FMAD10-06905 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
REV 1.0 Page 1 of 3 Copyright © 2020 TRB T adapter part number FMAD10-06905 from Fairview Microwave is in- stock and ships same day. This Fairview TRB T adapter has a plug-jack- gender configuration. Our TRB T connector. RF adapters can be used to enable connections between two connector types that would otherwise not mate. Certain RF adapter configurations can also be used to protect connectors on expensive equipment where the number of connect and disconnect cycles is high. An RF, microwave, or millimeter wave adapter is connected to the equipment and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. Fairview Microwave also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs. Mechanical Specifications Size Length 1.10 in [27.94 mm] Width 0.57 in [14.48 mm] Height 1.28 in [32.51 mm] Weight 0.05 lbs [24.49 g] Description Connector 1 Connector 2 Type TRB Plug TRB Jack Polarity Standard Standard Interface Specification MIL-STD-1553B MIL-STD-1553B Mechanical Specification Notes: Isolated Material Specifications Description Connector 1 Connector 2 Type TRB Plug TRB Jack Contact Material Beryllium Copper Contact Plating Gold Contact Plating Spec. 30 µin Insulation Material PTFE PTFE Outer Contact Material Beryllium Copper Outer Contact Plating Gold Outer Conductor Contact Spec. 30 µin Body Material Brass Brass Body Plating Nickel Nickel Compliance Certifications (see product page for current document) Plotted and Other Data Notes: Tee Adapter - Two TRB Jacks to One TRB Plug Fairview Microwave 301 Leora Ln., Suite 100 Lewisville, TX 75056 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Configuration:
- TRB Plug Connector 1
- TRB Jack Connector 2
- Tee Body Geometry Features:
- TRB interface meets MIL-STD-1553B
- 30 µin contact plating Applications:
- General Purpose Test FMAD10-06905 DATA SHEET
Tee Adapter - Two TRB Jacks to One TRB Plug from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: Tee Adapter - Two TRB Jacks to One TRB Plug FMAD10-06905 URL: https://www.fairviewmicrowave.com/trb-t-adapter-fmad10-06905-p.aspx 301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.0 Page 2 of 3 FMAD10-06905 DATA SHEET
301 Leora Ln., Suite 100, Lewisville, TX 75056 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.0 Page 3 of 3 Website: www.FairviewMicrowave.com 3FKR5 TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY .44 11.1 1.28 32.5 1.10 27.9 120° TYP. .57 14.5 .38 9.7 REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED A INITIAL RELEASE 8/11/2023 KDANG EKIM ITEM NO. REVCAGE CODE SIZE A OF DRAWN BY FMAD10-06905 A T-Rev.D3
DESCRIPTION
Tee Adapter - Two TRB Jacks to One TRB Plug KDANG THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. SHEETSCALE NONE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 A A B B C C D D E E F F FMAD10-06905 DATA SHEET