FMAM5116 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

Features

  • GaN High Power Amplifier Design
  • 700 MHz to 2700 MHz Frequency Range
  • Psat 100 Watts typ
  • Gain: 50 dB typ
  • Gain Flatness +/- 2 dB
  • Spurious Supression -60 dBc
  • DC Bias +28VDC @ 13A Current
  • Max RF input Power +10 dBm
  • Enable with TTL Logic Control
  • Current Sense and Temperature Sense features
  • 50 Ohms Input and Output Matched
  • Instantaneous Broadband
  • Built-In control and protection circuits
  • Class AB
  • SMA Female Input/Output Connectors
  • D-Sub Control Connector with Mating Female Connector
  • Operational Temperature -20°C to +60°C
  • Optional Heatsink Available: Model FMAMG5068F

Applications

  • Military Radio
  • Commmunication Systems
  • Broadband Jamming
  • EMC
  • Multioctave High Gain Power Amplifier
  • Band Specific High Power Linear Applications in P/L/S Frequency bands
  • Test and Measurement

Description

The FMAM5116 is a high power amplifier that operates from 700 MHz to 2700 MHz and generates 100 watts of saturated output power. The module utilizes GaN and chip-and-wire technology in the manufacturing process that ensures state-of-the-art power performance with excellent power-to-volume ratio that's ideal for broadband jamming, EMC, and test and measurement applications . This Class AB amplifier is designed for a 50 ohm input/output impedance and offers high efficiency and high linearity, operating over a wide dynamic range with impressive typical performance that includes 50 dB of gain, -60 dBc spurious suppression, and -10 dBc harmonics at 60W. The design has input RF power handling capability up to +10 dBm max without damage, and can handle a load VSWR at Pout of 70W of 3.0:1 for all load phase and amplitude conditions under continuous operation. Typical DC bias requirements include +28V and 13A of current at 80W. The module uses an SMA female connectors at the RF input and output ports. The DC interface incorporates a D-Sub 9 pin male connector for DC bias, Enable with TTL logic control, Current sense, and Temperature sense functions. A mating D-Sub socket connector is included. The rugged amplifier design operates over a wide temperature range from -20°C to +60°C, and can withstand relative humidity exposure up to 95% maximum. An available heatsink with cooling fan (model FMAMG5068F) is recommended to maintain an optimum baseplate temperature during operation. Electrical Specifications (TA = +25°C, DC Voltage = +28Volts, DC Current = 13A) Description Min Typ Max Unit Frequency Range 0.7 2.7 GHz Small Signal Gain 50 dB Gain Flatness ±2 dB Pout at Sat. +60 +100 dBm Harmonics @60 Watts -10 -8 dBc Spurious @60 Watts -60 dBc Impedance (Input) 50 Ohms Impedance (Output) 50 Ohms Input Return Loss -10 dB Operating DC Voltage +24 +28 +32 Volts

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 Electrical Specifications (TA = +25°C, DC Voltage = +28Volts, DC Current = 13A) Description Min Typ Max Unit Operating DC Current * 13 A OFF/ON Switch Time (10% to 90%) ** 2 5 µs Operating Temperature Range -20 +60 °C *@Pout=80W **@ 1 kHz TTL Electrical Specification Notes: Allow for 20% Increased DC Current during initial power-up stage Absolute Maximum Rating Parameter Rating Input RF drive level without damage +10 dBm (Max) Load VSWR @ POUT =70W ∞∞ @ all load phase & amplitude for duration of 1 minute； 3:1 @ all load phase & amplitude continuous Over Temperature 85°C @ heatsink [restored @ 60°C] . ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. . . Mechanical Specifications Size Length 7.08 in [179.83 mm] Width 3.54 in [89.92 mm] Height 0.98 in [24.89 mm] Weight 2 lbs [907.18 g] Input Connector SMA Female Output Connector SMA Female Bias Connector 9-Pin D-Subminiature Male Cooling Baseplate Conduction Environmental Specifications Temperature Operating Range -20 to +60 deg C Storage Range -30 to +75 deg C Humidity 95%

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 Compliance Certifications (see product page for current document) Plotted and Other Data Notes:

  • Values at 25 °C, sea level

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 Amplifier Power-up Precautions 1.) Confirm that proper ESD precautions and controls are always in place before handling any Amplifier module. 2.) Confirm adequate thermal management is in place to effectively dissipate heat away from the Amplifier package. The Amplifier operational baseplate temperature must be within the operational temperature range stated in the Amplifier datasheet. Depending on the design and thermal requirements, using a heatsink with cooling fan is always recommended for safe reliable operation. A heat sink without a cooling fan may also be used. Damage caused from overheating will void the warranty. 3.) Confirm adequate system grounding is established. The DC power supply and Amplifier must have a common ground in order to operate properly. 4.) Power Amplifiers may require additional DC Current when initially powered- up. Depending on the design, the input current draw could range from an additional 10% to 100% above the maximum rated DC current of the Amplifier. This varies based on product part number. 5.) Confirm the DC power supply, if limited, is set to allow for additional start-up current that’s rated for the Power Amplifier. 6.) Confirm the system is designed and calibrated for 50 ohms. Any impedance mismatch may cause performance issues. 7.) Perform a CALIBRATION (if required) with the loads before connecting the Amplifier to the Network Analyzer to ensure proper performance. 8.) Use a fixed attenuator between the signal source and input port of the Amplifier to optimize the input VSWR match. 9.) Confirm the input power level at the input port of the amplifier does not exceed the maximum rated limit for input power (as stated in the Amplifier datasheet). Pin for Small Signal Gain = P1dB-SSG-10 dB Pin for P1dB = P1dB-SSG+1 dB 10.) Confirm the Network Analyzer is always connected to the Amplifier first before DC power is applied to the Amplifier. 11.) As long as the input and output ports of the amplifier are connected to a 50Ohm load and RF signal power is applied, the Amplifier can be powered up with DC voltage. 12.) Confirm the Amplifier output load is matched for a 50 Ohm impedance and will not exceed the maximum rated VSWR or Return Loss limit for the Amplifier. Exceeding the maximum rated VSWR or Return Loss limit will result in reflected signal power that could damage the Amplifier and void the warranty. 13.) Power Amplifier connected to an Antenna for signal transmission - It’s strongly recommended to use a high power fixed attenuator pad or an Isolator between the output port of the Amplifier and input port to the antenna. Any reflected signal power due to impedance mismatch will likely damage the Amplifier and void the warranty. 14.) The attenuator or isolator used at the output port of the Amplifier must be rated to handle the output power level and operational frequency band of the amplifier.

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 Typical Performance Data 44.0 44.8 45.6 46.4 47.2 48.0 48.8 49.6 50.4 51.2 52.0 dBm MHz RF Output Power Output Power(@ -20°C) Output Power after One Hour(@ -20°C) Output Power(@ +60°C) Output Power after One Hour(@ +60°C) 0.0 1.6 3.2 4.8 6.4 8.0 9.6 11.2 12.8 14.4 16.0 A MHz DC Current DC Current(@ -20°C) DC Current after One Hour(@ -20°C) DC Current(@ +60°C) DC Current after One Hour(@ +60°C)

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 4.0 5.8 7.6 9.4 11.2 13.0 14.8 16.6 18.4 20.2 22.0 A MHz DC Current(@ +25°C) 0.0 20.0 40.0 60.0 80.0 100.0 120.0 140.0 160.0 180.0 200.0 Watts MHz RF Output Power(@ +25°C)

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 20.0 26.0 32.0 38.0 44.0 50.0 56.0 62.0 68.0 74.0 80.0 dB MHz POWER GAIN -50.0 -40.0 -30.0 -20.0 -10.0 0.0 10.0 20.0 30.0 40.0 50.0 dB MHz Input Return loss

The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 .50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA FMAM5116 URL: https://www.fairviewmicrowave.com/50-db-gain-high-power-gan-amplifier-at-100-watt-psat-operating-from-700- mhz-to-2.7-ghz-with-sma-fmam5116-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.

+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: 6.77 172 7.09 180 .98 3.23 3.54 4X .165 4.20 THRU YYYYMMDDXXXX FMAM5116 NOTES: 1. ADEQUATE HEATSINK REQUIRED. REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED B ECO-12621 10/31/2023 KGLEBOVA TGALLA D-SUB 9-PIN, MALE PIN # DESCRIPTION SPECIFICATIONS 1,2,3 VDD 28 VDC 4 ENABLE AMPLIFIER ENABLE: TTL LOGIC HIGH (3.3V) (INTERNALLY PULLED-LOW)

5 CURRENT SENSE ANALOG VOLTAGE RELATIVE TO IDD @ 100MV PER AMPERE

6,7,8 GND GROUND

9 TEMP SENSE ANALOG VOLTAGE RELATIVE TO MODULE TEMPERATURE @ 10 MV/°C

ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMAM5116 B 50 dB GAIN, 100 WATT PSAT, 700 MHz TO 2.7 GHz, HIGH POWER GAN AMPLIFIER, SMA, CLASS AB BPUCHASKI SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize

1 OF 1

50 dB Gain High Power GaN Amplifier at 100 Watt Psat Operating from 700 MHz to 2.7 GHz with SMA