FM2500W RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
VOLTAGE 2500 Volts CURRENT 0.15 Ampere RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION
FEATURES
- Low cost * Low leakage * Low forward voltage drop * High current capability MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. FM2500W SMX MAXIMUM RATINGS (At TA = 25 o C unless otherwise noted) Dimensions in inches and (millimeters) NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts. MECHANICAL DATA * Case: Molded plastic * Epoxy: Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 50 o C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) SYMBOL VRRM VDC IO IFSM V RMS Volts Volts Volts Amps0.15 Amps UNITSFM2500W 2500 1750 2500 .209 (5.31) .185 (4.70) .091 (2.31) .067 (1.70) .110 (2.79) .086 (2.18) .011 (0.28) .160 (4.06) .059 (1.50) .035 (0.89) .010 (0.25) .008 (0.20) .067 (1.70) .051 (1.30) ELECTRICAL CHARACTERISTICS (At TA = 25 o C unless otherwise noted) 2004-8 at Rated DC Blocking Voltage CHARACTERISTICS Maximum Full Load Reverse Current Average, Full Cycle V F SYMBOL IR UNITS 2.0 5.0 uAmps Maximum DC Reverse Current Maximum Instantaneous Forward Voltage at 0.15A DC Volts @T A = 25 o C @T A =100 o C 50 .375”, (9.5mm) lead length at TL = 75 o C FM2500W 30 uAmps Typical Junction Capacitance (Note) Operating and Storage Temperature Range C J TJ, TSTG -55 to + 150 pF 0 C Peak Forward Surge Current, 10 ms single half sine-wave superimposed on rated load at 105 o C (JEDEC method) 3.0IFSM Amps
RATING AND CHARACTERISTIC CURVES ( FM2500W ) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD PEAK FORWARD SURGE CURRENT, (A) NUMBER OF CYCLES AT 60Hz 1 10 100 8.3ms Single Half Sine-Wave (JEDEC Method) SURGE CURRENT Single Phase Half Wave 60Hz Inductive or Resistive Load FIG. 1 - TYPICAL FORWARD CURRENT AVERAGE FORWARD CURRENT, (mA) AMBIENT TEMPERATURE, ( ) DERATING CURVE 0 50 100 150 175 150 120 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) TJ = 25 0 20 40 60 80 100 120 140 1.0 0.1 .01