FPF2214

FPF2213 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semico nductor Components Industries, LLC dba ON Semiconductor or its subsid iaries in the United States and/or other countries. ON Semiconductor ow ns the rights to a number to make changes without further notice to any products herein. ON Semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does ON Semico nductor assume any liability arising out of the application or use of any product or circuit, and specifica lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. Buyer is responsible for i ts products and applications using ON Semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by ON Semiconductor. “Typica l” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in diffe rent applications and actual performance may vary over time. All operat ing parameters, including “Typicals” must be validated for each custo mer application by customer’s technical experts. ON Semiconductor does not convey any license und er its patent rights nor the rights of others. ON Semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classifica tion in a foreign jurisdiction or any devices intended for implantation i n the human body. Should Buyer purchase or use ON Semiconductor products fo r any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semico nductor and its officers, employees, subsidiaries, affiliates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at ON Semiconductor was negligent regarding the design or manufacture o f the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literatu re is subject to all applicable copyright laws and is not for resale in any manne r.

©2008 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com February 2009 FPF2213-FPF2215 Rev. C FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit

Features

1.8 to 5.5V Input Voltage Range Typical RDS(ON) = 250m @ VIN = 5.5V Typical RDS(ON) = 275m @ VIN = 3.3V 100-250mA (min) Adjustable Current Limit 5% Current Limit Tolerance @ 250mA (min) 72 (typ) Output Discharge Resistance ESD Protected, Above 8000V HBM and 2000V CDM

Applications

The FPF2213-FPF2215 are low R DS(ON) P-Channel MOSFET load switches with high precision current limit val ue. The input voltage range operates from 1.8V to 5.5V to fulfill today's Ultra Portable Device's supply requirement. Switch contro l is by a logic input (ON) capable of interfacing directly wi th low voltage control signal. On-chip pull-down is available for output quick discharge when switch is turned off. For the FPF2214, if the constant current condition still persists after 30ms, these parts will shut off the switch an d pull the fault signal pin (FLAGB) low. The FPF2213 has an auto-res tart feature, which will turn the switch on again after 450mS if the ON pin is still active. The FPF2214 do not have thi s auto-restart feature so the switch will remain off until the ON pin is cycled. For the FPF2215, a current limit condition will imm ediately pull the fault signal pin low and the part will remain i n the constant- current mode until the switch current falls below t he current limit. For the FPF2213 through FPF2215, the current limit is set by an external resistor and the minimum current lim it is 100mA.

Ordering Information

(mA) Current Limit Blanking Time (mS) Auto-Restart Time (mS) ON Pin Activity FPF2213 100-250 30 450 Active HI FPF2214 100-250 30 NA Active HI FPF2215 100-250 NA NA Active HI BOTTOM TOP Pin 1

2 www.fairchildsemi.com FPF2213-FPF2215 Rev. C FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit Typical Application Circuit Functional Block Diagram OFF ON ON VIN GND FPF2213/4/5 ISET VOUT TO LOAD FLAGB UVLO THERMAL SHUTDOWN CURRENT LIMIT CONTROL LOGIC VIN ON ISET FLAGB GND VOUT Output Discharge

3 www.fairchildsemi.com FPF2213-FPF2215 Rev. C FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit Pin Configuration Pin Description Absolute Maximum Ratings Recommended Operating Range

Electrical Characteristics

1 I SET Current Limit Set Input : A resistor from I SET to ground sets the current limit for the switch

2 V IN Supply Input: Input to the power switch and the sup ply voltage for the IC

3 V OUT Switch Output: Output of the power switch

4 FLAGB Fault Output: Active LO, open drain output which in dicates an over current, supply

under voltage or over temperature state

5 GND Ground

6 ON ON/OFF Control Input

Parameter Min. Max. Unit VIN, VOUT, ON, FLAGB TO GND -0.3 6 V ISET TO GND -0.3 0.3 V Power Dissipation @ TA = 25° C 1.2 W Operating and Storage Junction Temperature -65 125 ° C Thermal Resistance, Junction to Ambient 86 ° C/W Electrostatic Discharge Protection HBM 8000 V MM 400 V CDM 2000 V Parameter Min. Max. Unit VIN 1.8 5.5 V Ambient Operating Temperature, TA -40 85 ° C Parameter Symbol Conditions Min. Typ. Max. Units Basic Operation Operating Voltage V IN 1.8 5.5 V Quiescent Current I Q IOUT=0mA, VIN= VON=1.8V, RSET=26.8K 45 75 AIOUT=0mA, VIN= VON=3.3V, RSET=26.8K 50 85 IOUT=0mA, VIN= VON=5.5V, RSET=26.8K 60 95 VIN Shutdown Current V ON=0V, VIN=5.5V, VOUT=short to GND 2.5 A FLAGB GND ISET1 VIN VOUT ON MicroFET 2x2 6L (BOTTOMVIEW)

4 www.fairchildsemi.com FPF2213-FPF2215 Rev. C FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit VOUT Shutdown Current V ON=0V, VOUT=5.5V, VIN=short to GND 1 A On-Resistance R ON VIN=5.5V, IOUT=200mA, TA=25° C 250 325 m VIN=3.3V, IOUT=200mA, TA=25° C 275 360 VIN=1.8V, IOUT=200mA, TA=25° C 350 455 VIN=3.3V, IOUT=200mA, TA=-40 to +80° C 135 450 Output Discharge Resistance V IN=3.3V, VON=0V, IOUT=10mA 72 105 ON Input Logic High Voltage (ON) V IH VIN=1.8V 0.8 V VIN=5.5V 1.4 ON Input Logic Low Voltage (OFF) V IL VIN=1.8V 0.5 V VIN=5.5V 1.0 On Input Leakage V ON = VIN or GND -1 1 A FLAGB Output Logic Low Voltage VIN=5.5V, ISINK=100A 0.05 0.1 V VIN=1.8V, ISINK=100A 0.12 0.25 FLAGB Output High Leakage Current V IN=5.5V, Switch on 1 A Protections Current Limit I LIM VIN=3.3V, VOUT = 3.0V, RSET=26.8K, TA=25° C 250 263 276 mA Thermal Shutdown Shutdown Threshold 140 ° CReturn from Shutdown 130 Hysteresis 10 Under Voltage Shutdown UVLO V IN increasing 1.55 1.65 1.75 V Under Voltage Shutdown Hysteresis 50 mV Dynamic Turn On Time t ON RL=500, CL=0.001uF 70 S Turn Off Time t OFF RL=500, CL=0.001uF 600 nS VOUT Rise Time t RISE RL=500, CL=0.001uF 40 S VOUT Fall Time t FALL RL=500, CL=0.001uF 100 nS Over Current Blanking Time t BLANK FPF2213, FPF2214 15 30 60 mS Auto-Restart Time t RSTRT FPF2213 225 450 900 mS Current Limit Response Time VIN = VON = 3.3V. Over-Current Condition: RLOAD=VIN/(ILIMx4) 5 S Parameter Symbol Conditions Min. Typ. Max. Units

9 www.fairchildsemi.com FPF2213-FPF2215 Rev. C FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit Description of Operation The FPF2213, FPF2214, and FPF2215 are state of the art Adjustable High Precision Current Limit switches th at protect systems and loads which can be damaged or disrupted by the application of high currents. The core of each devi ce is a 0.27 P-channel MOSFET and a controller capable of functioning over an input operating range of 1.8V - 5.5V. The contro ller protects offers current limiting, UVLO(undervoltage lockout) and thermal shutdown protection. The current limit is adjustabl e from 100mA to 250mA through the selection of an external resis tor. On/Off Control The ON pin is active high, and controls the state o f the switch. Applying a continuous high signal will hold the swi tch in the on state. The switch will move into the OFF state when the active high is removed, or if a fault is encountered. For all versions, an undervoltage on VIN or a junction temperature in ex cess of 140° C overrides the ON control to turn off the switch. In addition, excessive currents will cause the switch to turn off in the FPF2213 and FPF2214. The FPF2213 has an Auto-Re start feature which will automatically turn the switch on again after 450ms. For the FPF2214, the ON pin must be toggled to turn-on the switch again. The FPF2215 does not turn off in response to an over current condition but instead remains opera ting in a constant current mode so long as ON is active and t he thermal shutdown or UVLO have not activated. Fault Reporting Upon the detection of an over-current condition, an input UVLO, or an over-temperature condition, the FLAGB signals the fault mode by activating LO. In the event of an over-curr ent condition for the FPF2213 and FPF2214, the FLAGB goes LO at t he end of the blanking time while FLAGB goes LO immediatel y for the FPF2215. If the over-current condition lasts longer than blanking time, FLAGB remains LO through the Auto-Re start Time for the FPF2213 while for the FPF2214, FLAGB i s latched LO and ON must be toggled to release it. With the F PF2215, FLAGB is LO during the faults and immediately retur ns HI at the end of the fault condition. FLAGB is an open-drain MOSFET which requires a pull-up resistor between VIN and F LAGB. During shutdown, the pull-down on FLAGB is disabled to reduce current draw from the supply. A 100K pull up resistor is recommended to be used in the application. Current Limiting The current limit ensures that the current through the switch doesn't exceed a maximum value while not limiting a t less than a minimum value. The current at which the parts wil l limit is adjustable through the selection of an external res istor connected to the ISET pin. Information for selectin g the resistor is found in the Application Information section of this datasheet. The FPF2213 and FPF2214 have a blanking time of 30m s (nominal) during which the switch will act as a con stant current source. At the end of the blanking time, the switch will be turned-off. The FPF2215 has no current limit blanki ng period so it will remain in a constant current state until th e ON pin is deactivated or the thermal shutdown turns-off the s witch. Undervoltage Lockout (UVLO) The undervoltage lockout turns-off the switch if the input voltage drops below the undervoltage lockout threshold. Wit h the ON pin active the input voltage rising above the under voltage lockout threshold will cause a controlled turn-on o f the switch which limits current over-shoots. Output Discharge Resistor The FPF2213/4/5 family contains an 80 on-chip load resistor for quick output discharge when the switch is turne d off. This features become more attractive when application re quires large output capacitor to be discharge when the swi tch tunrs off. However, V OUT pin should not be connected directly to the battery source due to the discharge mechanism of th e load switch. Thermal Shutdown The thermal shutdown protects the die from internal ly or externally generated excessive temperatures. During an over- temperature condition the FLAGB is activated and th e switch is turned-off. The switch automatically turns-on again if temperature of the die drops below the threshold te mperature.

10 www.fairchildsemi.com FPF2213-FPF2215 Rev. C FPF2213-FPF2215 Integrated Load Switch with Adjustable High Precision Current Limit

Application Information

The FPF2213, FPF2214, and FPF2215 have adjustable h igh precision current limit which is set with an extern al resistor connected between ISET and GND. Please see the layo ut recommendation section of the application note for the recommended RSET layout. The R SET resistance is selected by using the following equation: For a particular I LIM(min) value, R SET can be calculated from below formula: FPF221X family has 5% precision at higher load curr ent. The I LIM (Max) and tolerance of current limit value can be determ ined using Figure 21 (ILIM vs RSET ) and the following formula: The table and figure below can be used to select R SET: Input Capacitor To limit the voltage drop on the input supply caused by transient in-rush currents when the switch is turned on into a discharged load capacitor or a short-circuit, a capacitor is r ecommended to be placed between VIN and GND. A 1uF ceramic capacitor, CIN, placed close to the pins is usually sufficient. Hig her values of CIN can be used to further reduce the voltage drop. Output Capacitor A 0.1uF capacitor C OUT, should be placed between V OUT and GND. This capacitor will prevent parasitic board in ductances from forcing VOUT below GND when the switch turns-off. For the FPF2213 and FPF2214, the total output capacitance n eeds to be kept below a maximum value, C OUT(max), to prevent the part from registering an over-current condition and turning-off the switch. The maximum output capacitance can be determined from the following formula: Power Dissipation During normal on-state operation, the power dissipa ted in the device will depend upon the level at which the curr ent limit is set. The maximum allowed setting for the current li mit is 250mA and will result in a power dissipation of: If the part goes into current limit, maximum power dissipation will occur when the output is shorted to ground. Fo r the FPF2213, the power dissipation will be scaled by th e Auto- Restart Time, t RSTRT, and the Over Current Blanking Time, tBLANK. Therefore, the maximum power dissipated is: RSET [k] Min. Current Limit [mA] Typ. Current Limit [mA] Max. Current Limit [mA] Tol [%] 26.8 250 263 276 5.0 28.0 238 252 265 5.4 29.4 226 240 253 5.7 30.0 221 235 249 5.8 32.4 204 218 232 6.4 36.5 179 193 208 7.5 40.2 160 175 190 8.5 48.7 129 145 161 11.1 60.0 100 118 135 15.0 ILIM (Typ) (mA) = 7050 RSET (K) RSET(K) = 7050 ILIM (Min) (mA) + 10 + 750 ILIM (Min) (mA) Tolerance (%) = 100 * ILIM (Typ) - ILIM (Min) ILIM (Typ) ILIM (Max) = ILIM (Typ) + ILIM (Typ) * Tolerance (%) 100 Table 1: RSET Selection Guide Figure 21. ILIM vs RSET

0.05 C 0.05 C 2.0 2.0 PIN#1 IDENT A B SIDE VIEW RECOMMENDED LAND PATTERN BOTTOM VIEW SEATING PLANE 1 3 PIN #1 IDENT 0.65 1.30 1.21 0.52(6X) 0.90 0.42(6X)0.65 2.25 1.68 (0.40) (0.70) NOTES: A. PACKAGE DOES NOT FULLY CONFORM TO JEDEC MO-229 REGISTRATION B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 2009. D. LAND PATTERN RECOMMENDATION IS EXISTING INDUSTRY LAND PATTERN. E. DRAWING FILENAME: MKT-MLP06Krev5. (0.20)4X

0.10 C A B

0.05 C “ (6X) (6X) (0.60) 0.08 C

0.10 C “

“ C 1.72 0.15

www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative  Semiconductor Components Industries, LLC