FR02FR10P-S NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 02-08 10mm Ultra-Thin SMT DIP Rotaries Series FR02 Distinctive Characteristics Slim .150” (3.8mm) body has the lowest profile in the industry and allows close stacking of PC boards. Highly visible legends and screwdriver actuator with arrow position indication provide trouble-free code setting. Detent mechanism gives crisp, positive action for accurate switch setting. Use of heat resistant resin allows infrared convection reflow soldering. Gull-winged terminals ensure mechanical stability during soldering and simplify solder joint inspection. Cam activated movable contact and gold contacts assure contact reliability and continuity. Tape-reel packaging meets EIA-481-2 Standard. Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0059” (0.15mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.) Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 02-08 10mm Ultra-Thin SMT DIP Rotaries Series FR02 General Specifications Electrical Capacity (Resistive Load) Switching Rating: 100mA @ 5V DC Nonswitching Rating: 100mA @ 50V DC Other Ratings Contact Resistance: 100 milliohms maximum for circuit; 30 milliohms maximum for contact point Insulation Resistance: 1,000 megohms minimum @ 250V DC Dielectric Strength: 250V AC minimum for 1 minute minimum Mechanical Life: 10,000 detent operations minimum Electrical Life: 10,000 detent operations minimum Notes: A detent operation is one actuator position operation or stepping. A cycle is one 360° rotation. 10,000 detent operations equal 625 cycles for hexadecimal devices or 1,000 cycles for decimal devices. Nominal Operating Torque: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices Contact Timing: Shorting (Avoid possible false signal by turning off power before switching.) Materials & Finishes Actuator: Glass fiber reinforced polyamide (UL94V-0) Housing & Base: Glass fiber reinforced polyamide (UL94V-0) Leaf Spring: Stainless steel Movable Contacts: Copper alloy with gold plating Stationary Contacts: Phosphor bronze with gold plating Terminals: Phosphor bronze with gold plating Environmental Data Operating Temperature Range: –25°C through +85°C (–13°F through +185°F) Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Processing Soldering: Reflow Soldering Recommended. See Profile A in Supplement section. Note: During Reflow Soldering process, set the switch to the following position: FR02FR10P, FR02FR16P: 0 position; FR02FC10P: 7 position; FR02FC16P: F position Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 rated actuator, housing, & base UL Recognition The FR Series rotaries have not been tested for UL recognition or CSA certification. or CSA Certification: These switches are designed for use in a low-voltage, low-current circuit. When used as intended, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 02-08 10mm Ultra-Thin SMT DIP Rotaries Series FR02 TYPICAL SWITCH ORDERING EXAMPLE 10FR MOUNTING

02 SMT

(Orange Actuator) C Complement Coded (Yellow Actuator) ACTUATORS F Screwdriver Actuated Adjusted with a flat tipped screwdriver P DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FR02FR10P-S Real Coded Gull Wing Terminals for Upright Mount Screwdriver Actuated Decimal Actuator Positions Packaged in Stick-Tube PACKAGING S Stick-Tube

50 Pieces/Stick

500 Pieces/Reel

S POSITIONS

10 Decimal

16 Hexadecimal

Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors: Orange for real coded devices; Yellow for complement coded devices. TRUTH TABLES (CIRCUITS & POSITIONS) Decimal Hexadecimal 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 A B C D E F Complement Coded Model Number: FR02FC R C 10 16Actuator Position x = ON Terminal No. (Output) Terminal numbers are actually on the switch. Real Coded Model Number: FR02FR

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 02-08 10mm Ultra-Thin SMT DIP Rotaries Series FR02 Upright • Screwdriver Actuated TYPICAL SWITCH DIMENSIONS P FR02FC10P (10.5) .413 (1.0) Typ .039 (1.75) Typ .069 (2.54) Typ .100 (1.27) Typ .050 12 4 C CL 0 12 34567 89(10.0) .394 (0.2) .008 (3.8) Dia .150 (10.0) .394 0123456789ABCDEF (10.0) .394 (0.2) .008 (3.8) Dia .150 (10.0) .394 (13.0) .512 (3.9) .154 (0.2) Typ .008 (0.1) Typ .004 C 1248 (2.54) Typ .100 (0.5) Typ .020 Decimal Hexadecimal PACKAGING Each stick-tube contains 50 switches. Switches must be ordered in 50-piece increments. S Stick-Tube (16.0) .630 (16.4) .646 (540.0) 21.260 (10.5) Typ .413 (2.0) Typ .079 Overall Dia (330.0) 13.0 (6.5) R .256 Switches must be ordered in 500-piece increments. This packaging meets EIA-481-2 Standard. R Tape-Reel (24.4) .961 (80.0) Dia 3.150 (30.4) Max 1.197 3ϒ Max (0.4) .016 (10.0) .394 (4.1) .161 (4.6) .181 (2.1) Typ .083 (24.0) .945 (1.75) .069 (11.5) .453 (16.0) Typ .630 (2.0) Typ .079 (4.0) Typ .157 (1.5) Dia Typ .059 Direction of Feed 0 12 34567 (10.3) Typ .406 (1.2) Typ .047 Each tape-reel of 550 pockets contains 500 switches. Minimum Leader Length: 15.748” (400mm) Minimum Trailer Length: 6.299” (160mm)