FR804

FR801 DAESAN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Features

• Fast switching
• Low leakage
• Low forward voltage drop
• High current capability
• High current surge
• High reliability Maximum Ratings And Electrical Characteristics
• Case : JEDEC TO-220A molded plastic body
• Terminals : Lead solderable per MIL-STD-750, method 2026
• Polarity : As marked
• Mounting Position : Any
• Weight : 0.08 ounce, 2.24 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. (3) Thermal resistance from junction to case, single side cooled. CURRENT 8.0 Amperes VOLTAGE 50 to 1000 Volts Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current at TC=55¡É Maximum instantaneous forward voltage at 8.0A VRRM Volts Symbols Units 1.3 3.0 VF VRMS 8.0 Amps Amps IFSM TJ TSTG -55 to +150 ¡É ¡É/W Volts Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (Note 1) TC=25¡É TC=125¡É Typical junction capacitance (Note 2) TJ=25¡É Typical thermal resistance (Note 3) Operating junction and storage temperature range FR 801 100 250 Volts ¥ìA ns pF I(AV) IR Trr 60CJ 100 FR 802 100 200 FR 803 140 200 400 FR 804 280 400 600 FR 805 420 600 800 FR 806 560 800 1000 FR 807 700 1000 500150 150 Dimensions in inches and (millimeters) TO-220A .412 .248 .040 .158 .595 .550 .200 .051 .040 .108 (10.5) (6.3) (1.0) (4.0) (15.1) (14.0) (5.08) (1.3) (1.0) (2.75) MAX. MAX. MAX. MAX. MIN. MAX. MAX. 3.8 +.2 HOLE THRU f ++PIN 1 PIN 2 CASE Case Positive .180 .050 .120 (4.6) (1.27) (3.05) PIN 1 PIN 2 CASE Case Negative Suffix "R" R¥èJC

RATINGS AND CHARACTERISTIC CURVES FR801 THRU FR807 trr 1cm NONINDUCTIVE NONINDUCTIVE DUT OSCILLOSCOPE (NOTE 1 ) (+ ) 50Vdc (approx) (-) NOTES: 1 . RISE TIME = 7ns max. INPUT IMPEDANCE= 1 MEGOHM 22pf 2 . RISE TIME = 10ns max. SOURSE IMPEDANCE = 50ohmsf +0.5A -1.0A SET TIME BASE FOR 5/ 10ns / cm NONINDUCTIVE PULSE GENERATOR ( NOTE 2 ) -0.25A FIG . -REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM1 FIG . 2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT ( A ) FIG . 5 - TYPICAL INSTANTANEOUS FORWARD CARACTERISTICS 0 50 100 150 O LEAD TEMPERATURE . ( C ) INSTANTANEOUS FORWARD VOLTAGE . ( A ) INSTANTANEOUS FORWARD VOLTAGE . ( A ) 400 200 100 0.1 0.2 0.4 1 2 5 10 20 50 1 00 150 125 100 0.1 0.5 1.0 5 10 50 100 500 1000 120 100 0 20 40 60 80 100 120 140 100 1.0 PERCENT OF RATED PEAK REVERSE VOLTAGE. ( % )REVERSE VOLTAGE . ( V ) FIG . 4 - TYPICAL HUNCTION CAPACITANCE NUMBER OF CYCLES AT 60Hz FIG . 3 - MAXIMUM NON - REPETITIVE FORWARD SURGE CURRENT FIG . 6 - TYPICAL REVERSE CHARACTERISTICS PEAK FORWARD SURGE CURRENT . ( A ) CAPACITANCE . ( pF ) INSTANTANEOUS REVERSE CURRENT . ( A) 8.3ms Single Half Sine Wave JEDEC Method O TC = 125 C Pulse Width=300 s 1% Duty Cycle O Tj=25 C O Tj=125 C O Tj=75 C O Tj=25 C O Tj=25 C f = 1.0MHz Vsig = 50mVp-p