FR151 TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen High reliability /cuspopen High surge current capability Mechanical Data /cuspopen Cases: Molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Lead: Axial leads, solderable per MIL- STD-202, Method 208 guaranteed /cuspopen Polarity: Color band denotes cathode end /cuspopen High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension /cuspopen Weight: 0.40 gram DO-15 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol FR 151 FR 152 FR 153 FR 154 FR 155 FR 156 FR 157 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length A = 55℃ I(AV) 1.5 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage @ 1.5A VF 1.2 V Maximum DC Reverse Current @ T A=25℃ at Rated DC Blocking Voltage @ T A=100℃ IR 5.0 100 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 nS Typical Junction Capacitance ( Note 2 ) Cj 20 pF Typical Thermal Resistance ( Note 3 ) RθJA 60 OC/W Operating Temperature Range TJ -65 to +150 ℃ Storage Temperature Range TSTG -65 to +150 ℃ Notes:1. Reverse Recovery Test Conditions: I F=0.5A, IR=1.0A, IRR=0.25A 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B.
- 403 - FIG.5- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50/c87 NONINDUCTIVE /c49/c87 NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) DUT (+) 50Vdc (approx) (-) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms (-) (+) 10/c87 NONINDUCTIVE -1.0A -0.25A +0.5A trr 1cm SET TIME BASE FOR 5/ 10ns/ cm RATINGS AND CHARACTERISTIC CURVES (FR151 THRU FR157) FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 21 0 4 6 40 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.3- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) .03 0.1 0.3 1.0 3.0 .01 FORWARD VOLTAGE. (V) Tj=25 C Pulse Width=300 s 1% Duty Cycle o FIG.4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1 2 4 6 10 100 604020 100 REVERSE VOLTAGE. (V) Tj=25 C0 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT AMPERES 250 50 75 100 125 150 175 1.0 1.5 2.0 AMBIENT TEMPERATURE. ( C) o Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length