FR201

FR201_1 TSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Dimensions in inches and (millimeters) Version: A06 FR201 - FR207 2.0 AMPS. Fast Recovery Rectifiers DO-15 F e a t u r e s /cuspopen High efficiency, Low VF /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability /cuspopen Low power loss. M e c h a n i c a l D a t a /cuspopen Cases: Molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Lead: Pure tin plated, Lead free., solderable per MIL-STD-202, Method 208 guaranteed /cuspopen Polarity: Color band denotes cathode end /cuspopen High temperature soldering guaranteed: 260 oC /10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension /cuspopen Weight: 0.40 gram Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol FR 201 FR 202 FR 203 FR 204 FR 205 FR 206 FR

207 Units

Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current.375”(9.5mm) Lead Length @TA = 55 o C I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 60 A Maximum Instantaneous Forward Voltage @ 2.0A VF 1.2 V Maximum DC Reverse Current @ TA=25 oC at Rated DC Blocking Voltage @ TA=125 oC IR 5.0 150 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 nS Typical Junction Capacitance ( Note 2 ) Cj 30 pF Typical Thermal Resistance R θJA RθJL RθJC oC/W Operating Temperature Range T J -65 to +150 oC Storage Temperature Range T STG -65 to +150 oC Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A

RATINGS AND CHARACTERISTIC CURVES (FR201 THRU FR207) FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 21 0 2 0 5 50 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1 2 4 6 10 100 604020 100 REVERSE VOLTAGE. (V) Tj=25 C0 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT AMPERES 250 50 75 100 125 150 175 1.0 0.5 1.5 2.0 AMBIENT TEMPERATURE. ( C) o Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length FIG.5- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) .03 0.1 0.3 1.0 3.0 .01 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm Version: A06 FIG.2- TYPICAL REVERSE CHARACTERISTICS PER LEG 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1000 100 1.0 0.1 Tj=125 C0 Tj=25 C0 Tj=75 C0 INSTANTANEOUS REVERSE CURRENT .( A )