FPP MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: FPP FPP SPECIFICATIONS ES-1461 Rev.10 Page 1/4 http://www.m-system.co.jp/ Space-saving Plug-in Signal Conditioners F-UNIT PULSE ISOLATOR Functions & Features

  • Galvanically isolating pulse rate signals
  • Input frequency = output frequency
  • Various outputs (open collector, voltage pulses and photo MOSFET relay pulse)
  • High-density mounting Typical Applications
  • Isolating field pulse signals in order to reduce noises
  • Changing e.g. dry contact signal to e.g. 5 V signals 26 (1.02) 100 (3.94) mm (inch) 137 (5.39) MODEL: FPP–[1][2]–[3][4]

ORDERING INFORMATION

  • Code number: FPP-[1][2]-[3][4] Specify a code from below for each of [1] through [4]. (e.g. FPP-33-K/Q)
  • Frequency range (e.g. 0 – 1000 Hz)
  • Specify the specification for option code /Q (e.g. /C01/S01) [1] INPUT 1: Mechanical contact (max. 30 Hz) 2: Open collector (max. 10 kHz) 3: Voltage pulse (max. 10 kHz) [2] OUTPUT 1: Low frequency open collector (max. 30 Hz) 2: High frequency open collector (max. 10 kHz) 3: 5 V pulse (max. 10 kHz) 4: 12 V pulse (max. 10 kHz) 5: 24 V pulse (max. 10 kHz) 8: Photo MOSFET relay pulse (max. 30 Hz) [3] POWER INPUT AC Power K: 85 – 132 V AC (Operational voltage range 85 – 132 V, 47 – 66 Hz) L: 170 – 264 V AC (Operational voltage range 170 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Frequency range: Input and output are the same. Chattering protection: Filter provided for mechanical contact input INPUT SPECIFICATIONS Excitation: 12V DC ±2 V @ 30 mA; shortcircuit protection ■ Open Collector Maximum frequency: 10 kHz Pulse width time requirement: 10 μsec. min. for ON and OFF Sensing: Approx. 12 V DC @3 mA ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF ■ Mechanical Contact Maximum frequency: 30 Hz Pulse width time requirement: 10 msec. min. for ON and OFF Sensing: Approx. 12 V DC @3 mA ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF ■ Voltage Pulse Maximum frequency: 10 kHz

MODEL: FPP FPP SPECIFICATIONS ES-1461 Rev.10 Page 2/4 http://www.m-system.co.jp/ Pulse width time requirement: 10 μsec. min. for high and low levels Waveforms: Square or sine Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level Input impedance: 10 kΩ min. OUTPUT SPECIFICATIONS ■ Low Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 30 Hz Timer: Limits ON time within 75 ±25 msec. for wider than 75 msec. pulses Saturation voltage: 0.5 V DC ■ High Frequency Open Collector Maximum frequency: 10 kHz Saturation voltage: 0.5 V DC ■ Voltage Pulse Maximum frequency: 10 kHz High level: Rating (5, 12 or 24 V) ±10 % Low level: ≤ 0.5V Load resistance: ≥ 250 Ω for 5 V ≥ 600 Ω for 12 V ≥ 1200 Ω for 24 V ■ Photo MOSFET Relay Pulse Maximum frequency: 30 Hz Timer: Limits ON time within 75 ±25 msec. for wider than 75 msec. pulses Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω INSTALLATION Power input

  • AC: Approx. 4.5 VA
  • DC: 24 V approx. 70 mA 110 V approx. 20 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail; Standard Rack Mounting Frame BX-16H available Weight: 180 g (0.40 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

1500 V AC @ 1 minute (I/O to power)

MODEL: FPP FPP SPECIFICATIONS ES-1461 Rev.10 Page 3/4 http://www.m-system.co.jp/ OUTPUT LOGIC HH H L OFF ON OFF OFF ON ON LL INPUT TYPE Voltage Pulse Mechanical Contact Open Collector INPUT VOLTAGE PULSE OUTPUT OPEN COLLECTOR or PHOTO MOSFET RELAY PULSE OUTPUT EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 4 26 (1.02) 93 (3.66) (.59) 2–4.5 (.18) HOLE 15 (.59) deep 8–M3.5 SCREW 7.8 (.31) 107 (4.21) DIN RAIL 35mm wide [3.3 (.13)] CLAMP (top & bottom) 137 (5.39)

  • When mounting, no extra space is needed between units. 26 (1.02) 100 (3.94) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM LOAD Relay or Counter Coil Spark Quenching Diode LOAD Relay or Counter Coil Varistor or Spark Quenching Circuit U Isolation Base Socket Waveform Shaper Output Driver OUTPUT U(+) V(–) POWER 12V Supply INPUT SENSOR EXCITATION Timer * Timer is provided for low frequency open collector or photo MOSFET relay pulse output. 4kΩ ■ Mechanical Contact or Open Collector Input Connection Examples +12V ■ Voltage Pulse +12V ■ Open Collector Output Connection Examples ■ Voltage Pulse PWR PWR + 3 + 3 ■ Photo MOSFET Relay Pulse
  • AC Powered
  • DC Powered

MODEL: FPP FPP SPECIFICATIONS ES-1461 Rev.10 Page 4/4 http://www.m-system.co.jp/ Specifications are subject to change without notice.