FMWGCOV102-15 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Copyright © 2020 FMWGCOV102-15 is a radome cover for 15 dBi WR-102 Standard Gain Horn antenna. This waveguide antenna radome cover is made from high strength, thermally stable Polymethacrylimide (PMI). PMI offers a low Relative Permittivity (Dielectric Constant) at the high frequency ranges seen with microwave and millimeter wave components. This allows for minimal signal loss or attenuation over other materials. Increase your system capabilities with our PMI radome covers, designed to enhance the durability and longevity of standard gain horn antennas. Shielding against environmental elements, our radome covers ensure consistent signal integrity in any conditions. FMWGCOV102-15 has internal dimensions of 2.9 in by 2.15 in and will fit 15 dBi WR-102 standard gain horns. Fairview Microwave offers a wide selection of high performance waveguide components available in stock and same-day shipping to customers worldwide. Mechanical Specifications Body Material Polymethacrylimide (PMI) Length 3.09 in [78.49 mm] Width 2.327 in [59.11 mm] Height 0.276 in [7.01 mm] Weight 0.09 lbs [40.82 g] MechanicalPerformance Typical Density (kg/m²) Compressive Strength MPa Compression Modulus (MPa) Tensile Strength (MPa) Tensile Modulus (MPa) Fracture Growth Rate(%) Bending Strength (MPa) Bending Modulus (MPa) Deflection (MPa) 200 8.5 317 7.5 410 2.4 13 449 22 Standard Test GB/T 8813-2008 GB/T9641-1988 GB/T8812.2-2007 ElectricalPerformance Frequency Antenna Radome Material 2 2.5 2.8 5 10 26 26.5 Tolerance εr (Relative Permittivity) Remarks: 1.Testmethod:GB/T - 5597 - 1999 "TestMethod forMicrowaveComplexPermittivity ofSolid Dielectric". 2.Samplesize:diameter51mm,thickness5mm. 3. Sampling rate and data processing: 5 samples were tested for each material, each sample was tested on both sides,andatotalof80samples wereobtainedforeachmaterial. datapoints,andtaketheaveragetoobtainthefinaldata. 15 dBi WR-102 Standard Gain Horn Radome Cover Fairview Microwave 301 Leora Ln., Suite 100 Lewisville, TX 75056 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Features:
- 15 dBi WR-102 Waveguide Standard Gain Horn
- Polymethacrylimide
- Low Relative Permittivity (Dielectric Constant)
- Minimal reflection or attenuation of signal FMWGCOV102-15 DATA SHEET
Compliance Certifications (see product page for current document) 15 dBi WR-102 Standard Gain Horn Radome Cover from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 15 dBi WR-102 Standard Gain Horn Radome Cover FMWGCOV102-15 URL: https://www.fairviewmicrowave.com/15-dbi-wr-102-standard-gain-horn-radome-cover-fmwgcov102-15-p.aspx 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 2 of 3 FMWGCOV102-15 DATA SHEET
301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 3 of 3 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: 3.090 78.5 2.933 74.5 2.327 59.1 2.169 55.1 AA .276 7.0 .197 5.0 SECTION A-A REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 10/20/2023 DMAY KHIETPAS SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMWGCOV102-15 A
DESCRIPTION
RADOME COVER FOR WR102 WITH 15 dBi GAIN STANDARD GAIN HORN DMAY SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize
1 OF 1
15 dBi WR-102 Standard Gain Horn Radome Cover