FMMT4124 RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES
- Case: Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.008 gram SOT-23 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 O C ambient temperature unless otherwise specified. Single phase , half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. 0.118(3.00) 0.012(0.30) 0.020(0.50) 0.003(0.08) 0.006(0.15) 0.110(2.80) 0.019(2.00) 0.071(1.80) 0.100(2.55) 0.089(2.25) 0.020(0.50) 0.012(0.30) 0.043(1.10) 0.035(0.90) 0.004(0.10) 0.000(0.00) TECHNICAL SPECIFICATION SOT-23 BIPOLAR TRANSISTORS TRANSISTOR(NPN) 2006-3 ELECTRICAL CHARACTERISTICS ( @ TA = 25 oC unless otherwise noted ) Marking ZC 0.055(1.40) 0.047(1.20) BASE EMITTER COLLECTOR DC current gain (VEB= 3V, IC= 0) Collector cut-off current (VCB= 20V, IE=0) Transition frequency (VCE= 20V, IC= -10mA, f=100MHZ) Collector-emitter saturation voltage (VCE= 1V, IC= 2mA) Base-emitter saturation voltage (IC= 50mA, IB= 5mA) Base-emitter voltage ((IC= 50mA, IB= 5mA) CHARACTERISTICS SYMBOL UNITS 0.05 360 0.3 mA mA V V V V V Collector-base breakdown voltage (IC= 10mA, IE=0) Collector-emitter breakdown voltage (IC= 1mA, IB=0) Emitter-base breakdown voltage (IE= 10mA, IC=0) V(BR)CBO V(BR)CEO V(BR)EBO IEBO hFE ICBO VCE(sat) VBE(sat) fT MAX - MHZ 300 120 MIN - 0.05 0.95 TYP * Power dissipation PCM : 0.33 W (Tamb=25OC) * Collector current ICM : 0.2 A * Collector-base voltage V(BR)CBO : 30 V * Operating and storage junction temperature range TJ,Tstg: -55OC to +150OC FMMT4124 Note 1: "Fully ROHS compliant", "100% Sn plating (Pb-free)".
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE