to 3.6 -80.0 dB Figure 92.3 to 2.7 -80.0 1.65 to 1.95 -80.0 BW -3db Bandwidth R L = 50Ω 1.65 to 3.6 45.0 MHz Figure 12 THD Total Harmonic Distortion RL = 32Ω, VIN = 2Vpk-pk, f= 20Hz to 20kHz 2.7 to 3.6 0.024 % Figure 13RL = 32Ω, VIN = 1.5Vpk-pk, f= 20Hz to 20kHz 2.3 to 2.7 0.015 RL = 32Ω, VIN = 1.2Vpk-pk, f= 20Hz to 20kHz 1.65 to 1.95 0.35

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267ARev. 1.0.2 8 All typical value are at 25°C unless otherwise specified. Capacitance Symbol Parameter Conditions VCC (V) TA = +25°C TA= -40 to +85°C Units Figure Number tON Turn ON Time nB 0 or nB1 = 1.5V, RL = 50Ω, CL = 35pF ns Figure 7 2.3 to 2.7 60 1.65 570 tOFF Turn OFF Time nB 0 or nB1 = 1.5V, RL = 50Ω, CL = 35pF ns Figure 7 2.3 to 2.7 50.0 1.65 500 tB-M Break-Before- Make Time nB0 or nB1 = 1.5V, RL = 50Ω, CL = 35pF 3.6 to 4.3 8.0 2.0 ns Figure 82.7 to 3.6 8.0 2.0 2.3 to 2.7 8.0 2.0 Q Charge Injection C L = 100 pF, VGEN = 0V, RGEN = 0Ω 3.6 to 4.3 24.0 pC Figure 10CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.7 to 3.6 24.0 CL = 100 pF, VGEN = 0V, RGEN = 0Ω 2.3 to 2.7 24.0 OIRR OFF-Isolation f = 100kHz, R L = 50Ω, CL = 5pF (Stray) 3.6 to 4.3 -75.0 dB Figure 92.7 to 3.6 -75.0 2.3 to 2.7 -75.0 Xtalk Crosstalk f = 100kHz, R L = 50Ω, CL = 5pF (Stray) 3.6 to 4.3 -70.0 dB Figure 92.7 to 3.6 -70.0 2.3 to 2.7 -70.0 BW -3db Bandwidth R L = 50Ω 2.3 to 4.3 45.0 MHz Figure 12 THD Total Harmonic Distortion RL = 32Ω, VIN = 2Vpk-pk, f= 20Hz to 20kHz 3.6 to 4.3 0.02 % Figure 13RL = 32Ω, VIN = 1.5Vpk-pk, f= 20Hz to 20kHz 2.7 to 3.6 0.02 RL = 32Ω, VIN = 1.2Vpk-pk, f= 20Hz to 20kHz 2.3 to 2.7 0.02 Symbol Parameter Conditions VCC (V) TA = +25°C TA= -40 to +85°C Units Figure Number CIN Control Pin Input Capacitance f=1Mhz 0.0 1.5 pF Figure 11 COFF B Port OFF Capacitance f=1Mhz 3.3 30.0 pF Figure 11 CON A Port ON Capacitance f=1Mhz 3.3 126 pF Figure 11

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.2 12 Tape and Reel Specification Tape Format For MicroPak 10 Dimensions are in millimeters (inches) unless otherwise noted. Reel Dimensions Package Designator Tape Section Cavity Number Cavity Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed L10X Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed T a p e S i z e ABCDN W 1 W 2 W 3

Dimensions are in millimeters unless otherwise noted. Figure 14. Pb-Free 10-Lead MicroPak, 1.6 x 2.1mm

Dimensions are in millimeters unless otherwise noted. Figure 15. Pb-Free 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm wide

FSA2267/FSA2267A 0.35Ω Low-Voltage Dual-SPDT Analog Switch © 2005 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA2267 / FSA2267A Rev. 1.0.2 15