FRF1601CT GWSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
16.0 AMP FAST RECOVERY RECTIFIERS
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current
FEATURES
Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 8.0A Maximum DC Reverse Current Tc=25 C at Rated DC Blocking Voltage Tc=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) 16.0 150 10.0 200 -65 +150 A A V nS pF C NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. * Low forward voltage drop * High current capability * High reliability * High surge current capability FRF1601CT THRU FRF1606CT 1.3 250 500 150 VOLTAGE RANGE 50 to 800 Volts CURRENT
16.0 Amperes
V 50 100 200 400 600 800 50 100 200 400 600 800 35 70 140 280 420 560 V V * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Lead solderable per MIL-STD-202, method 208 guranteed * Polarity: As Marked * Mounting position: Any Operating and Storage Temperature Range TJ, TSTG A A UNITS FRF FRF FRF FRF FRF FRF 1601CT 1602CT 1603CT 1604CT 1605CT 1606CT at Tc=75 C ITO-220(FULLY INSULATED) Dimensions in inches and (millimeters) .412 .248 .122 (3.1) .189 (4.8) .158 .610 .550 .100 (2.54) .060 .035 .108 (10.5) (6.3) (4.0) (15.5) (14.0)(1.5) (0.9) (2.75) MAX. MAX. MAX. MIN. MAX. MAX. 3.4 MAX. HOLE THRU f +PIN 1 PIN 3 PIN 2 CASE MAX. MAX. .114(2.9) .098(2.5) 196
0.1 500 RATING AND CHARACTERISTIC CURVES (FRF1601CT THRU FRF1606CT) CHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr D.U.T. Single Phase Half Wave 60Hz Resistive Or Inductive Load CASE TEMPERATURE ( C) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W Tj=25 C FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) 140 120 100 .01 .05 .1 .5 1 5 10 50 100 0 20 40 60 80 100 120 140 160 180 200 FIG.1-TYPICAL FORWARD FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 150 200 250 NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method PEAK FORWARD SURGE CURRENT,(A) 197