FMHR0167 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

REV 1.1 Page 1 of 6 Copyright © 2019 Temperature conditioned low loss TNC Female Bulkhead to N Male cable assemblies with RF test reports from Fairview Microwave are part of our full line of reliable RF components available to ship same day. These COTS (commercial-off-the- shelf) cable assemblies using LL142 triple shielded coax with expanded PTFE dielectric have traceable processes and materials that are recorded and provided in the included test report. The temperature pre-conditioned coaxial cable and captivated stainless steel RF connectors are assembled with J-STD-001 soldering processes and meet WHMA-A-620 workmanship criteria. The carefully selected materials, temperature conditioning, assembly processes and test sequence ensure a dependable cable assembly for high-reliability applications with wide temperature excursions and where the cost of failure is high. Each serialized TNC to N low loss cable assembly is traceable to its component lots and test data ships with every cable. The data sheet for this low loss temperature tolerant hi-rel cable assembly using LL142 expanded PTFE cable includes specifications, CAD drawing and dimensions that are shown below. Fairview Microwave offers these high-reliability RF cable assemblies with test data and many other RF, microwave and millimeter wave components which allow designers to configure and customize their signal systems however they like. Whether the need is to provide reliable interconnects over wide temperature extremes or have supporting test reports, Fairview Microwave has the right cable assemblies for the job. Fairview can also expertly build your custom RF cable assemblies for you and ship same day. Referenced Specifications IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies MIL-STD-348 Radio Frequency Connector Interfaces for MIL- DTL-3643, MIL-DTL-3650, MIL-DTL-3655, MIL- DTL-25516, MIL-PRF-31031, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF... IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies IPC J-STD-006 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications SAE AS5942 Marking of Electrical Insulating Materials SAE AS23053 Insulation Sleeving, Electrical, Heat Shrinkable, General Specifications For Material Specifications Component Specification Cable LL1 42 per LL142 datasheet Connector 1 FMCN1077 per MIL-STD-348 Connector 2 FMCN1084 per MIL-STD-348 Heat Shrink 1 SU MITUBE W3B2(4X) 12/3 per SAE AS23053 as applicable Heat Shrink 2 SU MITUBE W3B2(4X) 12/3 per SAE AS23053 as applicable Heat Shrink 3 M23053/4-303-0 per SAE AS23053 Heat Shrink 4 M23053/4-303-0 per SAE AS23053 Solder SN63 per J-STD-006 Temperature Conditioned Low Loss TNC Female Bulkhead to N Male Cable LL142 Coax Fairview Microwave 301 Leora Ln., Suite 100 Lewisville, TX 75056 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Configuration:

  • Connector 1: FMCN1077 (TNC F emale Bulkhead)
  • Connector 2: FMCN1084 (N Male)
  • Cable: LL142 Features:
  • Max Frequency 18 GHz
  • 80% Phase Velocity
  • Triple Shielded
  • FEP Jacket
  • Temperature Pre-Conditioned Cable
  • J-STD Soldering
  • Lot Traceability
  • Captivated Stainless Steel Con- nectors
  • Expanded PTFE dielectric
  • Serialized Test Data & Report
  • In-stock and ships same day Applications:
  • General Purpose
  • Laboratory Use
  • Extreme Temperatures
  • Hi-Reliability
  • Unmanned Systems
  • COTS Solutions
  • Avionics
  • Electronic Countermeasures(ECM) FMHR0167 DATA SHEET

.Description Min Typ Max Units Frequency Range D C 18 GHz VSWR 1.37:1 Velocity of Propagation 80 % Capacitance 25 [8 2.02] pF/ft [pF/m] Dielectric Withstanding Voltage (AC) 1,000 Vr ms Specifications by Frequency .Description F1 F2 F3 F4 F5 Units Frequency 1 2 4.5 9 18 GHz Electrical Specification Notes: Insertion Loss does not include the loss of the connectors. Insertion Loss is estimated as 0.06*SQRT(FGHz) dB for the TNC Male Right Angle connector and 0.05*SQRT(FGHz) dB for the N Male connector. Mechanical Specifications Cable Assembly Description Min Typ Max Units Cable Outer Diameter 0.19 0.195 0.2 in Weight 0.17 [7 7.11] lbs [g] Cable Characteristics .Component Specification Cable Type LL142 Impedance 50 Ohms Inner Conductor Type Solid Inner Conductor Mat. & Plat. Copper , Silver Dielectric Type Expanded PTFE T ape Number of Shields 3 Shield Layer 1 Silv er Plated Copper Tape Shield Layer 2 Aluminum P olyester Shield Layer 3 Silv er Plated Copper Wire Jacket Material FEP 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 2 of 6 FMHR0167 DATA SHEET

Description Connector 1 Connector 2 Type TNC F emale Bulkhead N M ale Specification MIL -STD-348 MIL -STD-348 Impedance 50 Ohms 50 Ohms Contact Mat. & Plat. B eryllium Copper, Gold over Nickel B eryllium Copper, Gold over Nickel Contact Plating Spec. 50 µ in minimum 50 µ in minimum Dielectric Type PTFE PTFE Outer Conductor Mat. & Plat. P assivated Stainless Steel Outer Conductor Plating Spec. S AE-AMS-2700 Body Mat. & Plat. P assivated Stainless Steel P assivated Stainless Steel Body Plating Spec. S AE-AMS-2700 S AE-AMS-2700 Coupling Nut Mat. & Plat. P assivated Stainless Steel Coupling Nut Plating Spec. S AE-AMS-2700 Hex Size 3/4 inch Seal Gasket Material Silicone R ubber Contact Gage Spec. 0.187 in min 0.210 in min Insulator Gage Spec. 0.188 to 0.208 in Environmental Specifications .Description Specification Temperature Operating Range -55 to +125 deg C Compliance Certifications (see product page for current document) Process Specifications .Process Specification Cable Preconditioning 5 cy cles, -55 °C to +125°C, 20 minute dwells Soldering in accordance with J- STD-001, class 3 Marking shall meet the adherence requirements of SAE AS5942 Workmanship shall be in accordance with IPC/WHMA-A-620, class 3 Tests and Inspections .Test Sampling Connector Gaging (pin and insulator position) 100% Insertion Loss 100% VSWR 100% Dielectric Withstanding Voltage (DWV) 100% Visual - workmanship, configuration and marking 100% Length C=0, 1.5 AQL 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 3 of 6 FMHR0167 DATA SHEET

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 4 of 6 Mass C=0, 1.5 AQL Plotted and Other Data Notes:

  • Values at 25°C, sea level. Typical Performance Data -1000 -700 -400 -100 200 500 800 1100 1400 1700 2000 -55 -35 -15 5 25 45 65 85 105 125 PPM ° C Typical Phase Change vs Temperature LL142 Cable How to Order Part Number Configuration: FMHR0167 - xx uu | | cm = Centimeters | <blank> = Inches | Length Example: FMHR0167-12 = 12 inches long cable FMHR0167-100cm = 100 cm long cable FMHR0167 DATA SHEET

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 5 of 6 FMHR0167 DATA SHEET Cable Assembly Length Tolerances: Temperature Conditioned Low Loss TNC Female Bulkhead to N Male Cable LL142 Coax from Fairview Microwave has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link to obtain additional part information: Temperature Conditioned Low Loss TNC Female Bulkhead to N Male Cable LL142 Coax FMHR0167 URL: https://www.fairviewmicrowave.com/temperature-conditioned-tnc-female-n-male-cable-ll142-coax-fmhr0167-p.aspx

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 6 of 6 .1885 .0015 [4.79 0.04] TYP. .441 .002 [11.20 0.05] *STANDARD TOLERANCES APPLY ONLY TO DIMENSIONS IN INCHES STANDARD TOLERANCES .X ±0.2 .XX ±0.01 .XXX ±0.005 .187 4.75 MAX PANEL .750 19.05 LENGTH MEASURED FROM FLANGE TO REF. PLANE 9/16 HEX LL142 3/4 HEX CAGE 53919 FMCN1077 TNC FEMALE BULKHEAD FMCN1084 N MALE NOTES: ALL BLACK HEAT SHRINK WITH WHITE MARKINGS.1. TOP LAYER: SUMITUBE W3B2 (4X) - SIZE 12/3.2. BOTTOM LAYER: M23053/4-303-0 MOUNTING HOLE FMHR0167-XXX D/C WWYY FAIRVIEWMICROWAVE SN XXXX SHEET 3FKR5 CAGE CODEDWG NO SIZE ASCALE N/ACAD FILE NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. TITLE FMHR0167 CN23791 OF 102/18/19 FMHR0167 DATA SHEET Temperature Conditioned Low Loss TNC Female Bulkhead to N Male Cable LL142 Coax