FMS6151 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6151 • Rev. 1.0.6 June 2010 FMS6151 — Ultra-Portable Video Filter Driver FMS6151 Ultra-Portable Video Filter Driver

Features

5th-Order 8MHz (SD) Filter Power Down to 25nA DC-Coupled Input AC- or DC-Coupled Output DC-Coupled Output Eliminates AC-Coupling Cap SAG Correction Reduces Size of AC-Coupling Cap Fixed Gain of 6dB Small, Lead-Free, MicroPak™ Packaging

Applications

Personal Digital Assistants Set Top Boxes Digital Video Recorders

Description

The FMS6151 low-cost integrated video fi lter is intended to replace passive LC fi lters and drivers in low-voltage portable video applications. The 5th-order fi lter provides better image quality compared to typical 2nd- and 3rd- order passive solutions. The FMS6151 is intended to be directly driven by a DC- coupled DAC output. The output can drive an AC- or DC- coupled doubly terminated coax (150Ω) load. DC-coupling the output removes the need for an expensive output coupling capacitor. If an AC-cou pled output is needed, the SAG correction circuit can be used to reduce the AC out- put coupling capacitor value. Input DC levels are offset by approximately 100mV. This internal level shift is incorpo- rated to prevent sync pulse clipping. Offering SAG correction, 6dB fi xed gain, and a 5th-order low-pass fi lter in a space-saving MicroPak™ package makes the FMS6151 well suited for space-sensitive appli- cations, such as cellular phones and digital cameras.

Ordering Information

Part Number Operating Temperature Range Package Packaging Method FMS6151L6X -40°C to +105°C 6-Lead MicroPak™ Reel Block Diagram Figure 1. Block Diagram

Figure 2. Pin Assignments

2 GND Input Ground

3 SAG Input SAG

6 EN Input Enable 0 = Disabled 1 = Enabled

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6151 • Rev. 1.0.6 3 FMS6151 — Ultra-Portable Video Filter Driver Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Parameter Min. Max. Unit DC Supply Voltage -0.3 6.0 V Analog and Digital I/O -0.3 +V CC +0.3 V Maximum Output Current, Do Not Exceed 45 mA Electrostatic Discharge Protection Level Human Body Model, JESD22-A114 6 kVCharged Device Model, JESD22-C101 2 Reliability Information Parameter Min. Typ. Max. Unit Junction Temperature +150 °C Storage Temperature Range -65 +150 °C Thermal Resistance (θJA), JDEC Standard, Multi-layer Test Boards, Still Air 271 °C/W Recommended Operating Conditions The Recommended Operating Conditions table defi nes the conditions for actual device operation. Recommended operating conditions are specifi ed to ensure optimal performance to the datasheet specifi cations. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Parameter Min. Typ. Max. Unit Operating Temperature Range -40 +105 °C Supply Voltage Range 2.5 2.7 3.6 V

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6151 • Rev. 1.0.6 4 FMS6151 — Ultra-Portable Video Filter Driver TA = 25°C, VCC = 2.7V, Rs = 37.5Ω, AC-coupled output into 150Ω load, SAG pin connected to VOUT pin, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units ICC Supply Current(1) VCC = 2.7V, No Load 3.8 6.4 mA VIN Video Input Voltage Range Referenced to GND 1.2 V pp Vols Output Level Shift (1) VIN = 0V 50 200 350 mV PSRR Vols over power supply V CC = 2.7V to 3.3V 40 dB ISH Shut Down Current 25 nA Vil Disabled Logic Low(1) 0 0.8 V Vih Enabled Logic High(1) VCC *0.6 V CC V tON Enable Time 1.5 μs tOFF Disable Time 50 ns TA = 25°C, VCC = 2.7V, Rs = 37.5Ω, AC-coupled output into 150Ω load, SAG pin connected to VOUT pin, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units AV Gain(1) DC 6.0 6.2 6.4 dB f1dB -1dB Bandwidth(1) 5.0 6.7 MHz fc -3dB Bandwidth 8 MHz fSB Attenuation(1) (Stopband Reject) 27MHz 40 47 dB DG Differential Gain 0.5 % DP Differential Phase 0.5 ° SNR Signal-to-Noise Ratio NTC-7 Weighting, 100kHz to 4.2MHz 78 dB Note: 100% tested at 25°C.1.

3.6 Icc (mA)

Figure 9. Supply Current vs. Temperature Figure 10. Shutdown Current vs. Temperature

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6151 • Rev. 1.0.6 7 FMS6151 — Ultra-Portable Video Filter Driver

Application Information

The FMS6151 is intended to be directly driven by a DC- coupled DAC output. The input common-mode range of the FMS6151 is 1.2V pp, ground referenced. Enable/Shutdown The FMS6151 has a shutdown feature that disables the output and reduces the quiescent current to ~25nA. This feature is especially useful in portable applications, such as cellular phones, hand held gaming devices, and video cameras requiring video fi ltering and drive capability. Internal Level Shift The FMS6151 has an internal level-shift circuit to avoid sync tip clipping. The output signal is shifted 200mV toward the V CC rail to help prevent clipping. This offset is useful when DC coupled out or using SAG correction. SAG Correction SAG correction provides excellent performance with a small output coupling capacitor. It eliminates the 220μF - 1000μF output cou pling capacitors traditionally used. The traditional output circuit (220μF into 150Ω load) creates a single pole (-3dB) at 5Hz. Reducing this capacitor causes excessive phase shift, resulting in video fi eld tilt that can prevent proper recovery of the syn chronization signals. The FMS6151 SAG correction circuit provides a small amount of peaking, which provides compensation of the phase response, signifi cantly reducing video fi eld tilt. The SAG correction circuit allows decrease of the large 220μF output coupling capacitor. A 22μF is used for SAG correc- tion and a 47 μF is used for the out put coupling capacitor; much smaller and cheaper than traditional circuit requirements. Output Confi guration The FMS6151 output is a low-impedance voltage driver. It is capable of driving an AC- or DC-coupled single load. For more application information, please refer to

Figure 11. 6-Lead MicroPak™ Package specifi cally the warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/packaging/.

  1. DIMENSIONS ARE IN MILLIMETERS
  2. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
  3. FILENAME AND REVISION: MAC06AREV4
  4. DRAWING CONFORMS TO ASME Y14.5M-1994

0.075 X 45

0.10 C B A

  1. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY

OTHER LINE IN THE MARK CODE LAYOUT.

FMS6151 — Ultra-Portable Video Filter Driver © 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6151 Rev. 1.0.6 9

www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative © Semiconductor Components Industries, LLC