FR151 PFS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

VOLTAGE RANGE 50 to 1000 Volts FR151 THRU FR157 CURRENT 1.5 Ampere Web Site:

FEATURES

  • Low coat construction
  • Fast switching for high efficency.
  • Low reverse leakage
  • High forward surge current capability
  • High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension MECHANICAL DATA
  • Case: Transfer molded plastic
  • Epoxy: UL94V-O rate flame retardant
  • Polarity: Color band denotes cathode end
  • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
  • Mounting position: Any
  • Weight: 0.012 ounce, 0.33 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25OC ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS FR 151 FR 152 FR 153 FR 154 FR 155 FR 156 FR

157 UNITS

Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 75 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at TA= 75℃ I(AV) 1.5 Amp Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) IFSM 60 Amps Maximum Instantaneous Forward Voltage @ 1.5A VF 1.3 Volts TA = 25℃ 5.0 Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 100℃ IR 200 µA Maximum Reverse Recovery Time (Note 3) TJ=25℃ trr 150 250 500 ns Typical Junction Capacitance (Note 1) CJ 25 pF Typical Thermal Resistance (Note 2) RθJA 50 ℃/W Operating Junction Temperature Range TJ (-55 to +150) ℃ Storage Temperature Range TSTG (-55 to +150) ℃ Notes: 1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits. 3.Reverse Recovery Test Conditions:If=0.5A,Ir=1.0A,Irr=0.25A DIA..034(0.9) .028(0.7) DIA..140(3.6) .104(2.6) .300(7.6) .230(5.8) 1.0(25.4) MIN. 1.0(25.4) MIN. (millimeters)Dimensions in inches and DO-15 WWW.PS-PFS.COM

VOLTAGE RANGE 50 to 1000 Volts FR151 THRU FR157 CURRENT 1.5 Ampere Web Site: 1.5 FIG.2-MAXIMUM NON-REPETITIVE PEAK 100602010 CHARACTERISTICS CURRENT, (A) PEAK FORWARD SURGE NUMBER OF CYCLES AT 60 Hz 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tjmax FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE DERATING CURVE FIG.1-TYPICAL FORWARD CURRENT 150 17512575 100 1.0 0.5 Single Phase Inductive Load Half Wave 60Hz Resistive or AVERAGE FORWARD CURRENT, (A) AMBIENT TEMPERATURE, (° C) 100 100 FIG.5-TYPICAL JUNCTION CAPACITANCE 101.00.1 REVERSE VOLTAGE,(V) TJ=25° C F=1MHz CAPACITANCE,(pF) 0.375"(9.5mm)Lead Length 4064 80 Vsig=50mVp-p RATING AND CHRACTERISTIC CURVES FR151 THRU FR157 0.01 jT =25° C 120 140 INSTANTANEOUS REVERSE CURRENT, PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) (mA) 0 20 0.1 1006040 80 T =100° Cj FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE REXOVERY TIME CHARACTERISTIC NOTE: 1.Rise Time =7ns max.Input Impedance=1megohm.22pF 2.Rise time=10ns max.Source Impedance=50 ohms SET TIME BASE FOR 50 /100NS /cm -1.0A 0.25A +0.5A OSCILLOSCOPE (NOTE 1) PULSE GENERATIOR (NOTE 2) (-) NON INDUCTIVE 10Ω NONINDUCTIVE 50Ω NONINDUCTIVE D.U.T (-) （approx）

25 Vdc

(+) 2.01.81.6 INSTANTANEOUS FORWARD CURRENT, INSTANTANEOUS FORWARD VOLTAGE,(V) (A)(A) 0.01 0.1 1.0 Pulse Width=300us 1% Duty Cycle 0.6 0.8 1.0 1.2 Tj =25° C 1.4 FORWARD CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS WWW.PS-PFS.COM