FSA1153 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • DP3T USB Type C Audio and UART Analog Switch
  • VDD: 2.7 V to 5.5 V
  • ICC: 35 /C0109A Typical
  • USB Switch ♦ −3 dB Bandwidth (Sdd21): 850 MHz
  • Audio Switch: ♦ Negative Rail Capability: −3 V to +3 V ♦ Audio Path RON = 1 /C0087 (Typ.) at 3.3 V ♦ THD + N = −110 dB; 1 VRMS, 32 /C0087 Load; f = 20 Hz ~ 20 kHz with A−Weighted Filter
  • UART Switch: ♦ RON: 5 /C0087 (Typ.) at 3.3 V ♦ Signal Range: 0 − 4.4 V
  • High Power Supply Ripple Rejection
  • 20.5 V Overvoltage Protection on DN_L/DP_R
  • 20.5 V Surge Protection on DN_L/DP_R

Applications

  • Mobile Phones
  • Tablets
  • Notebook PC
  • Media Player WLCSP12 CASE 567WM www.onsemi.com See detailed ordering and shipping information on page 3 of this data sheet.

ORDERING INFORMATION

6G = Device Number KK = Assembly Lot X = Year Y = Work Week Z = Assembly Location MARKING DIAGRAM 6GKK XYZ

www.onsemi.com Table 1. CONTROL LOGIC STATUS Temperature Range Package Top Mark FSA1153UCX −40 to +85°C 12−Ball WLCSP, Non−JEDEC 1.45 mm x 1.615 mm, 0.4 mm Pitch †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. ABSOLUTE MAXIMUM RATINGS Symbol Parameter Min. Max. Unit VDD Supply Voltage from VDD −0.5 6.5 V VSW_C VDP_R to GND, VDN_L to GND (Note 1) −3.6 20.5 V VSW_USB VDP to GND, VDN to GND (Note 1) −0.5 6.5 V VSW_Audio VL to GND, VR to GND (Note 1) −3.6 6.5 V VSW_UART VTXD to GND, VRXD to GND (Note 1) −0.5 6.5 V VSW Control Input Voltage: S1, S0 (Note 2) −0.5 6.5 V ISW_Audio Switch I/O Current, Audio path: R, L, DP_R, DN_L −250 250 mA ISW_USB Switch I/O Current, USB path; DP to DP_R, DN to DN_L − 100 mA ISW_UART Switch I/O Current, UART path; TXD to DP_R, RXD to DN_L − 50 mA IIK DC Input Diode Current −50 − mA ESD Human Body Model, ANSI / ESDA / JEDEC JS−001−2012 Connector side and power pins: VDD, DP_R, DN_L 4 − kV Host side pins: The rest pins 2 − Charged Device Model, JEDEC: JESD22−C101 1 − Surge IEC 61000−4−5 System Connector side pins: DP_R, DN_L −20.5 +20.5 V TSTG Storage Temperature −65 +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. 2. V SW refers to analog data switch paths.

www.onsemi.com RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit POWER VDD Supply Voltage 2.7 − 5.5 V USB SWITCH VSW_USB VDP to GND, VDN to GND, VDP_R to GND, VDN_L to GND 0 − 4.5 V AUDIO SWITCH VSW_Audio VDP_R to GND, VDN_L to GND, VL to GND, VR to GND, −3.0 − +3.0 V UART SWITCH VSW_UART VTXD to GND, VRXD to GND 0 − 4.4 V OPERATING TEMPERATURE TA Ambient Operating Temperature −40 25 +85 °C CONTROL VOLTAGE (S1, S0) VIH Input Voltage High 1.3 − VCC V VIL Input Voltage Low 0 − 0.5 V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability.

www.onsemi.com DC AND TRANSIENT CHARACTERISTICS Symbol Parameter Condition Power TA = −40/C0053C to 85/C0053C UnitMin Typ Max GENERAL DEVICE PINS ICC Supply current For all switches VDD: 2.7 to 5.5 − − 35 /C0109A ICCZ Quiescent current S0, 1 = 1 − − 3 ICCT Vin = 1.5 V − 10 − /C0109A COMMON PINS: DP_R, DN_L IOFF Power−Off leakage current of Port DP_R and DN_L DP_R, DN_L = 0 V to 4.0 V Power off −3.0 0.1 3.0 /C0109A AUDIO SWITCH ION On leakage current of Audio switch DN_L, DP_R = −3 V to 3.0 V, R, L = Float IOZ Off leakage current of L / R = −3 V to 3.0 V VDD: 2.7 to 5.5 −1 0.1 1 /C0109A IOFF Input Leakage Current , Power off L, R = 0 to 3 V, DP_R, DP_L = Float, (ISW = 0 mA) Power off −1.0 0.1 1.0 /C0109A RON Switch On Resistance ISW = 100 mA, VSW = −3 V to 3 V VDD: 2.7 to 5.5 − 1 2 /C0087 /C0068RON On Resistance Matching, Channel to Channel ISW = 100 mA, VSW = −3 V to 3 V VDD: 2.7 to 5.5 − 0.1 0.2 /C0087 RFLAT On Resistance Flatness ISW = 100 mA, VSW = −3 V to 3 V VDD: 2.7 to 5.5 − 10 − m/C0087 USB SWITCH ION On leakage current of USB switch DN_L, DP_ R = 0 V to 3.6 V, DP = DN = Float VDD: 2.7 to 5.5 −3.0 0.1 5 /C0109A DN_L, DP_R = 3.6 V to 4.5 V, DP = DN = Float −5 − 15 /C0109A IOFF Power−Off leakage current of Port DP and DN DN, DP = 0 V to 4.5 V Power off −3.0 0.1 3.0 /C0109A RON_USB Switch On Resistance VSW = 0.4 V, ION= −8 mA VDD: 2.7 to 5.5 − 3 5 /C0087 Vsw = 4.0 V, ION = −8 mA − 3 5 UART SWITCH ION On leakage current of UART switch DN_L, DP_ R = 0 V to 4.4 V, UART = Float VDD: 2.7 to 5.5 −3.0 0.1 15 /C0109A IOFF Power−Off leakage current of Port TXD/RXD TXD/RXD = 0 V to 4.4 V, Power off −3.0 0.1 3.0 /C0109A RON_UART UART Switch On Resistance VSW = 0 to 4.4 V, ION= −8 mA VDD: 2.7 to 5.5 − 5 7 /C0087 S1, S0 VIH Input Voltage High VDD: 2.7 to 5.5 1.3 − VDD V VIL Input Voltage Low VDD: 2.7 to 5.5 − − 0.5 V RPD Internal Pull down resistor on S1,S0 S1, S0 = VDD VDD: 2.7 to 5.5 − 3 − M/C0087

www.onsemi.com AC CHARACTERISTICS Symbol Parameter Condition Power TA = −40/C0053C to 85/C0053C Unit Min Typ Max Unit AUDIO PATH SWITCH tON Turn On Time (Note 3) DP/R = DN/L = 0 V → to 1 V, L, R = 32 /C0087 to GND − 80 − /C0109s tOFF Turn OFF Time (Note 3) DP/R = DN/L = 1 V fall to GND, L, R = 32 /C0087 to GND − 0.4 − /C0109s tBBM Break Before Make (Note 3) USB → Audio, DP/R = DN/L = 0 V → 1 V, L, R = 32 /C0087 to GND, DP, DN = 50 /C0087 to GND UART → Audio, UART = 50 /C0087 − 80 − /C0109s TEN Enable Time (Note 3) DP/R = DN/L = 1 V, L, R = 32 /C0087 to GND, S[1, 0] from 11 to 01 − 230 − /C0109s TDis Disable Time (Note 3) DP/R = DN/L = 1 V, L, R = 32 /C0087 to GND, S[1, 0] from 01 to 11 − 0.3 − /C0109s tOVP Response Time RLOAD = 32 /C0087, Vsw = 3 V to 6 V (slew rate >10 V/1 /C0109s), measure OV threshold to 90% OVP trigger level of output falling − 0.2 1 /C0109s OIRR Off Isolation (Note 3) f = 1 kHz, RL = 50 /C0087, CL = 0 pF, VSW = 1 VRMS − −100 − dB f = 1 MHz, RL = 50 /C0087, CL = 0 pF, VSW = 1 VRMS −65 XTALK Cross Talk (Adjacent) (Note 3) f = 1 kHz, RL = 50 /C0087, VSW = 1 VRMS − −120 − dB Cross Talk (USB−Audio) (Note 3) f = 1 kHz or 20 kHz, RL = 50 /C0087, VSW = 1 VRMS on DP or DN − −108 − BW −3 dB Bandwidth (Note 3) RL = 50 /C0087 − 500 − MHz PSRR Power Supply Rejection Ratio (Note 3) VPSRR = VDD + 100 mVRMS RL = 20 k/C0087 or 32 /C0087 (at DP / R,DN / L), f = 1 kHz RL = 32 /C0087 − −119 − dB RL = 20 k/C0087 − −105 − THD+N Total Harmonic Distortion + Noise (Note 3) RL = 16 /C0087, f = 20Hz ∼ 20 kHz, VSW = 0.5 VRMS With A−weighted − −108 − dB Non A−weighted − −105 RL= 32 /C0087, f = 20Hz ∼ 20 kHz, VSW = 1 VRMS With A−weighted − −110 dB Non A−weighted − −105 RL = 20 k/C0087, f = 20 Hz ∼ 20 kHz, VSW = 0.3 VRMS With A−weighted − −110 dB Non A−weighted − −105 USB SWITCH tON Turn−on time (Note 3) DP/R = DN/L = 1.0 V, DP, DN = 50 /C0087 to GND − 40 − /C0109s tOFF Turn−off time (Note 3) DP/R = DN/L = 1.0 V, DP, DN = 50 /C0087 to GND − 0.35 − /C0109s TBBM Break−Before−Make (Note 3) Audio → USB; DP/R = DN/L = 1.5 V, L, R = 50 /C0087 to GND, DP, DN = 50 /C0087 to GND UART → USB: UART = 50 /C0087 − 40 − /C0109s TEN Enable Time (Note 3) DP/R = DN/L = 1 V, DP/DN = 50 /C0087 to GND, S[1, 0] from 11 to 00 − 200 − /C0109s TDis Disable Time (Note 3) DP / R = DN / L = 1 V, DP / DN = 50 /C0087 to GND, S[1, 0] from 00 to 11 − 0.25 − /C0109s BW −3dB Bandwidth (Note 3) RL = 50 /C0087, Switch ON − 0.85 − GHz XTALK Cross Talk (Adjacent) (Note 3) RL = 50 /C0087, Switch ON, f = 240 MHz − −40 − dB OIRR Off Isolation (Note 3) RL = 50 /C0087, Switch OFF, f = 240 MHz − −24 − dB tOVP Response Time RLOAD = 50 /C0087, Vsw = 3 V to 6 V (slew rate >10 V/1 /C0109s), measure OV threshold to 90% OVP trigger level of output falling − 0.2 1 /C0109s

www.onsemi.com AC CHARACTERISTICS (continued) Symbol UnitTA = −40/C0053C to 85/C0053C PowerConditionParameterSymbol UnitMaxTypMinPowerConditionParameter USB SWITCH tRecovery Recovery Debounced time (Note 3) RLOAD = 50 /C0087, Vsw = 6 V to 3 V (slew rate < 10 V/1 /C0109s), measure OV threshold to 90% output rising − 30 − us tPD Propagation Delay (Note 3) RL = 50 /C0087, CL = 5 pF − 100 − ps tSK(P) Skew of Opposite Transitions of the Same Output (Note 3) RL = 50 /C0087, CL = 5 pF − 10 − ps tJ Total Jitter (Note 3) VSW = 0.4 VdiffPP, RL = 50 /C0087, CL = 5 pF, tR = tF = 500 ps (10 − 90%) @ 480 Mbps (PBRS = 215 – 1) − 200 − ps UART SWITCH tON Turn−on time (Note 3) UART = 1.8 V, Rload = 50 /C0087 − 50 − /C0109s tOFF Turn−off time (Note 3) UART = 1.8 V, Rload = 50 /C0087 − 0.4 − /C0109s TBBM Break−Before−Make (Note 3) USB → UART, USB = 50 /C0087, UART=50 /C0087 Audio → UART − 50 − /C0109s TEN Enable Time (Note 3) DP/R = DN/L = 1 V, DP/DN = 50 /C0087 to GND, S[1, 0] from 11 to 10 − 200 − /C0109s TDis Disable Time (Note 3) DP/R = DN/L = 1 V, DP/DN = 50 /C0087 to GND, S[1, 0] from 10 to 11 − 300 − /C0109s tOVP Response Time RLOAD = 50 /C0087, Vsw = 3 V to 6 V (slew rate > 10 V/1 /C0109s), measure OV threshold to 90% OVP trigger level of output falling − 0.2 1 /C0109s BW Bandwidth (Note 3) RL = 50 /C0087 − 400 − MHz 3. Guaranteed by characterization, not production tested. Symbol Parameter Condition Power TA = −40/C0053C to 85/C0053C UnitMin Typ Max AUDIO PATH SWITCH CON_USB/Audio/UART On Capacitance (Common Port) (Note 4) f =1MHz, 240 MHz, 100 mVPK−PK, 100 mV DC bias 3.3 − 7 − pF COFF_USB/Audio/UART Off Capacitance (Common Port) (Note 4) f = 1MHz, 240MHz, 100 mVPK−PK, 100 mV DC bias 3.3 − 7 − pF COFF_USB Off Capacitance (Non−Common Ports) (Note 4) f = 240 MHz, 100 mVPK−PK, 100 mV DC bias 3.3 − 2.5 − pF COFF_Audio Off Capacitance (Non−Common Ports) (Note 4) f = 1 MHz, 100 mVPK−PK, 100 mV DC bias 3.3 − 3.5 − pF COFF_UART Off Capacitance (Non−Common Ports) (Note 4) f = 1 MHz, 100 mVPK−PK, 100 mV DC bias 3.3 − 3.5 − pF CIN EN,SEL Pin Capacitance (Note 4) f = 1 MHz, 100 mVPP, 100 mV DC bias S1, S0 0 − 2.5 − pF 4. Guaranteed by characterization, not production tested.

Application Information

Over−V oltage Protection The FSA1153 features over−voltage protection (OVP) on the receptacle side pins DN_L and DP_R which will switch off the internal signal routing path if the input voltage exceeds the OVP threshold. When an over voltage condition has occurred the switch will open immediately and remain open until the over voltage condition is removed.

WLCSP12, 1.41x1.575x0.599 CASE 567WM ISSUE O DATE 31 MAY 2018 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON92156GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1WLCSP12, 1.41x1.575x0.599 © Semiconductor Components Industries, LLC, 2018 www.onsemi.com

www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative