FMAD10019 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Gold Plated Beryllium Copper Contact
Applications
- General Purpose Test
Description
1.0mm male to 1.0mm female adapter part number FMAD10019 from Fairview Microwave is in-stock and ships same day. This Fairview 1.0mm to 1.0mm adapter has a male to female gender configuration and is built of durable stainless steel in a engineering grade design. FMAD10019 1.0mm male to 1.0mm female adapter operates to 110 GHz. RF adapters can be used to enable connections between two connector types that would otherwise not mate. Certain RF adapter configurations can also be used to protect connectors on expensive equipment where the number of connect and disconnect cycles is high. An RF, microwave, or millimeter wave adapter is connected to the equipment and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. Fairview Microwave also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs. Electrical Specifications Description Minimum Typical Maximum Units Frequency Range DC 110 GHz Impedance 50 Ohms VSWR 1.3:1 Insertion Loss 0.839 dB Operating Voltage (AC) 250 Vrms Dielectric Withstanding Voltage (AC) 500 Vrms Insulation Resistance 5,000 MOhms Mechanical Specifications Size Length 0.26 in [6.71 mm] Width 0.26 in [6.71 mm] Height 0.58 in [14.78 mm] Weight 0.01 lbs [4.54 g] Description Connector 1 Connector 2 Polarity Standard Standard
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 1.0mm Male (Plug) to 1.0mm Female (Jack) Adapter, Engineering Grade FMAD10019 Description Connector 1 Connector 2 Mating Cycles, Min 1,000 1,000 Material Specifications Connector 1 Connector 2 Description Material Plating Material Plating Type 1.0mm Male 1.0mm Female Contact Beryllium Copper Gold Beryllium Copper Gold Outer Conductor Passivated Stainless Steel Passivated Stainless Steel Body Passivated Stainless Steel Passivated Stainless Steel Environmental Specifications Temperature Operating Range -65 to +165 ºC Shock Per MIL-STD-202, Method 213, Test Condition I Vibration Per MIL-STD-202, Method 204, Test Condition D Salt Spray Per MIL-STD-202, Method 101, Test Condition B, Solution 5% Compliance Certifications (see product page for current document) Plotted and Other Data 1.0mm Male (Plug) to 1.0mm Female (Jack) Adapter, Engineering Grade from Fairview Microwave is in-stock and available to ship same- day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 1.0mm Male (Plug) to 1.0mm Female (Jack) Adapter, Engineering Grade FMAD10019 URL: https://www.fairviewmicrowave.com/engineering-grade-1.0mm-male-to-1.0mm-female-adapter-with-passivated- stainless-steel-body-fmad10019-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: .58 14.8 .157 .264 6.7 M4X0.7-6g 7 mm ACROSS FLATS6 mm HEX 1.0 mm FEMALE M4X0.7-6H 1.0 mm MALE REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 07/15/2024 KGLEBOVA AGANWANI SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FMAD10019 A 1.0MM MALE TO 1.0MM FEMALE ADAPTER, ENGINEERING GRADE KGLEBOVA SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize
1 OF 1
1.0mm Male (Plug) to 1.0mm Female (Jack) Adapter, Engineering Grade