FMS6203 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6203 • Rev. 1.0.4 FMS6203 — Low-Cost, 3-Channel, Video Filter Driver for SD/PS/HD FMS6203 Low-Cost, 3-Channel, Video Filter Driver for SD/PS/HD
Features
Three 6th-Order Video Anti-Aliasing or Reconstruction Filters Supports Component YPrPb or RGB Video Three Channels: Selectable to 8MHz, 16MHz, or 32MHz for SD/PS/HD Applications Includes Wide Bandwidth Bypass Mode 6dB Gain Option Available for 150Ω Double Terminated Video Load 0dB Gain Option Available for High-Impedance Loading Selectable Clamp or Bias Mode on Pb/B, Pr / B,R Inputs Inputs and Outputs can be AC- or DC-Coupled DC-Coupled Outputs Eliminate Coupling Capacitors Output Disable Single 5V Supply 2kV CDM / 8kV HBM ESD Protection
Applications
Cable and Satellite Set-Top Boxes DVD Players HDTV Personal Video Recorders (PVR) Video On Demand (VOD)
Description
FMS6203 offers comprehensive filtering for set-top box or DVD applications. It is intended to replace passive LC filters and drivers with a low-cost integrated device. Filter channels are specialized for either component (YPbPr) or RGB video signals. These channels offer a selectable frequency response of 8, 16, or 32MHz. The filters can also be bypassed for high-frequency operation. Additional functionality of these channels includes input biasing mode and output disable. The FMS6203 may be driven directly by a DC-coupled DAC output or an AC-coupled signal. All inputs accept standard 1V pp video signals. Each channel includes an output amplifier capable of driving a single (150 Ω) AC- or DC-coupled video load. All outputs can be disabled to save power in DC- coupled applications. The device is available in two factory-set options, a 0dB gain option and a 6dB gain option. Figure 1. Block Diagram
Ordering Information
Gain Setting Eco Status Package Packing Method FMS6203MTC1400X -40°C to +85°C 0dB RoHS TSSOP-14 Tape and Reel FMS6203MTC1406X -40°C to +85°C 6dB RoHS TSSOP-14 Tape and Reel For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Note: 1. Moisture sensitivity level is MSL-1.
Figure 2. Pin Configuration
1 V CC Input +5V supply
2 F SEL0 Input Selects filter corner frequency
3 Y/G In Input Selectable video input
4 Pb/B In Input Selectable video input
5 Pr/R In Input Selectable video input
6 BIAS Input Input bias on Pb/B Pr/R: 0=Bias 1=Clamp
7 GND Input Must be tied to ground. Do not float. 8 GND Input Must be tied to ground. Do not float.
9 OE Input Output disable control: 0=Disable, 1=Enable
10 Pr/R Out Output Filtered SD, PS, HD, BP video output
11 Pb/B Out Output Filtered SD, PS, HD, BP video output
12 Y/G Out Output Filtered SD, PS, HD, BP video output
13 F SEL1 Input Selects filter corner frequency
14 V CC Input +5V supply
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6203 • Rev. 1.0.4 3 FMS6203 — Low-Cost, 3-Channel, Video Filter Driver for SD/PS/HD Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may dam age the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC DC Supply Voltage -0.3 6.0 V VIO Analog and Digital I/O -0.3 V CC+0.3 V IOUT Output Current, Any One Channel, Do Not Exceed 50 mA Reliability Information Symbol Parameter Min. Typ. Max. Unit TJ Junction Temperature +150 °C TSTG Storage Temperature Range -65 +150 °C TL Lead Temperature, Soldering 10 Seconds +300 °C ΘJA Thermal Resistance, JEDEC Standard Multi-Layer Test Boards, Still Air 97 °C/W Electrostatic Discharge Information Symbol Parameter Max. Unit Human Body Model, JESD22-A114 8 ESD Charged Device Model, JESD22-C101 2 kV Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ens ure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Typ. Max. Unit TA Operating Temperature Range -40 +85 °C VCC Supply Voltage Range 4.75 5.00 5.25 V
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6203 • Rev. 1.0.4 4 FMS6203 — Low-Cost, 3-Channel, Video Filter Driver for SD/PS/HD Unless otherwise noted, T A=25°C, VCC=5V, RSOURCE=37.5Ω, inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options. Symbol Parameter Conditions Min. Typ. Max. Units ICC Supply Current (2) No Load 36 75 mA ICC1 Supply Current (2) No Load, Output Disabled 15 35 mA VIN Video Input Voltage Range Referenced to GND if DC Coupled 1.0 V PP VIL Digital Input Low (2) F SEL0, FSEL1 0 0.8 V VIH Digital Input High (2) F SEL0, FSEL1 2.4 V CC V tENABLE Output Enable Time 150Ω DC Load 300 ns Note: 2. 100% tested at 25°C Standard Definition Electrical Characteristics Unless otherwise noted, T A=25°C, VIN=1VPP, VCC=5V, RSOURCE=37.5Ω, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options. Symbol Parameter Conditions Min. Typ. Max. Units AVSD Channel Gain Error (3) -0.4 0 0.4 dB f1dBSD -1dB Bandwidth (3) 5.20 7.15 MHz fcSD -3dB Bandwidth 8 MHz fSBSD Attenuation (Stopband Reject) (3) f=27MHz 40 50 dB DG Differential Gain 0.3 % DP Differential Phase 1.0 ° THD Total Harmonic Distortion, Output V OUT=1.4VPP, 3.58MHz 0.6 % XTALKSD Crosstalk (Channel-to-Channel) 1MHz -70 dB SNR Signal-to-Noise Ratio (4) NTC-7 Weighting, 100kHz to 4.2MHz 75 dB tpdSD Propagation Delay Delay from Input to Output, 4.5MHz 85 ns Notes: 3. 100% tested at 25°C. 4. SNR=20 • log (714mV/rms noise). Progressive Scan Electrical Characteristics Unless otherwise noted, T A=25°C, VIN=1VPP, VCC=5V, RSOURCE=37.5Ω, inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options. Symbol Parameter Conditions Min. Typ. Max. Units AVPS Channel Gain Error (5) -0.4 0 0.4 dB f1dBSPS -1dB Bandwidth (5) 10.0 13.5 MHz fcPS -3dB Bandwidth 16 MHz fSBPS Attenuation (Stopband Reject) (5) f=54MHz 37 44 dB THD Total Harmonic Distortion, Output V OUT=1.4VPP, 7MHz 0.55 % XTALKPS Crosstalk (Channel-to-Channel) 1MHz -75 dB SNR Signal-to-Noise Ratio (6) Unweighted; 100kHz to 15MHz 66 dB tpdPS Propagation Delay Delay from Input to Output, 10MHz 47 ns Notes: 5. 100% tested at 25°C. 6. SNR=20 • log (714mV/rms noise).
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6203 • Rev. 1.0.4 5 FMS6203 — Low-Cost, 3-Channel, Video Filter Driver for SD/PS/HD High-Definition Electrical Characteristic Unless otherwise noted, T A=25°C, VIN=1VPP, VCC=5V, RSOURCE=37.5Ω, inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options. Symbol Parameter Conditions Min. Typ. Max. Units AVHD Channel Gain Error (7) -0.4 0 0.4 dB f1dBHD -1dB Bandwidth (7) 28 31 MHz fcHD -3dB Bandwidth 32 MHz fSBHD Attenuation (Stopband Reject) (7) f=74.25MHz 30 40 dB VOUT=0.7VPP, 22MHz, 0dB, 10kΩ Load 0.5 THD Total Harmonic Distortion, Output VOUT=1.4VPP, 22MHz, 6dB, 150Ω Load 0.5 1MHz -75 dB XTALKHD Crosstalk (Channel-to-Channel) 30MHz -57 dB SNR Signal-to-Noise Ratio (8) Unweighted, 100kHz to 30MHz 66 dB tpdHD Propagation Delay Delay from Input to Output, 20MHz 25 ns Notes: 7. 100% tested at 25°C. 8. SNR=20 • log (714mV/rms noise). Bypass Mode Electrical Characteristics Unless otherwise noted, T A=25°C, VIN=1VPP, VCC=5V, RSOURCE=37.5Ω, inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options. Symbol Parameter Conditions Min. Typ. Max. Units AVBP Channel Gain Error (9) DC -0.4 0 0.4 dB f1dBBP -1dB Bandwidth 90 MHz fcBP -3dB Bandwidth 115 MHz VOUT=0.7VPP, 22MHz, 0dB, 10kΩ Load 0.3 THD Total Harmonic Distortion, Output VOUT=1.4VPP, 22MHz, 6dB, 150Ω Load 0.25 1MHz -74 dB XTALKBP Crosstalk (Channel-to-Channel) 30MHz -64 dB SNR Signal-to-Noise Ratio (10) Unweighted, 100kHz to 30MHz 70 dB Notes: 9. 100% tested at 25°C. 10. SNR=20 • log (714mV/rms noise).
recommended routing rules listed below. Do not run analog and digital signals in parallel. Run traces on top of the ground plane at all times. Do not run traces over ground/power splits. Avoid routing at 90-degree angles. the device on the top layer. bottom plane) each other on the PCB. Maximize thermal performance of the PCB. Consider 70µm copper for high-power designs. of board area, not copper thickness. distortion (video tilt) is kept as low as possible. Figure 3. Distance from Device Pin to Series
0.43 TYP
Figure 4. 14-Lead Thin Shrink Small Outline Package (TSSOP) the warranty therein, which covers Fairchild products.
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6203 • Rev.1.0.4 8 FMS6203 — Low-Cost, 3-Channel, Video Filter Driver for SP/PS/HD
www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative © Semiconductor Components Industries, LLC