FR01FR10PB-S NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 Distinctive Characteristics Actual Size Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Highly visible legends and choice of screwdriver, shaft or dial actuators with arrow position indication provide trouble-free code setting. Knob actuator also available. Real or complement code setting identified by color-keyed actuator. Detent mechanism gives crisp, positive action for accurate switch setting. Crimped terminals ensure secure PC mounting and prevent dislodging during soldering. Cam activated movable contact and gold contacts assure contact reliability and continuity. Surface mount model with screwdriver actuation available and shown in the surface mount section. Contact factory for custom models with .200” (5.08 mm) terminal spacing.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 General Specifications Electrical Capacity (Resistive Load) Switching Rating: 100mA @ 5V DC Nonswitching Rating: 100mA @ 50V DC Other Ratings Contact Resistance: 100 milliohms maximum for circuit; 30 milliohms maximum for contact point Insulation Resistance: 1,000 megohms minimum @ 250V DC Dielectric Strength: 250V AC minimum for 1 minute minimum Mechanical Life: 10,000 detent operations minimum Electrical Life: 10,000 detent operations minimum Notes: A detent operation is one actuator position operation or stepping. A cycle is one 360° rotation. 10,000 detent operations equal 625 cycles for hexadecimal devices or 1,000 cycles for decimal devices. Nominal Operating Torque: Metal Shaft: 0.009Nm for decimal devices; 0.01 1Nm for hexadecimal devices All other Actuator types: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices Contact Timing: Shorting (Avoid possible false signal by turning off power before switching.) Materials & Finishes Actuators: Screwdriver and Plastic Shaft - Glass fiber reinforced polyamide (UL94V-0); Dial - Polyoxymethylene; Metal Shaft - Brass with nickel plating Bushing : Brass with nickel plating (for Metal Shaft model) Outer Case: Glass fiber reinforced PBT (for Metal Shaft model) Housing & Base: Glass fiber reinforced polyamide (UL94V-0) Movable Contacts: Copper alloy with gold plating Stationary Contacts: Phosphor bronze with gold plating Terminals: Phosphor bronze with gold plating Terminal Cover: Polyamide (Right angle model only) Bracket: Phospher bronze with tin plating (for Metal Shaft model) Environmental Data Operating Temperature Range: –25°C through +85°C (–13°F through +185°F) Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Custom process sealed version available; contact factory. Standards & Certifications Flammability Standards: UL94V-0 rated actuator, housing and base UL Recognition The FR01 Series rotaries have not been tested for UL recognition or CSA certification. or CSA Certification: These switches are designed for use in a low-voltage, low-current circuit. When used as intended, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 TYPICAL SWITCH ORDERING EXAMPLE (2.1) .083 (0.8) .031(9.6) .378 F Screwdriver ACTUATION Adjusted with a flat tipped screwdriver Install knob before mounting on PCB for right angle type; it should not be removed once mounted. When mounting, align slit in knob with arrowhead on actuator. Polyamide Black knob with transparent flange AT4180 Optional Snap-on Knob Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors: Orange for real coded devices; Yellow for complement coded devices. (6.7) .264 (0.8) .031 (1.1) .043 (4.0) .157

01 Through-hole

(Orange Actuator) C Complement Coded (Yellow Actuator) Color not applicable to Actuator A POSITIONS

10 Decimal

16 Hexadecimal

K ACTUATION F Screwdriver K Plastic Shaft S Dial (for Straight Terminals only) A Metal Shaft (for Optional Knobs) S01 PACKAGING S Stick-Tubes: FR01F , FR01K, FR01S

50 Pieces/Stick

25 Pieces/Stick

DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FR01KR16P-S Hexadecimal Positions Real Coded Straight PC Terminals Plastic Shaft Packaged in Stick-Tube

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 OPTIONAL KNOBS FOR METAL SHAFT (11.0) Dia .433 (19.0) Dia .748 (9.5) .374 (13.0) .512 (0.5) .020 (16.0) Dia .630 (9.5) Dia .374 (14.3) .563 (9.5) .374 (0.5) .020 (11.0) Dia .433 (18.0) Dia .709 (9.5) .374 (15.8) .622 (0.5) .020 Polyester Base: Black Polyamide Tip Colors: A, B, C, E, F , G, H Material: Polyacetal Color: Black Polyester Base: Black Polyamide Tip Colors: A, B, C, E, F , G, H AT4103 Small Color Tipped AT4104 Large Color Tipped AT433 Plain Black A Metal Shaft Knob options illustrated below with color choices Actuators are fully rotational and operate either clockwise or counterclockwise. Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices ACTUATION K Plastic Shaft Adjusted by hand or with flat tipped screwdriver S Dial Adjusted by hand or with flat tipped screwdriver TRUTH TABLES (CIRCUITS & POSITIONS) Decimal Hexadecimal 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 A B C D E F Real Coded Model Numbers: FR01FR, FR01KR, FR01SR, FR01AR Complement Coded Model Numbers: FR01FC, FR01KC FR01SC, FR01AC R C 10 16Actuator Position x = ON Terminal No. (Output) Terminal numbers are actually on the switch. Above sequence shown for clockwise rotation. Color Codes: A Black B White C Red E Yellow F Green G Blue H Gray Mounting hardware is available if needed for models with Actuator A: Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section. Knob Orientation: When installed with shaft flat rotated 180° from bushing flat as shown in “Typical Switch Dimensions,” white line on cap points to Actuator Position 0 noted in truth tables below.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 TYPICAL SWITCH DIMENSIONS FR01FC10P FR01FR10H (7.62) .300 CL 12 48 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (1.27) .050 C (10.0) .394 (0.2) .008 (3.8) Dia .150 (10.0) .394 0 12 34567 (3.8) .150 (2.1) .083 (7.62) .300 (3.3) .130 (0.2) Typ .008 C 1248 (2.54) Typ .100 (0.5) Typ .020 (10.0) .394 (0.2) .008 (3.8) Dia .150 (10.0) .394 0123456789ABCDEF (10.0) .394 (0.2) .008 (10.0) .394 012 34 5 67 (3.8) Dia .150 (3.8) .150 (2.75) .108 (2.54) .100 (3.25) .128 (3.3) .130 (2.1) .083 (0.2) Typ .008 12 48 C (2.54) Typ .100 (0.5) Typ .020 0123456789ABCDEF (10.0) .394 (0.2) .008 (10.0) .394 (3.8) Dia .150 (2.54) .100 CL 1 248 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039(1.27) .050 C Decimal Hexadecimal Decimal Hexadecimal P Right Angle PC • ScrewdriverH Right Angle PC • Plastic Shaft Straight PC • Plastic Shaft FR01KR16P FR01KC16H (7.62) .300 CL 12 48 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (1.27) .050 C (2.54) .100 CL 1 248 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039(1.27) .050 C (10.0) .394 (0.2) .008 (10.0) .394 0 12 34567 89 (10.0) .394 (0.2) .008 (10.0) .394 0123456789ABCDEF (3.8) .150 (2.1) .083 (7.62) .300 (3.3) .130 (0.2) Typ .008 (7.0) .276 (3.8) .150 C 1248 (2.54) Typ .100 (0.5) Typ .020 012 34 5 67 (10.0) .394 (0.2) .008 (10.0) .394 0123456789ABCDEF (10.0) .394 (0.2) .008 (10.0) .394 (7.0) .276 (3.8) .150 (2.75) .108 (2.54) .100 (3.25) .128 (3.3) .130 (2.1) .083(3.8) .150 (0.2) Typ .008 12 48 C (2.54) Typ .100 (0.5) Typ .020 Decimal Hexadecimal Decimal Hexadecimal P H Straight PC • Screwdriver

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 FR01SR10P FR01AR10PB Shown in Position 0 with shaft flat rotated 180° from bushing flat TYPICAL SWITCH DIMENSIONS Straight PC • DialP Straight PC • Metal Shaft P Right Angle PC • Metal Shaft FR01AC16HB Shown in Position 0 with shaft flat rotated 180° from bushing flat H Decimal Hexadecimal (10.0) .394 (0.2) .008 (10.0) .394 1 2 3 4 5 6 7 (3.0) .118 (3.4) .134 (9.8) Dia .386 (7.2) .284 (2.1) .083 (7.62) .300 (3.3) .130 (0.2) Typ .008 (0.5) Typ .020 C 1248 (2.54) Typ .100 (7.62) .300 CL 12 48 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (1.27) .050 C (7.62) .300 12 48 C CL (1.27) .050 (12.7) .500 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (11.0) .433 (11.6) .457 (3.1) Dia .122 (13.1) .516 (7.62) .300 Flat M6 P0.75 (10.0) .394 (6.1) .240 (11.95) .470 (3.3) .130 (0.6) Typ .024 (2.28) .090 C (0.5) Typ .020 (0.4) Typ .016 (2.54) Typ .100 (12.7) .500 (0.2) Typ .008 1248 12 48 C (3.3) .130 (0.4) Typ .016 (0.5) Typ .020 (2.54) Typ .100 (12.7) .500 Flat M6 P0.75 (2.28) .090 (10.0) .394 (6.1) .240 (13.9) .547 (0.6) Typ .024 (3.03) .119 (7.62) .300 (0.2) Typ .008 (2.54) .100 (11.0) .433 (11.6) .457 (3.1) Dia .122 (13.1) .516 (5.5) .217 (7.62) .300 12 4 8 C CL (1.27) .050 (12.7) .500 (2.54) Typ .100 (0.8 ~ 1.0) Dia Typ .031 ~ .039 (2.54) .100

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 10mm DIP Rotaries Series FR01 PACKAGING FR01F with Screwdriver Actuation & Straight PC FR01F , FR01K & FR01S Each stick-tube contains 50 switches. Switches must be ordered in 50-piece increments. FR01A Each stick-tube contains 25 switches. Switches must be ordered in 25-piece increments. Note: Transport and storage temperatures should not exceed 50°C (122°F). Store stick tubes on flat surface. S Stick-Tube FR01K with Plastic Shaft & Right Angle PC (16.0) .630 (16.4) .646 (540.0) 21.260 (15.4) .606 (15.7) .618 (530.0) 20.866 FR01S with Dial Actuation & Straight PC FR01A with Metal Shaft & Straight PC FR01A with Metal Shaft & Right Angle PC (12.3) .484 (13.9) .547 (528.0) 20.787 (390.0) 15.354 (33.6) 1.323 (18.2) .717 (13.1) .516 (35.5) 1.398 (390.0) 15.354