FS4 GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURE SMA ／／ ／／DO-214AC Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260 ℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency MECHANICAL DATA Terminal ：Solder plated, solderable per MIL-STD-750, Method 2026 Case ： JEDEC DO-214AC molded plastic over glass passivated chip Polarity ：Color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 ℃, unless otherwise stated, for capacitive load, derate current by 20 ％) SYMBOL FS4 units Maximum Recurrent Peak Reverse Voltage Vrrm 400 V Maximum RMS Voltage Vrms 280 V Maximum DC blocking Voltage Vdc 400 V Maximum Average Forward Rectified Current 3/8 ″lead length at TL =110℃ If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Ifsm 30.0 A Maximum Forward Voltage at rated forward current Vf 1.25 V Maximum DC Reverse Current Ta =25 ℃ at rated DC blocking voltage Ta =100 ℃ Ir 10.0 100.0 μA μA Maximum Reverse Recovery Time (Note1 ) Trr 25 nS Typical Junction Capacitance (Note 2) Cj 18.0 pF Typical Thermal Resistance (Note 3) R(jl) 30.0 ℃/W Storage and Operating Junction Temperature Tstg, Tj -50 to +150 ℃ Note ： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area 1 1Rev.A1 www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES FS4 2 Rev.A1 www.gulfsemi.com