FMFL1021 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • Passband Bandwidth of 25 MHz
  • High Rejection
  • Cavity filter design
  • Min rejection 70 dB at 0.5 GHz to 3.5 GHz
  • Min rejection 70 dB at 4.5 GHz to 11 GHz
  • Maximum insertion loss of 1.5 dB
  • Female SMA connectors
  • Very high Q factor and high selectivity

Applications

  • Test and Measurement
  • Lab Instrumentation
  • Antenna Systems

Description

The FMFL1021 is a four section band pass filter that is used for filtering for test and measurement, lab instrumentation, and antenna systems has a maximum insertion loss of 1.5 dB. The FMFL1021 has SMA female connectors. Electrical Specifications Description Min Typ Max Units Passband Center Frequency 4 GHz Impedance 50 Ohms Insertion Loss 1 1.5 dB Passband VSWR 1.2:1 1.3:1 Rejection at 3.5 GHz 70 80 dB Rejection at 4.5 GHz 70 80 dB Input Power, CW 50 Watts Input Power, Peak

200 Watts

Electrical Specification Notes: Values at 25°C, sea level. Mechanical Specifications Size Length 2.29 in [58.17 mm] Width 0.47 in [11.94 mm] Height 1.14 in [28.96 mm] Weight 0.125 lbs [56.7 g] Body Material and Plating Aluminum Finish Grey Paint Configuration Number of Sections 4 Connector 1 SMA Female Connector 2 SMA Female

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Bandpass Cavity Filter Operating at 4 GHz with a 25 MHz Passband Bandwidth with SMA Female Connectors FMFL1021 Environmental Specifications Temperature Operating Range -20 to +60 deg C Storage Range -40 to +85 deg C Environment Humidity 100% RH at 35°C, 95% RH at 40°C Shock 20G for 11msec half sine wave, 3 axis both directions Vibration 25g RMS (15 degrees 2KHz) endurance, 1 hour per axis Altitude 30,000 ft. (Epoxy Sealed Controlled Environment) Compliance Certifications (see product page for current document) Plotted and Other Data Notes: Values at 25°C, sea level. Typical Performance Data -10 dB GHz Passband vs. Frequency

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Bandpass Cavity Filter Operating at 4 GHz with a 25 MHz Passband Bandwidth with SMA Female Connectors FMFL1021 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 dB GHz Rejection vs. Frequency -40 -36 -32 -28 -24 -20 -16 -12 dB GHz Return Loss vs. Frequency Input RL Output RL

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Bandpass Cavity Filter Operating at 4 GHz with a 25 MHz Passband Bandwidth with SMA Female Connectors FMFL1021 Bandpass Cavity Filter Operating at 4 GHz with a 25 MHz Passband Bandwidth with SMA Female Connectors from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: Bandpass Cavity Filter Operating at 4 GHz with a 25 MHz Passband Bandwidth with SMA Female Connectors FMFL1021 URL: https://www.fairviewmicrowave.com/bandpass-cavity-filter-4-ghz-sma-female-connectors-fmfl1021-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.

+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: .47 12.0 FL1021 2.28 58.0 2.09 53.0 1.14 29.0 .94 24.0 4X .110±.008 2.80±0.20 THRU 2X SMA FEMALE .57 14.5 .236 6.00 .59 15.0 MAX REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 5/17/2024 KDANG AGANWANI SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMFL1021 A

4 SECTION 4 GHz COAXIAL CAVITY BAND PASS FILTER WITH

INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize

1 OF 1

Bandpass Cavity Filter Operating at 4 GHz with a 25 MHz Passband Bandwidth with SMA Female Connectors