FR151 DAESAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Fast switching speed
- Low leakage
- Low forward voltage drop
- High current capability
- High current surge
- High reliability Maximum Ratings And Electrical Characteristics
- Case : JEDEC DO-15 molded plastic body
- Terminals : Plated axial lead solderable per MIL-STD-750, method 2026
- Polarity : Color band denotes cathode end
- Mounting Position : Any
- Weight : 0.014 ounce, 0.39 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 1.5 Amperes VOLTAGE 50 to 1000 Volts Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current 0.375"(9.5mm) lead length TA=75¡É Maximum instantaneous forward voltage at 1.5A VRRM Volts Symbols Units 1.3VF VRMS 1.5 Amps Amps IFSM TJ TSTG -65 to +150 ¡É Volts Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction and storage temperature range FR 151 5.0 250 Volts ¥ìA ns pF I(AV) IR Trr 15.0CJ 100 FR 152 100 200 FR 153 140 200 400 FR 154 280 400 600 FR 155 420 600 800 FR 156 560 800 1000 FR 157 700 1000 Maximum full load reverse current full cycle average. 0.375"(9.5mm) lead length at TL=55¡É 500150 60.0 40.0 Dimensions in inches and (millimeters) DO-15 1.0(25.4) MIN. 1.0(25.4) MIN. 0.300(7.6) 0.230(5.8) 0.034(0.9) 0.028(0.7) DIA. 0.140(3.6) 0.104(2.6) DIA.
FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 1250 25 1501007550 175 AVERAGE FORWARD CURRENT(A) AMBIENT TEMPERATURE ( ¡É) SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.5 1.0 1.5 2.5 2.0 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT(AMPERES) INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0.1 0.01 0.03 0.3 TJ=25¡É Pulse Width=300mS 1% Duty Cycle FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT(AMPERES) 1 2 1006010864 4020 8.3m SINGLE HALF SINE WAVE (JEDEC Method) FIG.4-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE. (V) JUNCTION CAPACITANCE(pF) 100.1 0.2 4 200.4 21 40 100 TJ=25¡É 100 200 FIG.5-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC OSCILLOSCOPE (NOTE1) NON IN- DUCTIVE 50W NON INDUCTIVE 10W NON INDUCTIVE D.U.T. 25Vdc (APPROX) ( + ) NOTES:1.Rise Time=7ns max. input impedance=1 megohm 22pF 2.Rise Time=10ns max. source impedance =50 ohms PULSE GENERATOR (NOTE2) ( ) Trr 1cm SET TIME BASE FOR 50/100 ns/cm -1.0A +0.5A -0.25A RATINGS AND CHARACTERISTIC CURVES FR151 THRU FR157