FP75R12N3T7 INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 21
Technical content
Features
- Electrical features - V CES = 1200 V - I C nom = 75 A / ICRM = 150 A - TRENCHSTOP TM IGBT7 - Overload operation up to 175°C - Low V CE,sat
- Mechanical features - High power and thermal cycling capability - Integrated NTC temperature sensor - Copper base plate - Solder contact technology - Standard housing - Al 2O3 substrate with low thermal resistance Potential applications
- Auxiliary inverters
- Motor drives
- Servo drives Product validation
- Qualified for industrial applications according to the relevant tests of IEC 60747, 60749 and 60068
Description
J FP75R12N3T7 EconoPIM™3 module Datasheet Please read the sections "Important notice" and "Warnings" at the end of this document Revision 0.20 www.infineon.com 2022-03-02
EconoPIM™3 module Table of contents Datasheet 2 Revision 0.20 2022-03-02
1 Package
Table 1 Insulation coordination Parameter Symbol Note or test condition Values Unit Isolation test voltage VISOL RMS, f = 50 Hz, t = 1 min 2.5 kV Material of module baseplate Cu Internal isolation basic insulation (class 1, IEC 61140) Al2O3 Creepage distance dCreep terminal to heatsink 10.0 mm Clearance dClear terminal to heatsink 7.5 mm Comparative tracking index CTI >200 Relative thermal index (electrical) RTI housing 140 °C Table 2 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Stray inductance module LsCE 35 nH Module lead resistance, terminals - chip RAA'+CC' TC=25°C, per switch 2.9 mΩ Module lead resistance, terminals - chip RCC'+EE' TC=25°C, per switch 3.9 mΩ Storage temperature Tstg -40 125 °C Mounting torque for module mounting M - Mounting according to valid application note M5, Screw 3 6 Nm Weight G 300 g Note: The current under continuous operation is limited to 50A rms per connector pin.
2 IGBT , Inverter
Table 3 Maximum rated values Parameter Symbol Note or test condition Values Unit Collector-emitter voltage VCES Tvj = 25 °C 1200 V Continuous DC collector current ICDC Tvj max = 175 °C TC = 100 °C 75 A Repetitive peak collector current ICRM tp limited by Tvj op 150 A Gate-emitter peak voltage VGES ±20 V FP75R12N3T7 EconoPIM™3 module Datasheet 3 Revision 0.20 2022-03-02
Table 4 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Collector-emitter saturation voltage VCE sat IC = 75 A, VGE = 15 V Tvj = 25 °C 1.55 1.80 V Tvj = 125 °C 1.69 Tvj = 175 °C 1.77 Gate threshold voltage VGEth IC = 1.7 mA, VCE = VGE, Tvj = 25 °C 5.15 5.80 6.45 V Gate charge QG VGE = ±15 V, VCE = 600 V 1.25 µC Internal gate resistor RGint Tvj = 25 °C 2 Ω Input capacitance Cies f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 15.1 nF Reverse transfer capacitance Cres f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 0.053 nF Collector-emitter cut-off current ICES VCE = 1200 V, VGE = 0 V Tvj = 25 °C 0.013 mA Gate-emitter leakage current IGES VCE = 0 V, VGE = 20 V, Tvj = 25 °C 100 nA Turn-on delay time (inductive load) tdon IC = 75 A, VCE = 600 V, VGE = ±15 V, RGon = 5.6 Ω Tvj = 25 °C 0.145 µs Tvj = 125 °C 0.157 Tvj = 175 °C 0.167 Rise time (inductive load) tr IC = 75 A, VCE = 600 V, VGE = ±15 V, RGon = 5.6 Ω Tvj = 25 °C 0.060 µs Tvj = 125 °C 0.064 Tvj = 175 °C 0.066 Turn-off delay time (inductive load) tdoff IC = 75 A, VCE = 600 V, VGE = ±15 V, RGoff = 5.6 Ω Tvj = 25 °C 0.289 µs Tvj = 125 °C 0.372 Tvj = 175 °C 0.424 Fall time (inductive load) tf IC = 75 A, VCE = 600 V, VGE = ±15 V, RGoff = 5.6 Ω Tvj = 25 °C 0.112 µs Tvj = 125 °C 0.216 Tvj = 175 °C 0.281 Turn-on energy loss per pulse Eon IC = 75 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGon = 5.6 Ω, di/dt = 910 A/µs (Tvj = 175 °C) Tvj = 25 °C 9.09 mJ Tvj = 125 °C 11.8 Tvj = 175 °C 13.4 Turn-off energy loss per pulse Eoff IC = 75 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGoff = 5.6 Ω, dv/dt =
3200 V/µs (Tvj = 175 °C)
Tvj = 25 °C 5 mJ Tvj = 125 °C 8.09 Tvj = 175 °C 9.74 (table continues...) FP75R12N3T7 EconoPIM™3 module Datasheet 4 Revision 0.20 2022-03-02
Table 4 (continued) Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. SC data ISC VGE ≤ 15 V, VCC = 800 V, VCEmax=VCES-LsCE*di/dt tP ≤ 8 µs, Tvj = 150 °C 260 A tP ≤ 7 µs, Tvj = 175 °C 250 Thermal resistance, junction to case RthJC per IGBT 0.486 K/W Thermal resistance, case to heat sink RthCH per IGBT , λgrease= 1 W/(m*K) 0.0706 K/W Temperature under switching conditions Tvj op -40 175 °C Note: T vj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14.
3 Diode, Inverter
Table 5 Maximum rated values Parameter Symbol Note or test condition Values Unit Repetitive peak reverse voltage VRRM Tvj = 25 °C 1200 V Continuous DC forward current IF 75 A Repetitive peak forward current IFRM tP = 1 ms 150 A I2t - value I2t tP = 10 ms, VR = 0 V Tvj = 125 °C 820 A²s Tvj = 175 °C 630 Table 6 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Forward voltage VF IF = 75 A, VGE = 0 V Tvj = 25 °C 1.72 2.10 V Tvj = 125 °C 1.59 Tvj = 175 °C 1.52 Peak reverse recovery current IRM VR = 600 V, IF = 75 A, VGE = -15 V, -diF/dt = 910 A/µs (Tvj = 175 °C) Tvj = 25 °C 32 A Tvj = 125 °C 43 Tvj = 175 °C 50 (table continues...) FP75R12N3T7 EconoPIM™3 module Datasheet 5 Revision 0.20 2022-03-02
Table 6 (continued) Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Recovered charge Qr VR = 600 V, IF = 75 A, VGE = -15 V, -diF/dt = 910 A/µs (Tvj = 175 °C) Tvj = 25 °C 4.82 µC Tvj = 125 °C 10.2 Tvj = 175 °C 13.7 Reverse recovery energy Erec VR = 600 V, IF = 75 A, VGE = -15 V, -diF/dt = 910 A/µs (Tvj = 175 °C) Tvj = 25 °C 1.32 mJ Tvj = 125 °C 3.09 Tvj = 175 °C 4.36 Thermal resistance, junction to case RthJC per diode 0.728 K/W Thermal resistance, case to heat sink RthCH per diode, λgrease= 1 W/(m*K) 0.0871 K/W Temperature under switching conditions Tvj op -40 175 °C Note: T vj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14.
4 Diode, Rectifier
Table 7 Maximum rated values Parameter Symbol Note or test condition Values Unit Repetitive peak reverse voltage VRRM Tvj = 25 °C 1600 V Maximum RMS forward current per chip IFRMSM TC = 100 °C 95 A Maximum RMS current at rectifier output IRMSM TC = 100 °C 150 A Surge forward current IFSM tP = 10 ms Tvj = 25 °C 720 A Tvj = 150 °C 565 I2t - value I2t tP = 10 ms Tvj = 25 °C 2590 A²s Tvj = 150 °C 1600 Table 8 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Forward voltage VF IF = 75 A Tvj = 150 °C 1.00 V Reverse current Ir Tvj = 150 °C, VR = 1600 V 1 mA (table continues...) FP75R12N3T7 EconoPIM™3 module Datasheet 6 Revision 0.20 2022-03-02
Table 8 (continued) Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Thermal resistance, junction to case RthJC per diode 0.602 K/W Thermal resistance, case to heat sink RthCH per diode, λgrease= 1 W/(m*K) 0.0770 K/W Temperature under switching conditions Tvj, op -40 150 °C
5 IGBT , Brake-Chopper
Table 9 Maximum rated values Parameter Symbol Note or test condition Values Unit Collector-emitter voltage VCES Tvj = 25 °C 1200 V Continuous DC collector current ICDC Tvj max = 175 °C TC = 110 °C 50 A Repetitive peak collector current ICRM tp limited by Tvj op 100 A Gate-emitter peak voltage VGES ±20 V Table 10 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Collector-emitter saturation voltage VCE sat IC = 50 A, VGE = 15 V Tvj = 25 °C 1.50 1.80 V Tvj = 125 °C 1.64 Tvj = 175 °C 1.72 Gate threshold voltage VGEth IC = 1.28 mA, VCE = VGE, Tvj = 25 °C 5.15 5.80 6.45 V Gate charge QG VGE = ±15 V, VCE = 600 V 0.92 µC Internal gate resistor RGint Tvj = 25 °C 0 Ω Input capacitance Cies f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 11.1 nF Reverse transfer capacitance Cres f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 0.039 nF Collector-emitter cut-off current ICES VCE = 1200 V, VGE = 0 V Tvj = 25 °C 0.0062 mA Gate-emitter leakage current IGES VCE = 0 V, VGE = 20 V, Tvj = 25 °C 100 nA (table continues...) FP75R12N3T7 EconoPIM™3 module Datasheet 7 Revision 0.20 2022-03-02
Table 10 (continued) Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Turn-on delay time (inductive load) tdon IC = 50 A, VCE = 600 V, VGE = ±15 V, RGon = 7.5 Ω Tvj = 25 °C 0.052 µs Tvj = 125 °C 0.059 Tvj = 175 °C 0.060 Rise time (inductive load) tr IC = 50 A, VCE = 600 V, VGE = ±15 V, RGon = 7.5 Ω Tvj = 25 °C 0.060 µs Tvj = 125 °C 0.062 Tvj = 175 °C 0.064 Turn-off delay time (inductive load) tdoff IC = 50 A, VCE = 600 V, VGE = ±15 V, RGoff = 7.5 Ω Tvj = 25 °C 0.269 µs Tvj = 125 °C 0.365 Tvj = 175 °C 0.404 Fall time (inductive load) tf IC = 50 A, VCE = 600 V, VGE = ±15 V, RGoff = 7.5 Ω Tvj = 25 °C 0.110 µs Tvj = 125 °C 0.207 Tvj = 175 °C 0.269 Turn-on energy loss per pulse Eon IC = 50 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGon = 7.5 Ω, di/dt = 625 A/µs (Tvj = 175 °C) Tvj = 25 °C 5.36 mJ Tvj = 125 °C 6.34 Tvj = 175 °C 6.79 Turn-off energy loss per pulse Eoff IC = 50 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGoff = 7.5 Ω, dv/dt =
3045 V/µs (Tvj = 175 °C)
Tvj = 25 °C 3.41 mJ Tvj = 125 °C 5.36 Tvj = 175 °C 6.57 SC data ISC VGE ≤ 15 V, VCC = 800 V, VCEmax=VCES-LsCE*di/dt tP ≤ 8 µs, Tvj=150 °C 190 A tP ≤ 7 µs, Tvj=175 °C 180 Thermal resistance, junction to case RthJC per IGBT 0.598 K/W Thermal resistance, case to heat sink RthCH per IGBT , λgrease= 1 W/(m*K) 0.0764 K/W Temperature under switching conditions Tvj op -40 175 °C Note: T vj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14. FP75R12N3T7 EconoPIM™3 module Datasheet 8 Revision 0.20 2022-03-02
6 Diode, Brake-Chopper
Table 11 Maximum rated values Parameter Symbol Note or test condition Values Unit Repetitive peak reverse voltage VRRM Tvj = 25 °C 1200 V Continuous DC forward current IF 25 A Repetitive peak forward current IFRM tP = 1 ms 50 A I2t - value I2t tP = 10 ms, VR = 0 V Tvj = 125 °C 80 A²s Tvj = 175 °C 70 Table 12 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Forward voltage VF IF = 25 A Tvj = 25 °C 1.83 2.30 V Tvj = 125 °C 1.70 Tvj = 150 °C 1.63 Peak reverse recovery current IRM VR = 600 V, IF = 25 A, VGE = -15 V, -diF/dt = 685 A/µs (Tvj = 175 °C) Tvj = 25 °C 16 A Tvj = 125 °C 21 Tvj = 175 °C 23 Recovered charge Qr VR = 600 V, IF = 25 A, VGE = -15 V, -diF/dt = 685 A/µs (Tvj = 175 °C) Tvj = 25 °C 1.67 µC Tvj = 125 °C 3.26 Tvj = 175 °C 4.23 Reverse recovery energy Erec VR = 600 V, IF = 25 A, VGE = -15 V, -diF/dt = 685 A/µs (Tvj = 175 °C) Tvj = 25 °C 0.54 mJ Tvj = 125 °C 1.17 Tvj = 175 °C 1.58 Thermal resistance, junction to case RthJC per diode 1.43 K/W Thermal resistance, case to heat sink RthCH per diode, λgrease= 1 W/(m*K) 0.182 K/W Temperature under switching conditions Tvj op -40 175 °C Note: T vj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14. FP75R12N3T7 EconoPIM™3 module Datasheet 9 Revision 0.20 2022-03-02
7 NTC-Thermistor
Table 13 Characteristic values Parameter Symbol Note or test condition Values Unit Min. Typ. Max. Rated resistance R25 TNTC = 25 °C 5 kΩ Deviation of R100 ΔR/R TNTC = 100 °C, R100 = 493 Ω -5 5 % Power dissipation P25 TNTC = 25 °C 20 mW B-value B25/50 R2 = R25 exp[B25/50(1/T2-1/(298,15 K))] 3375 K B-value B25/80 R2 = R25 exp[B25/80(1/T2-1/(298,15 K))] 3411 K B-value B25/100 R2 = R25 exp[B25/100(1/T2-1/(298,15 K))] 3433 K Note: Specification according to the valid application note. FP75R12N3T7 EconoPIM™3 module Datasheet 10 Revision 0.20 2022-03-02
8 Characteristics diagrams
Output characteristic (typical), IGBT , Inverter IC = f(VCE) VGE = 15 V Output characteristic field (typical), IGBT , Inverter IC = f(VCE) Tvj = 175 °C 100 125 150 100 125 150 Transfer characteristic (typical), IGBT , Inverter IC = f(VGE) VCE = 20 V Switching losses (typical), IGBT , Inverter E = f(IC) RGoff = 5.6 Ω, RGon = 5.6 Ω, VGE = ±15 V, VCE = 600 V 5 6 7 8 9 10 11 12 13 100 125 150 0 15 30 45 60 75 90 105 120 135 150 FP75R12N3T7 EconoPIM™3 module Datasheet 11 Revision 0.20 2022-03-02
Switching losses (typical), IGBT , Inverter E = f(RG) VGE = ±15 V, IC = 75 A, VCE = 600 V Switching times (typical), IGBT , Inverter t = f(IC) RGoff = 5.6 Ω, RGon = 5.6 Ω, VGE = ±15 V, VCE = 600 V, Tvj = 175 0 5 10 15 20 25 30 35 40 45 50 55 60 0 15 30 45 60 75 90 105 120 135 150 0.01 0.1 Switching times (typical), IGBT , Inverter t = f(RG) VGE = ±15 V, IC = 75 A, VCE = 600 V, Tvj = 175 °C Transient thermal impedance , IGBT , Inverter Zth = f(t) 0 5 10 15 20 25 30 35 40 45 50 55 60 0.01 0.1 0.001 0.01 0.1 1 10 0.01 0.1 FP75R12N3T7 EconoPIM™3 module Datasheet 12 Revision 0.20 2022-03-02
Reverse bias safe operating area (RBSOA), IGBT , Inverter IC = f(VCE) RGoff = 5.6 Ω, VGE = ±15 V, Tvj = 175 °C Voltage slope (typical), IGBT , Inverter dv/dt = f(RG) IC = 75 A, VCE = 600 V, VGE = ±15 V, Tvj = 25 °C 0 200 400 600 800 1000 1200 1400 100 125 150 175 200 0 5 10 15 20 25 30 35 40 45 50 55 60 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 Capacity characteristic (typical), IGBT , Inverter C = f(VCE) f = 100 kHz, VGE = 0 V, Tvj = 25 °C Gate charge characteristic (typical), IGBT , Inverter VGE = f(QG) IC = 75 A, Tvj = 25 °C 0 10 20 30 40 50 60 70 80 90 100 0.01 0.1 100 -15 -10 FP75R12N3T7 EconoPIM™3 module Datasheet 13 Revision 0.20 2022-03-02
Forward characteristic (typical), Diode, Inverter IF = f(VF) Switching losses (typical), Diode, Inverter Erec = f(IF) RGon = 5.6 Ω, VR = 600 V 100 125 150 0 15 30 45 60 75 90 105 120 135 150 Switching losses (typical), Diode, Inverter Erec = f(RG) IF = 75 A, VR = 600 V Transient thermal impedance, Diode, Inverter Zth = f(t) 0 5 10 15 20 25 30 35 40 45 50 55 60 0.001 0.01 0.1 1 10 0.01 0.1 FP75R12N3T7 EconoPIM™3 module Datasheet 14 Revision 0.20 2022-03-02
Forward characteristic (typical), Diode, Rectifier IF = f(VF) Transient thermal impedance, Diode, Rectifier Zth = f(t) 105 120 135 150 0.001 0.01 0.1 1 10 0.01 0.1 Output characteristic (typical), IGBT , Brake-Chopper IC = f(VCE) VGE = 15 V Forward characteristic (typical), Diode, Brake- Chopper IF = f(VF) 100 FP75R12N3T7 EconoPIM™3 module Datasheet 15 Revision 0.20 2022-03-02
Temperature characteristic (typical), NTC-Thermistor R = f(TNTC) 0 25 50 75 100 125 150 175 100 1000 10000 100000 FP75R12N3T7 EconoPIM™3 module Datasheet 16 Revision 0.20 2022-03-02
9 Circuit diagram
J Figure 1 FP75R12N3T7 EconoPIM™3 module Datasheet 17 Revision 0.20 2022-03-02
EconoPIM™3 module Datasheet 18 Revision 0.20 2022-03-02
11 Module label code
Code format Data Matrix Barcode Code128 Encoding ASCII text Code Set A Symbol size 16x16 23 digits Standard IEC24720 and IEC16022 IEC8859-1 Code content Content Module serial number Module material number Production order number Date code (production year) Date code (production week) Digit 1 – 5 6 - 11 12 - 19 20 – 21 22 – 23 Example 71549 142846 55054991 Example 7154914284655054991153071549142846550549911530 Figure 3 FP75R12N3T7 EconoPIM™3 module Datasheet 19 Revision 0.20 2022-03-02
Revision history
Document revision Date of release Description of changes 0.10 2021-12-23 Initial version 0.20 2022-03-02 Preliminary datasheet FP75R12N3T7 EconoPIM™3 module Datasheet 20 Revision 0.20 2022-03-02
All referenced product or service names and trademarks are the property of their respective owners. Edition 2022-03-02 Published by Infineon Technologies AG
81726 Munich, Germany
© 2022 Infineon Technologies AG All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference IFX-ABB809-002 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.