FPSC5001U STANDEX | Alldatasheet
Document overview
- Manufacturer or author: DJones
- PDF pages: 1
Technical content
DRAWING NUMBER REV. FPSC 5001U 3 Millimeters 2 Place Dec. 1 Place Dec. When Unspecified Scale : Inches 2 Place Dec. 3 Place Dec. Fractions -+ Angles TOLERANCES DRAWING NUMBER Dwn. App'd. TITLE Standex Electronics a Standex company DATE CINCINNATI OHIO REV. This drawing and the information and technical data contained hereon, are confidential and proprietary toStandex Electronics and shall not be used in whole or in part withoutStandex written consent FPSC 5001U 4/2/2012CCR N/A 3 X/X .XXX .XX .X .XX 4/3/2012DCJ FPS-T REVISIONS INITIAL RELEASE 4/3/12 DCJ ADD INSTALLATION INSTRUCTIONS; ADD WATER LEVEL; ADD DIMENSIONS 10/25/12 DCJ ADD CUSTOM TEE FITTINGS; 3/4" PLUG WAS 1" PLUG; REMOVE BUSHING; ADD MARKING VIEWS 1/7/13 DCJ NOTES: 1. FLOAT MATERIAL: POLYPROPYLENE, WHITE 2. HOUSING AND RETAINER RING MATERIAL: POLYPROPYLE NE, BLACK 3. O-RING MATERIAL: SILICONE 4. OPERATING TEMPERATURES UP TO 70° C 5. STORAGE TEMPERATURE UP TO 105° C 6. ELECTRICAL CHARACTERISTICS: - POWER RATING (MAX) 50VA - SWITCHING VOLTAGE (MAX) 200 VDC, 150 VAC - BREAKDOWN VOLTAGE (MIN) 250VDC - CONTACT ARRANGEMENT SPST - SWICHING CURRENT (MAX) 1.5 A DC, 1.5 A AC - CARRY CURRENT (MAX) 2.5 A DC, 2.5 A AC - CONTACT RESISTANCE 100 m - INSULATION RESISTANCE (MIN) 10¹² - SWITCH AGENCY LISTED UL E122752 7. WIRE CONNECTIONS: 18AWG UL1007/1569 OR UL2468 8. FLOAT SPECIFIC GRAVITY: 0.75 (REFERENCE ONLY) 9. PLASTIC MATERIAL REGULATORY COMPLIANCE: FDA, Ro HS, UL 10. CONFORMS TO UL508 11. MUST PASS MINIMUM OF 30 LBS. WIRE PULL TEST USING DEAD WEIGHT FOR ONE MINUTE BOM FOR PACKAGE ITEM QTY. SENSOR 1 TEE, HORIZONTAL 1 TEE, VERTICAL 1 BUSHING 1 SPIGOT 1 NPT BUSHING 1 PLUG 1 WARNING LABEL 1 INSTRUCTIONS 1 * ITEMS REQUIRED FOR ASSEMBLY - PVC CEMENT - TEFLON TAPE 3/4" NPT SPIGOT 1" TO 3/4" NPT SCHEDULE 40 THREADED BUSHING SCHEDULE 40 PVC BUSHING 1" TO 3/4" FPS-T SENSOR WIRE: 6 FEET SCHEDULE 40 3/4" PLUG SCHEDULE 40 CUSTOM 1" TO 3/4" TEE HORIZONTAL IN-LINE SCHEDULE 40 CUSTOM 1" TO 3/4" TEE VERTICAL IN-LINE INSTALLATION INSTRUCTIONS * REMOVE SENSOR PRIOR TO INSTALLATION * DO NOT GLUE SENSOR TO HOUSING * PLUG DRAIN AND FILL PAN TO CONFIRM SENSOR FUNCTION AFTER INSTALLATION * REMOVE SENSOR TO CLEAN & INSPECT .09" ±.10 WATER LEVEL @ SENSOR ACTIVATION PIPE CENTERLINE 1.68" 2.50" 3.35" 1.06" 2.18" VERTICAL INSTALLATION HORIZONTAL INSTALLATION VERTICAL TEE MARKING HORIZONTAL TEE MARKING