FMHR0002 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Copyright © 2018 MIL-DTL-17 BNC (M39012/16-0014) to N (M39012/01-0503) cable assemblies with test reports from Fairview Microwave are part of our full line of reliable RF components available with same-day shipping. These COTS (commercial- off-the-shelf) cable assemblies using M17/60-RG142 have traceable processes and materials that are recorded and provided in the included test report. The MIL-DTL-17 coaxial cable and MIL-PRF-39012 connectors are assembled with J-STD-001 soldering processes and meet WHMA-A-620 workmanship criteria. These carefully selected materials, assembly processes and test sequence ensure a dependable cable assembly for high reliability applications where the cost of failure or replacement is high. Each serialized BNC to N MIL-DTL-17 cable assembly is traceable to its component lots and test data ship with every cable. This MIL-C-17 M39012/16-0014 to M39012/01-0503 cable assembly using M17/60-RG142 datasheet PDF contains specifications, CAD drawing and dimensions that are shown below. Fairview Microwave offers these high reliability RF cable assemblies with test data, and many other RF, microwave and millimeter wave components which allow designers to configure and customize their signal systems however they like. Whether the need is to provide reliable MIL-DTL-17 interconnects or supporting test reports, Fairview Microwave has the right cable assemblies for the job. Fairview can also expertly build your custom cable assemblies for you and ship same day. Referenced Specifications IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies MIL-DTL-17 Cables, Radio Frequency , Flexible and Semirigid, General Specification for MIL-STD-348 Radio Frequency Connector Interfaces for MIL- DTL-3643, MIL-DTL-3650, MIL-DTL-3655, MIL- DTL-25516, MIL-PRF-31031, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF... MIL-PRF-39012 Connectors, Coaxial, Radio Frequency , General Specification for IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies IPC J-STD-006 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications SAE AS5942 Marking of Electrical Insulating Materials SAE AS23053 Insulation Sleeving, Electrical, Heat Shrinkable, General Specifications For SAE AS22520 Crimping Tools, Wire Termination, General Specification For Material Specifications . Component Specification Cable M17/60-RG142 in accordance with MIL -DTL-17 Connector 1 M39012/16-0014 in accordance with MIL-PRF-39012 Connector 2 M39012/01-0503 in accordance with MIL-PRF-39012 Heat Shrink 1 M23053/5-106-0 in accordance with SAE AS23053 Heat Shrink 2 M23053/5-106-0 in accordance with SAE AS23053 BNC Male to N Male MIL-DTL-17 Cable M17/60- RG142 Coax Fairview Microwave 301 Leora Ln., Suite 100 Lewisville, TX 75056 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Configuration:

  • Connector 1: M39012/16- 0014(BNC Male)
  • Connector 2: M39012/01- 0503(N Male)
  • Cable: M17/60-RG142 Features:
  • Max Frequency 4 GHz
  • 69.5% Phase Velocity
  • Double Shielded
  • FEP Jacket
  • J-STD-Soldering
  • Lot Traceability Data
  • Qualified cable and connectors (QPL)
  • Acceptance Test Report
  • RF Test Data
  • In stock and ready to ship Applications:
  • Hi-Reliability
  • Unmanned Systems
  • Drones
  • MIL-DTL-17 Requirements
  • Military Electronics FMHR0002 DATA SHEET

Solder SN63 in accordance with J- STD-006 Electrical Specifications . Description Min Typ Max Units Frequency Range D C 4 GHz VSWR 1.6:1 Velocity of Propagation 69.5 % Capacitance 29.3 [96.13] pF/ft [pF/m] Dielectric Withstanding Voltage (AC) 1,500 Vr ms Specifications by Frequency . Description F1 F2 F3 F4 F5 Units Frequency 0.1 0.4 1 3 4 GHz Electrical Specification Notes: Insertion Loss does not include the loss of the connectors. Insertion Loss is estimated as 0.1dB per connector. Mechanical Specifications Cable Assembly Description Min Typ Max Units Cable Outer Diameter 0.19 0.1 95 0.2 in Weight 0.2 [9 0.72] lbs [g] Cable Characteristics Component Specification Cable Type M17/60-RG142 Impedance 50 Ohms Inner Conductor Type Solid Inner Conductor Mat. & Plat. Copper Clad Steel, Silver Dielectric Type PTFE Number of Shields 2 Shield Layer 1 Silv er Clad Copper Shield Layer 2 Silv er Clad Copper Outer Conductor Diameter 0.171 in [4.34 mm] Jacket Material FEP 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 2 of 5 FMHR0002 DATA SHEET

Description Connector 1 Connector 2 Type B NC Male N M ale Specification MIL -PRF-39012 MIL -PRF-39012 Impedance 50 Ohms 50 Ohms Contact Mat. & Plat. B rass, Gold B rass, Gold Contact Plating Spec. MIL -G-45204 MIL -G-45204 Dielectric Type T eflon T eflon Body Mat. & Plat. B rass, Silver B rass, Silver Body Plating Spec. QQ- S-365 QQ- S-365 Seal Gasket Material Silicone R ubber Silicone R ubber Contact Gage Spec. 0.210 to 0.230 in 0.210 in min Insulator Gage Spec. 0.208 to 0.228 in Mechanical Specification Notes: Environmental Specifications . Description Specification Temperature Operating Range -55 to +165 deg C Compliance Certifications (see product page for current document) Process Specifications . Process Specification Soldering in accordance with J- STD-001, class 3 Crimping dies in accordance with SAE AS22520 Marking shall meet the adherence requirements of SAE AS5942 Workmanship shall be in accordance with IPC/WHMA-A-620, class 3 Tests and Inspections . Test Sampling Connector Gaging (pin and insulator position) 100% Insertion Loss 100% VSWR 100% Dielectric Withstanding Voltage (DWV) 100% Visual - workmanship, configuration and marking 100% Length C=0, 1.5 AQL Mass C=0, 1.5 AQL Plotted and Other Data Notes:

  • Values at 25°C, sea level. 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 3 of 5 FMHR0002 DATA SHEET

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 4 of 5 How to Order Part Number Configuration: FMHR0002 - xx uu | | cm = Centimeters | <blank> = Inches | Length Example: FMHR0002-12 = 12 inches long cable FMHR0002-100cm = 100 cm long cable Cable Assembly Length Tolerances: BNC Male to N Male MIL-DTL-17 Cable M17/60-RG142 Coax from Fairview Microwave has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link to obtain additional part information: BNC Male to N Male MIL-DTL-17 Cable M17/60-RG142 Coax FMHR0002 URL: https://www.fairviewmicrowave.com/bnc-male-n-male-cable-m17-60-rg142-coax-fmhr0002-p.aspx FMHR0002 DATA SHEET

301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1 Page 5 of 5 *STANDARD TOLERANCES APPLY ONLY TO DIMENSIONS IN INCHES STANDARD TOLERANCES .X ±0.2 .XX ±0.01 .XXX ±0.005 LENGTH MEASURED FROM REF. PLANE TO REF. PLANE M17/60-RG142 M23053/5-106-0 M39012/16-0014 BNC MALE M39012/01-0503 N MALE RP RP CAGE 53919 FAIRVIEW MICROWAVE SN XXXX FMHR0002-XXX D/C WWYY NOTES: 1. BLACK HEAT SHRINK WITH WHITE MARKINGS 3 PLACES. SHEET 3FKR5 CAGE CODEDWG NO SIZE ASCALE N/ACAD FILE NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. TITLE FMHR0002 CN23791 OF 111/15/18 FMHR0002 DATA SHEET BNC Male to N Male MIL-DTL-17 Cable M17/60-RG142 Coax