FM200ABXYX MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Catalog 1654769 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 11-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 Product Facts I Multi-pole configurations I Normally open, normally closed and mixed contact arrangements I Optional quick connect tabs for sensing I Small, lightweight & cost- effective – designed to be the smallest, lowest cost contactor in the industry with its current rating I Standard models available with 12VDC, 24VDC and 115 VAC coils. Consult factory for 240VAC coil models. I 1 Form A auxiliary contacts © 2003 and 2007 by Tyco Electronics Corporation. All Rights Reserved. FLATMAN, KILOVAC and TE Logo and Tyco Electronics are trademarks. KILOVAC FM200 (“FLATMAN”) Series 1-, 2- or 3-pole Contactor With Contacts Rated 200 Amps, 480Vac (50/60 Hz. ) or 48Vdc Coil Operating Voltage (valid over temperature range) Coil Designator Units A B C D Nominal Voltage V 12 (DC) 24 (DC) 115 (AC) 24 (DC) Hold Voltage V ≥0.5Vnom ≥0.5Vnom ≥0.5Vnom ≥0.5Vnom Dropout Voltage V ≤0.1Vnom ≤0.1Vnom ≤0.1Vnom ≤0.2Vnom Coil Resistance Data for Pole Configurations (@25°C) Coil Designator Units A B* C* D* Resistance ±10% Ohms X = 36 X = 36 X = 36 Y = 20.8 XX = 18 XX = 18 XX = 18 YY = 10.4 XXX = 12 XXX = 12 XXX = 12 YYY = 6.9 XY = 13.2 XY = 13.2 XY = 13.2 YXY = 8.1 XYX = 9.6 XYX = 9.6 XYX = 9.6 *Coil resistance not measurable at terminals due to converter/economizer circuit. Coil Current/Power Data for Pole Configurations (@25°C, V coil=1.1Vnom) Coil Designator A B Current/Power X = 0.37 ADC / 4.84W X = 0.33ADC / 3.9W XX = 0.73ADC / 9.68W XX = 0.65ADC / 7.6W XXX = 1.1ADC / 14.5W XXX = 0.97ADC / 11.3W XY = 1.0ADC / 13.2W XY = 0.98ADC / 12.7W XYX = 1.38ADC / 18.2W XYX = 1.31ADC / 16.5W Coil Designator C D* Pick-Up I / Duration XYX = 0.161Arms / 16.3VA Average coil current. *Economized. Operate/Release Time (25°C, 0.8V nom ≤V < Vnom) Typ. Operate Time ms 25-50 30-50 50-150 20-30 Release Time ms 10-20 70-80 75-100 75-100 Bounce Time ms 2-5 2-5 2-5 2-5 ****Includes internal coil suppression. Available Pole Configurations and Applicable Coil Codes No. of NC Poles (across) 0 1 2 3 No. of NO Poles (down)

0 Y YY YYY

1 X XY YXY

Coil A/B/C/E Coil A/B/C/E Coil D

2 XX XYX

3 XXX

X = Form X (NO-DM) Y = Form Y (NC-DB) Product Specifications Parameter Units Value for FM200 Series Contact Arrangement 1, 2 or 3 poles Contact Form (per pole) Form X or Y (NO-DM or NC-DB) Rated Operating Voltage V 480Vrms (L-L) or 48VDC Max. Contact Voltage (transient) V 750Vrms or 60VDC Continuous (Carry) Current Arms or ADC 200/pole (Form X) 150/pole (Form Y) Power Switching Form X (0.7-1.0 PF) Cycles 2,000 @ 300Arms 10,000@ 200Arms 20,000 @ 100Arms 5,000 @ 200A/48VDC 2 million @ 50A/28VDC Power Switching Form Y (0.7-1.0 PF) Cycles 2,000 @ 225Arms 10,000@ 150Arms 20,000 @ 75Arms 5,000 @ 150A/48VDC 2 million @ 35A/28VDC Mechanical Life Cycles >2 million Contact Voltage Drop mV 75 for Form X or Form Y Auxiliary Contact Arrangement 1 Form A (SPST-NO) Auxiliary Contact Rating Arms or ADC 1 @ 30VDC, 3 @ 125VAC Dielectric Withstanding Voltage Vrms 2,200 @ sea level Insulation Resistance @ 500VDC Megohms 100 Shock, 11ms 1/2 sine, peak G 10 Vibration, sine, 10-2000Hz. G 5 Operating Temperature °C -20 to +60 Storage Temperature °C -40 to +85 Ambient Humidity %RH 0 to 95 See Outline Dimensions for model-specific weight information. For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055.File E208033

Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 KILOVAC FM200 Series (FLATMAN) (Continued)

200 Amp, 480Vac or 48Vdc Contactor

with 1, 2 or Poles MAIN TERMINAL WIRE CONNECT VIA M8 BOLT W/LOCK/FLAT 13MM (0.5 IN) HEX HEAD3.77 (95.8) 1.22 (31.0) C A B 3.77 (95.8) 3.42 (86.9) 2.74 (69.6) 2.98 (75.7) .256 DIA. (6.5) RIGHT ANGLE SCREW TERMINAL STRIP ACCEPTS #24 - #14 WIRE 4.2 (106.7) 2.29 (58.2) 1.93 (49.0) 2.29 (58.2) 1.86 (47.2) .40 (10.2) OPTIONAL TAB TERMINALS .250 x .032 (6.35 x .813) NUMBER OF POLESDIM. A B C 123 1.68 (42.7) 2.67 (67.7) 3.65 (92.7) 2.14 (54.3) 3.12 (79.3) 4.11 (104.4) 1.56 (39.6) 2.55 (64.6) 3.53 (89.7) WEIGHT 17.6 oz. (0.5 kg) 35.3 oz. (1.0 kg) 49.4 oz. (1.4 kg) Outline Dimensions Part Numbering System Typical Part Number FM200 A B XYX Series: FM200 = Multipole, 200 Amp, 480VAC/48VDC Contactor Control Voltage: A = 12VDC Coil, No Suppression B = 24VDC Converter, with Suppression C = 115VAC Converter, with Suppression D = 24VDC Electronic Chopper, with Suppression E = 240VAC Converter, with Suppression - Consult Factory for Availability and Specifications Optional Termination: A = Optional Quick Connect Tabs B = No Optional Terminals Pole Configuration (All models have a 1 Form A (SPST-NO) auxiliary switch): X = 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E XX = 2 Form X (2PST-NO-DM), Available with control voltage codes A, B, C and E XXX = 3 Form X (3PST-NO-DM), Available with control voltage codes A, B, C and E Y = 1 Form Y (SPST-NC-DB), Available only with control voltage code D YY = 2 Form Y (DPST-NC-DB), Available only with control voltage code D YYY = 3 Form Y (3PST-NC-DB), Available only with control voltage code D XY = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available with control voltage codes A, B, C and E XYX = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E YXY = 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available only with control voltage code D For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. 1654769 – 0M – KRG – PDF – 11-07 Printed in U.S.A.