Datasheet search site | www.alldatasheet.com
Document overview
- PDF pages: 2
Technical content
© 2016 Littelfuse Protection Relays & Controls Flashers and Tower Lighting Controls Flashers www.littelfuse.com/fs200 Rev: 1-A-062316 Specifications Wiring Diagram FS200 SERIES
Description
The FS200 Series may be used to control inductive, incandescent, or resistive loads. Factory fixed flash rate of 45 or 90 FPM or may be ordered with a fixed custom flash rate ranging from 10 to 180 FPM. Encapsulation provides protection against shock, vibration, and humidity. Uniform performance, high inrush current capability, and low RFI, make this series ideal for general industrial applications. Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. Features & Benefits FEATURES BENEFITS 3A steady, 30A inrush, SPST output contact Provides direct control of inductive, incandescent, or resistive loads T otally solid state and encapsulated No moving parts to arc and wear out over time and encapsulated to protect against shock, vibration, and humidity High inrush current capability and low RFI Ideal for general industrial applications Accessories P1023-6 Mounting bracket The 90° orientation of mounting slots makes installation/removal of modules quick and easy. P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. P1015-18 Quick Connect to Screw Adapter Screw adapter terminal designed for use with all modules with 0.25 in. (6.35 mm) male quick connect terminals. C103PM (AL) DIN Rail 35 mm aluminum DIN rail available in a 36 in. (91 .4 cm) length. P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two #10 screws.
Ordering Information
MODEL INPUT RATING FLASH RATE FS219-45 12VDC ± 20% 3A 45 FPM FS224 24VDC ± 20% 3A 90 FPM If you don’t find the part you need, call us for a custom product 800-843-8848 V = Voltage L = Load
© 2016 Littelfuse Protection Relays & Controls Flashers and Tower Lighting Controls Flashers www.littelfuse.com/fs200 Rev: 1-A-062316 FS200 SERIES FLASHER (OFF FIRST) V = Voltage R = Reset L = Load T1 = ON Time T2 = OFF Time T1 ≅ T2 Flasher Function DiagramSpecifications Technical Data Operation OFF/ON solid-state flasher (continuous duty) Flash Rate Fixed at 90 FPM ±10% Custom Flash Rate 10 - 180 FPM ON/OFF Ratio ≅ 50% Input Voltage 12, 24, 36, 48, or 110VDC Output Load Type Inductive, resistive, or incandescent Maximum Load Rating 0.25 - 3A steady state OFF State Leakage Current 12 & 24VDC ≤ 250 µA Inrush 10 times steady state current Mechanical Mounting Surface mount with one #10 (M5 x 0.8) screw Dimensions H 50.8 mm (2”); W 50.8 mm (2”); D 30.7 mm (1.21”) Termination 0.25 in. (6.35 mm) male quick connect terminals Protection Circuitry Encapsulated Environmental Operating/Storage Temperature -20° to 60°C / -40° to 85°C Weight ≅ 2.2 oz (62 g)