FMCN1236 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Operating Frequency of 22 GHz Max.
  • Excellent VSWR of 1.25:1
  • Blind Mate Connector
  • Hermetically Sealed
  • Gold Plated Beryllium Copper Contact
  • 51.18µ in. minimum contact plating
  • Low-Engagement Force

Applications

  • General Purpose Test
  • Phased Array Systems
  • Blind Mating
  • RF Backplanes
  • Rack and Panel
  • Base Stations
  • Test I/O

Description

BMA Plug Slide-On Hermetically Sealed Connector Solder Attachment for Pin Cable,, part number FMCN1236, from Fairview Microwave is in-stock and ships same day. This BMA plug connector operates up to a maximum frequency of 22 GHz and offers excellent VSWR of 1.25:1. This blind mate connector is ideal for applications without direct visual or tactile access to the connection point, for example, when two circuit boards need to be mated. Fairview's BMA plug thread-in connector FMCN1236 datasheet specifications and outline drawing are shown in this PDF below. Our extensive offering of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. From providing an I/O for a board design to creating a custom cable assembly configuration, Fairview Microwave has a connector solution to meet your needs. Fairview Microwave also has the expertise to build your custom cable assemblies for you and ship them same-day. Electrical Specifications Description Minimum Typical Maximum Units Frequency Range DC 22 GHz VSWR 1.25:1 Insertion Loss 0.32 dB Operating Voltage (AC) 500 Vrms Dielectric Withstanding Voltage (AC) 1,500 Vrms Insulation Resistance 5,000 MOhms Impedance 50 Ohms Mechanical Specifications Size Length 0.47 in [11.94 mm] Width 0.25 in [6.35 mm] Weight 0.024 lbs [10.89 g] Mating Cycles 1,000 Cycles

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2026 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. BMA Plug (Male) Slide-On Hermetically Sealed Thread-In FMCN1236 Material Specifications Description Material Plating Contact Beryllium Copper Gold 51.18µ in. minimum Insulation PTFE Body Passivated Stainless Steel Gasket Aluminum Alloy Environmental Specifications Temperature Operating Range -65 to +125 deg C Hermetic Seal 1E-8 atm. cm³/s (Helium) using borosilicate glass Compliance Certifications (see product page for current document) Plotted and Other Data Notes: BMA Plug (Male) Slide-On Hermetically Sealed Thread-In from Fairview Microwave is in-stock and available to ship same-day. All of our RF/ microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on- demand. For additional information on this product, please click the following link: BMA Plug (Male) Slide-On Hermetically Sealed Thread-In FMCN1236 URL: https://www.fairviewmicrowave.com/product/rf-connectors/bma-plug-slide-on-connector-fmcn1236.html The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.

+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: .480 12.2 .409 10.4 .449 11.4 .066 1.67 .020 0.5 1/4-36 UNS-2A METAL GASKET REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED B ECO-15214 02/02/2026 AKRESOWSKI SRAUTUS SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMCN1236 B BMA PLUG (MALE) SLIDE-ON HERMETICALLY SEALED THREAD-IN AKRESOWSKI SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE FM DS Rev-D4 Asize

1 OF 2

BMA Plug (Male) Slide-On Hermetically Sealed Thread-In

+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Website: www.FairviewMicrowave.com Website: www.FairviewMicrowave.com THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. 3FKR5 SOLDER PANEL DEFORMATION LESS THAN 25µm MOUNTING PROCEDURE: ASSEMBLE METAL GASKET ONTO CONNECTOR.1. TIGHTEN CONNECTOR TO 24.78 LB-IN [280 Ncm] TORQUE MAX.2. CONNECTION HERMETICITY GUARANTEED AT 1 x 10 ‾⁵ atm·cm³/sec MAX.3. .068 1.7 .038 .15 3.7 MIN .218 5.51/4-36 UNS-2B RECOMMENDED MOUNTING HOLE AKRESOWSKI AKRESOWSKI AKRESOWSKI ITEM NO.CAGE CODE DRAWN BY FMCN1236 B BMA PLUG (MALE) SLIDE-ON HERMETICALLY SEALED THREAD-IN AKRESOWSKI REV A SIZE FM DS SHT 2 Rev-D4 Asize INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 SHEETSCALE NONE 2 OF 2 ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY A A B B C C D D E E F F FMCN1236 CAD Drawing BMA Plug (Male) Slide-On Hermetically Sealed Thread-In