Datasheet search site | www.alldatasheet.com
Document overview
- PDF pages: 2
Technical content
© 2016 Littelfuse Protection Relays & Controls Flashers and Tower Lighting Controls Flashers www.littelfuse.com/fs100med Rev: 1-A-062316 Specifications Wiring Diagram V = Voltage L = Load FS100 SERIES
Description
The FS100 Series (medium power) may be used to control inductive, incandescent, or resistive loads. Input voltages of 24, 120, or 230VAC are available. Fixed flash rates in stock range from 30, 50, 60, and 90 FPM, with custom flash rates ranging from 10 to 300 FPM. Encapsulation provides protection against shock, vibration, and humidity. This group of solid-state flashers has proven reliability with years of use throughout the world. Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. Features & Benefits FEATURES BENEFITS 3A steady, 30A inrush current Provides direct control of inductive, incandescent, or resistive loads T otally solid state and encapsulated No moving parts to arc and wear out over time and encapsulated to protect against shock, vibration, and humidity Accessories P1023-6 Mounting bracket The 90° orientation of mounting slots makes installation/removal of modules quick and easy. P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. P1015-18 Quick Connect to Screw Adapter Screw adapter terminal designed for use with all modules with 0.25 in. (6.35 mm) male quick connect terminals. C103PM (AL) DIN Rail 35 mm aluminum DIN rail available in a 36 in. (91 .4 cm) length. P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two #10 screws. L1 N/L2 Medium Power Flasher
Ordering Information
If you don’t find the part you need, call us for a custom product 800-843-8848
© 2016 Littelfuse Protection Relays & Controls Flashers and Tower Lighting Controls Flashers www.littelfuse.com/fs100med Rev: 1-A-062316 FS100 SERIES FLASHER (OFF FIRST) V = Voltage R = Reset L = Load T1 = ON Time T2 = OFF Time T1 ≅ T2 Flasher Function DiagramSpecifications Technical Data Operation OFF/ON solid-state flasher (continuous duty) Flash Rate Fixed at 90 FPM ±10% Custom Flash Rates 10 - 300 FPM ±10% ON/OFF Ratio ≅ 50% Input Voltage/Frequency 24, 120, or 230VAC ±15% / 50/60 Hz Output Load Type Inductive, resistive, or incandescent Output Fullwave AC, solid state, SPST Maximum Load Rating 3A steady state Inrush 10 times steady state current Mechanical Mounting Surface mount with one #10 (M5 x 0.8) screw Dimensions H 50.8 mm (2”); W 50.8 mm (2”); D 30.7 mm (1.21”) Termination 0.25 in. (6 .35 mm) male quick connect terminals Protection Circuitry Encapsulated Environmental Operating/Storage Temperature -20° to 60°C / -40° to 85°C Weight ≅ 2.2 oz (62 g)