FMHR0106 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Copyright © 2018 MIL-DTL-17 SMA (M39012/55-3026) to SMA (M39012/56-3107) cable assemblies with test reports from Fairview Microwave are part of our full line of reliable RF components available with same-day shipping. These COTS (commercial- off-the-shelf) cable assemblies using M17/119-RG174 have traceable processes and materials that are recorded and provided in the included test report. The MIL-DTL-17 coaxial cable and MIL-PRF-39012 connectors are assembled with J-STD-001 soldering processes and meet WHMA-A-620 workmanship criteria. These carefully selected materials, assembly processes and test sequence ensure a dependable cable assembly for high reliability applications where the cost of failure or replacement is high. Each serialized SMA to SMA MIL-DTL-17 cable assembly is traceable to its component lots and test data ship with every cable. This MIL-C-17 M39012/55-3026 to M39012/56-3107 cable assembly using M17/119-RG174 datasheet PDF contains specifications, CAD drawing and dimensions that are shown below. Fairview Microwave offers these high reliability RF cable assemblies with test data, and many other RF, microwave and millimeter wave components which allow designers to configure and customize their signal systems however they like. Whether the need is to provide reliable MIL-DTL-17 interconnects or supporting test reports, Fairview Microwave has the right cable assemblies for the job. Fairview can also expertly build your custom cable assemblies for you and ship same day. Referenced Specifications IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies MIL-DTL-17 Cables, Radio Frequency , Flexible and Semirigid, General Specification for MIL-STD-348 Radio Frequency Connector Interfaces for MIL- DTL-3643, MIL-DTL-3650, MIL-DTL-3655, MIL- DTL-25516, MIL-PRF-31031, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF... MIL-PRF-39012 Connectors, Coaxial, Radio Frequency , General Specification for IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies IPC J-STD-006 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications SAE AS5942 Marking of Electrical Insulating Materials SAE AS23053 Insulation Sleeving, Electrical, Heat Shrinkable, General Specifications For SAE AS22520 Crimping Tools, Wire Termination, General Specification For Material Specifications . Component Specification Cable M17/119-RG174 in accordance with MIL-DTL-17 Connector 1 M39012/55-3026 in accordance with MIL-PRF-39012 Connector 2 M39012/56-3107 in accordance with MIL-PRF-39012 Heat Shrink 1 M23053/5-104-0 in accordance with SAE AS23053 Heat Shrink 2 M23053/5-105-0 in accordance with SAE AS23053 SMA Male to RA SMA Male MIL-DTL-17 Cable M17/119-RG174 Coax Fairview Microwave 301 Leora Ln., Suite 100 Lewisville, TX 75056 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Configuration:

  • Connector 1: M39012/55- 3026(SMA Male)
  • Connector 2: M39012/56- 3107(SMA Male Right Angle)
  • Cable: M17/119-RG174 Features:
  • Max Frequency 1 GHz
  • 65.9% Phase Velocity
  • PVC Jacket
  • J-STD-Soldering
  • Lot Traceability Data
  • Qualified cable and connectors (QPL)
  • Acceptance Test Report
  • RF Test Data
  • In stock and ready to ship Applications:
  • Hi-Reliability
  • Unmanned Systems
  • Drones
  • MIL-DTL-17 Requirements
  • Military Electronics FMHR0106 DATA SHEET

Solder SN63 in accordance with J- STD-006 Electrical Specifications . Description Min Typ Max Units Frequency Range D C 1,000 M Hz VSWR 1.5:1 Velocity of Propagation 65.9 % Capacitance 32.2 [105.64] pF/ft [pF/m] DC Resistance Inner Conductor 0.97 [3.18] Ω /1000ft [Ω/Km] Dielectric Withstanding Voltage (AC) 750 Vr ms Specifications by Frequency . Description F1 F2 F3 F4 F5 Units Frequency 50 100 400 1,000 MHz 0.21 0.33 0.82 1.48 dB/m Electrical Specification Notes: Insertion Loss does not include the loss of the connectors. Insertion Loss is estimated as 0.1dB per connector. Mechanical Specifications Cable Assembly Description Min Typ Max Units Cable Outer Diameter 0.105 0.11 0.115 in Weight 0.06 [2 7.22] lbs [g] Cable Characteristics Component Specification Cable Type M17/119-RG174 Impedance 50 Ohms Inner Conductor Type Str anded Inner Conductor Mat. & Plat. Copper Clad Steel Dielectric Type PE Number of Shields 1 Shield Layer 1 Tinned Copper Outer Conductor Diameter 0.088 in [2.24 mm] Jacket Material PVC 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 2 of 5 FMHR0106 DATA SHEET

Description Connector 1 Connector 2 Type SM A Male SM A Male Right Angle Specification MIL -PRF-39012 MIL -PRF-39012 Impedance 50 Ohms 50 Ohms Contact Mat. & Plat. B rass, Gold B rass, Gold Contact Plating Spec. A STM B488 A STM B488 Dielectric Type T eflon T eflon Body Mat. & Plat. Steel, P assivated Steel, Gold Body Plating Spec. QQ-P-35 A STM B488 Coupling Nut Mat. & Plat. Steel, P assivated Steel, P assivated Coupling Nut Plating Spec. QQ-P-35 AM S-QQ-P-35 Seal Gasket Material Silicone R ubber Contact Gage Spec. 0 .000 in min 0.000 in min Insulator Gage Spec. 0.000 in min 0.000 in min Mechanical Specification Notes: Environmental Specifications . Description Specification Temperature Operating Range -40 to +85 deg C Compliance Certifications (see product page for current document) Process Specifications . Process Specification Soldering in accordance with J- STD-001, class 3 Crimping dies in accordance with SAE AS22520 Marking shall meet the adherence requirements of SAE AS5942 Workmanship shall be in accordance with IPC/WHMA-A-620, class 3 Tests and Inspections . Test Sampling Connector Gaging (pin and insulator position) 100% Insertion Loss 100% VSWR 100% Dielectric Withstanding Voltage (DWV) 100% Visual - workmanship, configuration and marking 100% Length C=0, 1.5 AQL Mass C=0, 1.5 AQL 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 3 of 5 FMHR0106 DATA SHEET

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 4 of 5 Plotted and Other Data Notes:

  • Values at 25°C, sea level. How to Order Part Number Configuration: FMHR0106 - xx uu | | cm = Centimeters | <blank> = Inches | Length Example: FMHR0106-12 = 12 inches long cable FMHR0106-100cm = 100 cm long cable Cable Assembly Length Tolerances: SMA Male to RA SMA Male MIL-DTL-17 Cable M17/119-RG174 Coax from Fairview Microwave has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link to obtain additional part information: SMA Male to RA SMA Male MIL-DTL-17 Cable M17/119-RG174 Coax FMHR0106 URL: https://www.fairviewmicrowave.com/sma-male-ra-sma-male-cable-m17-119-rg174-coax-fmhr0106-p.aspx FMHR0106 DATA SHEET

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 5 of 5 *STANDARD TOLERANCES APPLY ONLY TO DIMENSIONS IN INCHES STANDARD TOLERANCES .X ±0.2 .XX ±0.01 .XXX ±0.005 LENGTH MEASURED FROM REF. PLANE TO CONTACT .312 HEX .312 HEX P1 P2 CAGE 53919 M23053/5-104-0 M17/119-RG174 FAIRVIEW MICROWAVE SN XXXX FMHR0106-XXX D/C WWYY M39012/55-3026 SMA MALE M39012/56-3107 SMA MALE RIGHT ANGLE RP RP CONTACT NOTES: 1. BLACK HEAT SHRINK WITH WHITE MARKINGS 3 PLACES. SHEET 3FKR5 CAGE CODEDWG NO SIZE ASCALE N/ACAD FILE NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. TITLE FMHR0106 CN23791 OF 111/16/18 FMHR0106 DATA SHEET SMA Male to RA SMA Male MIL-DTL-17 Cable M17/119-RG174 Coax