FRD POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
(888) IPD-CONVerters G (888) 473-2668 G www.ipdconverters.com C-64 10 20 30 40 50 60 70 80 90 10 LOAD % EFFICIENCY % EFF. FRD4812 EFF. FRD4815 10 20 30 40 50 60 70 80 90 10 LOAD % EFFICIENCY % EFF. FRD2812 EFF. FRD2815) TECHNICAL SPECIFICATIONS DESCRIPTION FEATURES Efficiency vs. Load (48V Input) Efficiency vs. Load (28V Input) FRD SERIES - DUAL OUTPUT, 5 WATT Wide Input Range Trim and Enable Pins Remote Sense Pins 500V Isolation Short Circuit Protection 6-Sided Shielding Notes † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. FRD dual output DC/DC converters offer excellent regulation and isolation in an industry standard package. Available in several input versions, the FRD is perfect for industrial, datacom, or telecom applications. The FRD features short circuit protection, six-sided shielding, and 500 VDC isolation. Please see the FRS series for single output applications. Input Voltage Range 5V, 12V, 24V, 28V, and 48V Nominal See selection chart for specific input range. Reflected Ripple 20% I in Max. Reverse Input Current 100% I in Max. General Switching Frequency 20 kHz Isolation Input - Output 500 VDC Isolation Resistance - Input to Output 10 9 Ohms Case Temperature Operating Range -25 To +85°C Storage Range -40 To +125°C Humidity Max, Non-Condensing 95% Temperature Coefficient ±0.02%/°C Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz Safety Consult Factory Weight (Approx.) 2.2 oz Output Setpoint Accuracy ±1% V out Line Regulation V in Min. - V in Max., I out Rated ±0.15% V out Load Regulation I out Min. - I out Max., V in Nom. ±0.15% V out I out Rated Minimum Output Current 10 % l out Rated Short Circuit Protection 1 Continuous
Natural convection 10.3 °C/W 100 LFM 7.7 °C/W 200 LFM 6.3 °C/W 300 LFM 5.1 °C/W 400 LFM 4.1 °C/W Tolerances Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. FRD SERIES - DUAL OUTPUT, 5 WATT MECHANICAL DRA WING 1+ V in 2- V in 3+ V out
4 Common
Inches: (Millimeters) Pin: ± 0.002 ± 0.05 Case: (Tolerances as listed unless otherwise specified.) Pin Function MODELS - (See the last page of this file for options.) Vin (Volts) Vin Range (Volts) Iin Max .* (Amps) Vout (Volts) Iout Rated (Amps) Ripple & Noise Pk-Pk (mV) Efficiency Typ. ** Model 4.65 - 5.50 4.65 - 5.50 10.90 - 13.20 10.90 - 13.20 21.60 - 26.40 21.60 - 26.40 25.20 - 30.80 25.20 - 30.80 43.20 - 52.80 43.20 - 52.80 2.01 2.04 0.85 0.86 0.43 0.45 0.37 0.38 0.21 0.22 ±12 ±15 ±12 ±15 ±12 ±15 ±12 ±15 ±12 ±15 ±0.23 ±0.19 ±0.23 ±0.19 ±0.23 ±0.19 ±0.23 ±0.19 ±0.23 ±0.19 65% 66% 66% 67% 66% 65% 69% 71% 65% 66% FR D 51 2 FR D 51 5 FR D 12 12 FR D 12 15 FR D 24 12 FR D 24 15 FR D 28 12 FR D 28 15 FR D 48 12 FR D 48 15 * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. /K31/K2E/K34/K30/K22 /K31/K2E/K31/K30/K22 /K30/K2E/K38/K30/K30/K22 /K30/K2E/K32/K30/K30/K22 /K30 /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K32/K2E/K30/K30/K22 /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K32/K2E/K30/K30/K22 /K30/K2E/K31/K38/K22/K28/K34/K2E/K36/K6D/K6D/K29 /K4D/K49/K4E/K2E /K30 /K35 /K34 /K32 /K31 /K33 /K28/K31/K2E/K30/K6D/K6D/K29 /K44/K49/K41 /K30/K2E/K30/K34/K30/K22 /K28/K31/K30/K2E/K32/K6D/K6D/K29 /K30/K2E/K34/K30/K22 /K30/K2E/K35/K30/K30/K22 /K28/K31/K32/K2E/K37/K6D/K6D/K29 /K30/K2E/K31/K30/K30/K22 /K28/K32/K2E/K35/K6D/K6D/K29 /K2D/K30/K2E/K33/K30/K30/K22 /K28/K2D/K37/K2E/K36/K6D/K6D/K29 /K28/K33/K35/K2E/K36/K6D/K6D/K29 /K28/K32/K30/K2E/K33/K6D/K6D/K29 /K28/K35/K2E/K31/K6D/K6D/K29 /K28/K32/K37/K2E/K39/K6D/K6D/K29 /K42/K4F/K54/K54/K4F/K4D /K56/K49/K45/K57
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD TTL “Low” Turns Module ON TTL “High” Turns Module OFF Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Term inal Strip TS XW S, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180” (4.6mm) 0.110” (2.8mm) Pin Length 8 All Units (Except SMS) 0.150” (3.8mm) Pin Length 9 All Units (Except SMS) 0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.