FPM110 FRANMAR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Max. Output Power 72~110 Watts Single/Dual/Triple/Quad Output Open Frame Type for Medical F P M 1 1 0 ◆◆ ◆ ◆ ◆ ,Small size light weigh Meet EN55011 & FCC Class B OVP & OCP protection Input surge current protection Low safety ground leakage curre nt All Specifications are Typical at Nominal Line, full Load and 25 Unless Otherwise Noted.℃. Earth leakage/Touch current ………………..…………. 220uA/100uA max. @ 264VAC/63Hz (℃ )derated linearly from 100% load @ 50 to 50% load @ 70℃ The output #1 of model FPM110-Q045-1A needs a minimum current of 2A to support the other outputs at their maximum rated load.* * 110 watts maximum at 25 CFM forced air cooling or 80 watts maximum at convection cooling, except model FPM110-S033 which is rated a t 60 watts maximum at convection cooling or 72 watts maximum at 25 CFM forced air cooling. * Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 watts. All models may be operated at no load At no load output voltage tolerance increases to 10%.* -. -, ± Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges and with a 10 F tantalum* , μ capacitor in parallel with a 0.1 F ceramic capacitor across the output.μ FPM110-S033 60W/72W FPM110-S050 80W/110W FPM110-S120 80W/110W FPM110-S150 80W/110W FPM110-S240 80W/110W OUTPUT CONNECTOR PIN CHART Connector: P1: Molex header 09-65-2058 or equivalent, mating with Molex housing 09-50-1051 or equivalent. P2 mates with Molex 09-50-3131 or equivalent. Note 1. The copper pad of the mounting hole near P1 is for system grounding through a metallic stand off- to system chassis. 2. Dimensions in inches(mm) 3. Tolerance: 0.02 [0.5] max. 4. 1.Weight 640 grams (1.408 lbs：. ) 4,5 8,9 6,7 +V1 +V1 1,2,3 PIN NO SINGLE TRIPLEDUAL FPM110-S300 V1 Imax Tol. Output #1 Output #2 Output #3 Imin V3 Imax Tol. IminV2 Imax Tol.Imin 3.3V 0A 22.0A ±3% 5.0V 0A 22.0A ±3% 12V 0A 9.0A ±2% 15V 0A 7.5A ±2% 24V 0A 4.5A ±2% 30V 0A 3.6A ±3% 80W/110W
10 PFDPFD
N.C. N.C. 60-80 watts at convection cooling Output #4 V3 Imax Tol.Imin FPM110-D023 80W/110W FPM110-T031 80W/110W FPM110-T032 80W/110W FPM110-Q040 80W/110W FPM110-Q041 80W/110W FPM110-Q042 +5.1V 0A 10.0A ±3% +15V 0A 4.0A ±3% -15V 0A 1A ±4% +5.1V 0A 10.0A ±3% +12V 0A 5.0A ±3% -12V 0A 1A ±4% +5.1V 0A 10.0A ±3% +15V 0A 4.0A ±3% -15V 0A 1A ±4% +5.1V 0A 10.0A ±3% +12V 0A 5.0A ±3% -12V 0A 1A ±4% 80W/110W -5V 0.0A 1.0A ±4% +24V 0.0A 1.0A ±4% +12V 0.0A 1.0A ±4% FPM110-Q045 80W/110W FPM110-Q045-1 80W/110W FPM110-Q045-2 80W/110W FPM110-Q046 +5.1V 0A 10.0A ±3% +12V 0A 5.0A ±3% -12V 0A 1A ±4% +5.1V 2A 10.0A ±3% +12V 0A 5.0A ±3% -12V 0A 1A ±4% +5.1V 0A 10.0A ±3% +24V 0A 3.0A ±3% -12V 0A 1A ±4% +5.1V 0A 10.0A ±3% +15V 0A 4.0A ±3% -15V 0A 1A ±4% 80W/110W +24V 0.0A 1.0A ±4% +24V 1.5A 3.0A ±4% -12V 0.0A 1.0A ±4% -5V 0.0A 1.0A ±4% -12V 0A 1A ±4% Ipeak 9.0A 9.0A 7.5A 9.0A 7.5A 9.0A 9.0A 9.0A 5.0A 7.5A
12 KEYKEY
N.C. N.C. QUAD PFDPFD V3 V3 KEYKEY N.C. V4 V1 return Common Return Common Return Common Return V1 return Common Return Common Return Common Return C US Your Smart Choice in Power Quality Products , Fast response , Low cost