FR201GPT CHENMKO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. FR201GPT THRU FR207GPT DO-15 DO-15Dimensions in inches and (millimeters) CHENMKO ENTERPRISE CO.,LTD VOLTAGE RANGE 50 - 1000 Volts CURRENT 2.0 Amperes ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) NOTES : 2001-6 MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current at TA = 55oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO CJ TJ,STG IFSM UNITS Volts Volts Volts Amps2.0 -65 to +175 Amps pF oC 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A FR201GPT FR203GPT 200 140 200 FR204GPT 400 280 400 FR205GPT 600 420 600 FR206GPT 800 560 800 FR207GPT 1000 700 1000 FR202GPT 100 100 * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High reliability * Low leakage * Low forward voltage drop * High current capability * High surge capability * Fast switching * Glass passivated junction Case: JEDEC DO-15 molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.38 gram MECHANICAL DATA Maximum DC Reverse Current at Rated DC Blocking Voltage at TA = 25oC Maximum Full Load Reverse Current Average, Full Cycle 0.375" (9.5mm) lead length at TL = 55oC CHARACTERISTICS SYMBOL UNITS 1.3 5.0 100 uAmps uAmps VoltsMaximum Instantaneous Forward Voltage at 2.0 A DC VF 150 250 500 nSecMaximum Reverse Recovery Time (Note 2) trr IR 0.034(0.9) 0.028(0.7) DIA. 0.140(3.6) 0.104(2.6) 0.300(7.6) 0.230(5.8) 1.0(25.4) MIN. 1.0(25.4) MIN. DIA. GLASS PASSIVATED FAST RECOVERY RECTIFIER FR201GPT FR203GPT FR204GPT FR205GPT FR206GPT FR207GPTFR202GPT
RATING CHARACTERISTIC CURVES ( FR201GPT THRU FR207GPT ) FIG. 1 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC FIG. 3 - TYPICAL REVERSE CHARACTERISTICS FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 6 - TYPICAL JUNCTION CAPACITANCEFIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT, (uA)PEAK FORWARD SURGE CURRENT, ( A ) JUNCTION CAPACITANCE, ( pF ) REVERSE VOLTAGE, ( V )NUMBER OF CYCLES AT 60 Hz INSTANTANEOUS FORWARD VOLTAGE, ( V )PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) INSTANTANEOUS FORWARD CURRENT, ( A ) NONINDUCTIVE NONINDUCTIVE D.U.T( + )
25 Vdc
(approx) ( - ) 1 NON- INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) ( - ) ( + ) NOTES: 1. Rise Time = 7 ns max. Input Impedance = 1 megohm. 22 pF. 2. Rise Time = 10 ns max. Source Impedlance= 50 ohms. +0.5A -0.25A -1.0A trr 1cm SET TIME BASE FOR 50/100 nS/cm AVERAGE FORWARD CURRENT, ( A ) AMBIENT TEMOERATURE ( O C ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60Hz Resistive or Inductive Load 2.5 0.5 1.0 1.5 2.0 250 50 75 100 125 150 175 1.0 0.1 .01 .001 Pulse Width = 300uS 1% Duty Cycle TJ =25oC TJ =25oC TJ =25oC .01 1.0 100 200 100 .1 .2 .4 1.0 2 4 10 20 40 1001 2 5 10 20 50 100 8.3ms Single Half Sine-Wave (JEDEC Method) 50 10