FMCP1184 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Wide frequency coverage
  • Hybrid coupler design
  • 3 dB Attenuation
  • Insertion loss: 3.5 dB Max
  • Isolation: 10 dB Min
  • Amplitude balance: ±1.2 dB
  • Phase balance: ±15°
  • Power handling 20 W (CW)
  • 2.4mm Female Connectorized package

Applications

  • Test and Measurement
  • Wireless Communications
  • Radar Systems
  • Military and Aerospace
  • Signal Distribution Networks
  • Power Combining/Dividing

Description

This 3 dB hybrid coupler is designed for RF and microwave signal distribution applications. 180 Degree 2.4mm Hybrid Coupler from 22 GHz to 45 GHz Rated to 20 Watts. It provides signal splitting and combining with a phase relationship of 180°, insertion loss of 3.5 dB, isolation of 10 dB, amplitude balance of ±1.2 dB, and phase balance of ±15°. The unit is optimized for reliable performance across its specified frequency range and power handling capability. Electrical Specifications Description Min Typ Max Units Frequency Range 22 45 GHz Impedance 50 Ohms Phase Difference 180 Degrees Coupling 3 dB Insertion Loss 3 3.5 dB Isolation 10 13 dB VSWR 1.6:1 1.9:1 Amplitude Balance ±0.8 ±1.2 dB Phase Balance ±10 ±15 Degrees Input Power (CW) 20 Watts Input Power (Peak) 200 Watts 1 µSec PW, 10% Duty Cycle Mechanical Specifications Size Length 1.17 in [29.72 mm] Width 0.95 in [24.13 mm] Height 0.43 in [10.92 mm] Weight 0.09 lbs [40.82 g] Finish Grey Paint Configuration RF Connector Type 2.4mm Female

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2026 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 2.4mm 180 Degree Hybrid Coupler from

22 GHz to 45 GHz Rated to 20 Watts

Environmental Specifications Temperature Operating Range -40 to +85 deg C Storage Range -50 to +105 deg C Humidity 100% RH at 35ºC, 95% RH at 40ºC Shock 20G for 11msec half sine wave, 3 axis both directions Vibration 25gRMS (15 degrees 2KHz) endurance, 1 hour per axis Altitude 30,000 ft. (Epoxy Sealed Controlled environment) Compliance Certifications (see product page for current document) Plotted and Other Data Notes: Typical Performance Data 2.4mm 180 Degree Hybrid Coupler from 22 GHz to 45 GHz Rated to 20 Watts from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 2.4mm 180 Degree Hybrid Coupler from 22 GHz to 45 GHz Rated to 20 Watts FMCP1184 The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.

+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: .47 .94 .08 1.01 25.6 1.17 29.6 2X .098 2.5 4X 2.4mm FEMALE CONNECTOR .43 10.9 .21 5.4 .73 18.6 REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 02/23/2026 HBAKKE SPONG SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMCP1184 A 180 DEGREE 2.4mm HYBRID COUPLER FROM 22 GHz TO 45 GHz RATED TO 20 WATTS HBAKKE SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize

1 OF 1

2.4mm 180 Degree Hybrid Coupler from 22 GHz to 45 GHz Rated to 20 Watts