FPM400 FRANMAR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
300/400 Watts Single Output AC-DC U-bracket Type Medical Power F P M 4 0 0 ◆ 100-240 VAC input with active PFC ◆ Operation altitude up to 5000meters ◆ -Inhibit TTL low to disable output ◆ Power Factor 0.98 typical ◆ Less than 300uA leakage current ◆ Meet EN55011/55022 class B emissions Standard PS Off and DC OK signals)◆ ◆ BF Class insulation Derate from 100% at +50 linearly to 50% at +70℃℃ www.franmar.com.tw All specifications are typical at nominal line, full load and 25 ℃; unless otherwise noted. NOTES: 1. Dimensions shown in inches [mm] ; Tolerance 0.02 [0.5] maximum 2. Input connector P1 is Dinkle terminal P N DT-35-B01W-03 with nickel plated M screws/, 3 . 3. P2, P3: M4 x 0 7 screw connectors. 4. Connector P4: Molex header 87833-08 or equivalent, mating with Molex housing 51110-0850 or equivalent. 5. Fan connector P5: JST header S2B-ZR or equivalent mating with JST housing ZHR-2 or equivalent-3.4 , . .7. Maximum penetration depth of fixing screws is 4 mm from the outer surface of chassis Model Number Output Voltage Output Current Output Max. Watts FPM400-S120-z 0.1A 300W/400W FPM400-S150-z 12VDC 0.1A 300W/400W FPM400-S180-z 15VDC 0.1A 300W/400W FPM400-S240-z 18VDC 0.1A 300W/400W FPM400-S280-z 24VDC 0.1A 300W/400W28VDC FPM400-S360-z 36VDC 0.1A 300W/400W 90/92% 90/92% 91/92% 89/91% 89/91% 90/92% EFF. 115V/230Vmin. 25.0A 20.0A 16.67A 12.5A 10.72A 8.34A convection 7CFM 33.34A 26.67A 22.23A 16.67A 14.29A 11.12A Notes: 1. z = U for U-Backet ; z = E for Enclosed 2. 300 W without moving air or 400 W with 7 CFM forced air provided by user for “U” version 400W for, “E” version with cover and fan assembly 3. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHZ bandwidth, at rated line voltage and output load ranges, and with a 10 uF tantalum capacitor in parallel with a 0.1 uF ceramic capacitor across the output. 4. All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the burst-mode operation of the control IC in them for energy saving. FPM400-S480-z 48VDC 0.1A 300W/400W 90/93%6.25A 8.34A C US Your Smart Choice in Power Quality Products , Fast response , Low cost