FPC5-AH FOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

© 2006 FOX ELECTRONICS | ISO9001:2000 Certified

FEATURES

  • 5.0V Operation
  • HCMOS Output
  • 50.8 x 50.8 x 20.5mm
  • SC Cut Resonators All specifications subject to change without notice. *Specifications are applicable to 10 MHz units. Performance at other frequencies will vary from these values. Other frequencies and performance is available. Contact Fox Custom Products Center (CPC) for details at 877-369-8041 or email at http://www.foxonline.com/email.htm 5.000 ~ 50.000 MHz* +5 VDC ± 5%

3 Watts

1 Watt Typical

±0.5 PPB ± 0.5 PPB / Day ± 50 PPB / Year 10-11 / Sec (Typical @ 10 MHz) -120 dBc -140 dBc -155 dBc -158 dBc 3 minutes ± 0.5 PPM Min. Positive ± 10% > 100 K HCMOS 10% Vdd 90% Vdd Min 5 nS 5 nS 50% ± 5% Coldweld, SC Cut PARAMETERS Frequency Range (Fo) Supply V oltage Power (Warm-Up for 3 minutes) Power Stabilized at +25ºC (Still air) V oltage (± 5% Change) Short Term Aging (3 weeks min operation) Long Term Aging (After 60 days operation) Allan Variance (1 sec samples) Phase Noise (Offset) 10 Hz 100 Hz

1 KHz

10 KHz

Warm-Up to within ± 100 PPB (Referenced to freq after 1/2 hour power on) Frequency Adjust (0 to +5 VDC) Slope Non-Linearity (0.8V-5.0V) Input Impedance Output (@ 10 MHz) (Vol) (Voh) Rise Time (10% ~ 90% Vdd) (Tr) Fall Time (90% ~ 10% Vdd) (Tf) Duty Cycle @ 50% Vdd Resonator Type

  • ELECTRICAL CHARACTERISTICS MAX (unless otherwise noted) Pin Connections #1) Trim #2) N.C or trim reference Voltage #3) Output #4) GND / Case #5) VDD "Pin numbers are for reference only" Frequency Stability vs. Temp ±2 PPB ±5 PPB ±10 PPB Operating Temperature 0 ~ +50 ºC -20 ~ +70 ºC -40 ~ +75 ºC *Frequency Range (MHz) 5.000 ~ 50.000 5.000 ~ 50.000 5.000 ~ 50.000 FPC501AH FPC502AH FPC503AH Model Number
  • PART NUMBER SELECTIONLearn More - Internet Required Part Number 687-Frequency-xxxxx 688-Frequency-xxxxx 689-Frequency-xxxxx Unless otherwise specified, tolerances are ±0.26 All dimensions are in millimeters. Case Material: Steel Plating: Nickel 50.8mm x 50.8mm Precision OCXO Rev. 11/10/2006Preliminary http://www.foxonline.com/need_a_sample.htm Model: FPC5_ _AH Series Page 1 of 1