FMAD10082 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Gold Plated Brass Contact
Applications
- Enables Between Series Connections • General Purpose Test
Description
BNC male to TNC female adapter part number FMAD10082 from Fairview Microwave is in-stock and ships same day. This Fairview BNC to TNC adapter has a male to female gender configuration in a commercial grade design. FMAD10082 BNC male to TNC female adapter operates to 3.5 GHz. RF adapters can be used to enable connections between two connector types that would otherwise not mate. Certain RF adapter configurations can also be used to protect connectors on expensive equipment where the number of connect and disconnect cycles is high. An RF, microwave, or millimeter wave adapter is connected to the equipment and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. Fairview Microwave also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs. Electrical Specifications Description Minimum Typical Maximum Units Frequency Range DC 3.5 GHz Impedance 50 Ohms Mechanical Specifications Size Length 1.22 in [30.99 mm] Width 0.57 in [14.48 mm] Height 0.57 in [14.48 mm] Weight 0.40 lbs [181.44 g] Description Connector 1 Connector 2 Polarity Standard Standard
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. BNC Male (Plug) to TNC Female (Jack) Adapter, Commercial Grade FMAD10082 Material Specifications Connector 1 Connector 2 Description Material Plating Material Plating Type BNC Male TNC Female Contact Brass Gold Brass Gold Insulation POM POM Outer Conductor Brass Nickel Body Brass Nickel Brass Nickel Coupling Nut Zinc Alloy Nickel Compliance Certifications (see product page for current document) BNC Male (Plug) to TNC Female (Jack) Adapter, Commercial Grade from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: BNC Male (Plug) to TNC Female (Jack) Adapter, Commercial Grade FMAD10082 URL: https://www.fairviewmicrowave.com/product/rf-adapters/bnc-male-to-tnc-female-adapter-fmad10082.html The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: 1.22 .59 .57 14.5 7/16-28 UNEF-2A BNC MALE TNC FEMALE REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 02/11/2025 KGLEBOVA AGANWANI SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMAD10082 A COAXIAL ADAPTER, TNC FEMALE / BNC MALE, COMMERCIAL GRADE KGLEBOVA SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize
1 OF 1
BNC Male (Plug) to TNC Female (Jack) Adapter, Commercial Grade