FR801 MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts FR801 THRU FR806 CURRENT 8.0 Ampere

FEATURES

  • Glass passivated chip junction
  • Low cost construction
  • Fast switching for high efficiency
  • Low reverse leakage
  • High forward surge current capacity
  • High temperature soldering guaranteed
  • 260℃/10 second,0.375″(9.5mm)lead length
  • at 5 lbs (2.3kg) tension MECHANICAL DATA
  • Case: Transfer molded plastic
  • Epoxy: UL94V-0 rate flame retardant
  • Polarity: Color band denotes cathode end
  • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
  • Mounting position: Any
  • Weight: 0.064ounce, 1.81 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS FR801 FR802 FR803 FR804 FR805 FR806 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 Volts Maximum Average Forward Rectified Current 0.375″(9.5mm) lead length at Tc=100℃ I(AV) 8.0 Amps Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) IFSM 200 Amps Maximum Instantaneous Forward Voltage at 8.0A VF 1.3 Volts TA = 25℃ 10 Maximum DC Reverse Current at rated DC Blocking Voltage per element TA = 100℃ IR 500 µA Maximum Reverse Recovery Time (NOTE 3)Tj=25 ℃ trr 150 250 500 nS Typical Junction Capacitance (NOTE 1) CJ 50 pF Typical Thermal Resistance (NOTE 2) RθJC 3.0 ℃/W Operating and Storage Temperature Range TJ (-55 to +150) ℃ Storage Temperature Range TSTG (-55 to +150) ℃ Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2. Thermal Resistance from Junction to CASE 3. Reverse Recovery Test Conditions: IF =0.5A, IR =1.0A, IRR =0.25A Dimensions in inches and (millimeters) TO-220AC

E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts FR801 THRU FR806 CURRENT 8.0 Ampere RATING AND CHRACTERISTIC CURVES FR801G THRU FR806 FIG.2-MAXIMUM NON-REPETITIVE PEAK 100 Tjmax 402010 CHARACTERISTICS 300 CURRENT, (A) PEAK FORWARD SURGE NUMBER OF CYCLES AT 60 Hz 8.3ms Single Half Sine-Wave (JEDEC Method) T= FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE DERATING CURVE FIG.1-TYPICAL FORWARD CURRENT 150 17512575 100 8.0 Single Phase Inductive Load Half Wave 60Hz Resistive or AVERAGE FORWARD CURRENT, (A) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS AMBIENT TEMPERATURE, ( ° C) 8040 100 (μA) 1.2 JT =25° C 0.80.4 1% Duty Cycle Pulse Width=300us (A)(A) INSTANTANEOUS FORWARD VOLTAGE,(V) REVERSE VOLTAGE,(V) INSTANTANEOUS FORWARD CURRENT, INSTANTANEOUS REVERSE CURRENT, 1.6 0.375 ″(9.5mm) 468

1 Cycle

REVERSE VOLTAGE,(%) 0.1 0.01 1.0 0.1 0.01 4.0 12.0 Lead Length 200 100 0.61.01.41.8 60200 120140 T =25 ° CJ 50/100ns/cm SET TIME BASE FOR -1.0A -0.25A +0.5A (+) (-) (-) (approx.) (+)

25 Vdc

10Ω NONINDUCTIVENONINDUCTIVE 50Ω (NOTE 1) OSCILLOSCOPE (NOTE 2) GENERATIOR PULSED.U.T. INDUCTIVE NON 2.Rise time=10ns max. Source Impedance= 50 ohms 1 magohm. 22pF NOTES : 1.Rise Time=7ns mas. Input Impedance= REVERSE RECOVERY TIME CHARACTERISTIC F1G.6-TEST CIRCUIT DIAGRAM AND 1cm Trr T =100 ° CJ J 100101.0 T =25° C f=1MHz JUNCTION CAPACITANCE,(pF) Vsig=50mVp-p 0.1 FIG.5-TYPICAL JUNCTION CAPACITANCE 100 1000