FMAD10100 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- VSWR of 2:1
Applications
- General Purpose Test
Description
BNC T adapter female-male-female part number FMAD10100 from Fairview Microwave is in-stock and ships same day. This Fairview BNC T adapter has a female-male-female gender configuration. Our BNC T connector. The Fairview Microwave RF adapter provides good VSWR of 2:1 maximum. RF adapters can be used to enable connections between two connector types that would otherwise not mate. Certain RF adapter configurations can also be used to protect connectors on expensive equipment where the number of connect and disconnect cycles is high. An RF, microwave, or millimeter wave adapter is connected to the equipment and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. Fairview Microwave also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs. Electrical Specifications Description Minimum Typical Maximum Units Impedance 50 Ohms VSWR 2:1 Operating Voltage (AC) 500 Vrms Dielectric Withstanding Voltage (AC) 1,500 Vrms Inner Conductor DC Resistance 1.5 mOhms Outer Conductor DC Resistance 1 mOhms Insulation Resistance 5,000 MOhms Electrical Specification Notes: This adaptor is a non-matched 3db divider for low frequency applications. Mechanical Specifications Size Length 1.28 in [32.51 mm] Width 0.57 in [14.50 mm] Height 1.11 in [28.30 mm] Weight 0.20 lbs [90.72 g]
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. BNC T Adapter Female (Jack) -Male (Plug)- Female (Jack) FMAD10100 Description Connector 1 Connector 2 Polarity Standard Standard Mating Cycles, Min 500 500 Contact Captivation Axial Force, Min 6.1 lbs [2.77 kg] 6.1 lbs [2.77 kg] Coupling Retention, Min 101.2 lbs [45.9 kg] 101.2 lbs [45.9 kg] Material Specifications Connector 1 Connector 2 Description Material Plating Material Plating Type BNC Female BNC Male Contact Phosphor Bronze Copper-Tin-Zinc Alloy Brass Gold over Nickel over Copper Insulation PTFE PTFE Outer Conductor Brass Copper-Tin-Zinc Alloy Brass Copper-Tin-Zinc Alloy Body Brass Copper-Tin-Zinc Alloy Brass Copper-Tin-Zinc Alloy Gasket Silicone Silicone Washer Brass Brass Environmental Specifications Temperature Operating Range -65 to +165 ºC Humidity MIL-STD-202, Method 106 Thermal Shock MIL-STD-202, Method 107, Condition B Salt Spray MIL-STD-202, Method 101, Condition B Compliance Certifications (see product page for current document) Plotted and Other Data BNC T Adapter Female (Jack) -Male (Plug)- Female (Jack) from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: BNC T Adapter Female (Jack) -Male (Plug)- Female (Jack) FMAD10100 URL: https://www.fairviewmicrowave.com/product/rf-adapters/bnc-t-adapter-female-male-female-fmad10100.html The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: 1.28 32.5 1.12 28.4 .90 22.9 2X .372 9.5 .57 14.5 BNC MALE 2X BNC FEMALE REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 04/07/2025 KGLEBOVA AGANWANI SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMAD10100 A BNC T ADAPTER FEMALE TO MALE TO FEMALE, TIN-ZINC- COPPER-ALLOY PLATED BRASS BODY, 50 OHMS KGLEBOVA SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize
1 OF 1
BNC T Adapter Female (Jack) -Male (Plug)- Female (Jack)