FM1017-10 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Launch Pin & Dielectric for 0.91mm (0.036 Inch) Field Replaceable Connector, 6.02mm (0.237 Inch) Pin Length FM1017-10
Applications
- General Purpose Test
- Rack and Panel Mount Applications
- Used in Field Replaceable Connectors
- Allows for Replacement of Damaged Connectors
Description
Fairview Microwave's FM1017-10 Launch pin & dielectric for 0.91mm (.036inch) field replaceable connector, 6.02mm (0.237inch) pin length is part of our complete line of Connector Launch Accessories available for same-day shipping. This range of accessories includes Glass bead Transitions, Launch Pin & Dielectric Transitions and Pin/Tab Transitions to Microstrip and Stripline Circuits in conjunction with our line of field replaceable flange connectors. These accessories are designed to be compatible with our line of Field Replaceable Connectors to ensure and .036” and in a variety of lengths and sizes depending on the application. Our FM1017-10 Launch pin & dielectric for 0.91mm (.036inch) field replaceable connector, 6.02mm (0.237inch) pin length datasheet specifications are shown below in this PDF. Fairview Microwave’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Fairview Microwave has the right connector for the job. Fairview Microwave can also expertly build your custom cable assemblies for you and ship same day. Mechanical Specifications Dimensions Pin Length 0.237 in [6.02 mm] Pin Diameter 0.036 in [0.91 mm] Tab Length 0.05 in [1.27 mm] Tab Diameter 0.01 in [0.25 mm] Dielectric Length 0.187 in [4.75 mm] Dielectric Diameter 0.117 in [2.97 mm] Dielectric Material Teflon Weight 0.347 lbs [157.4 g] Compliance Certifications (see product page for current document) Plotted and Other Data Notes:
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Launch Pin & Dielectric for 0.91mm (0.036 Inch) Field Replaceable Connector, 6.02mm (0.237 Inch) Pin Length FM1017-10 Launch Pin & Dielectric for 0.91mm (0.036 Inch) Field Replaceable Connector, 6.02mm (0.237 Inch) Pin Length from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: Launch Pin & Dielectric for 0.91mm (0.036 Inch) Field Replaceable Connector, 6.02mm (0.237 Inch) Pin Length FM1017-10 fm1017-10-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2025 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.FairviewMicrowave.com 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: .237±.003 6.02±0.08 .020±.002 0.51±0.05 .050±.002 1.27±0.05 .307 7.80 .036±.002 0.91±0.05 .020±.002 0.51±0.05 .010±.001 0.25±0.03 .036+ .002 .000 0.91+ 0.05 0.00 .117±.002 2.97±0.05 .187±.002 4.75±0.05 NOTES: FINISH (PLATING THICKNESS IN MICRO-INCHES)1. BERYLLIUM COPPER.• GOLD PL. 4 MIN. OVER NICKEL-PHOSPHORUS ALLOY PL. 80 MIN. • OVER COPPER PL. 20MIN. REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED B ECO-13446 10/07/2024 DMAY SRAUTUS SHEETSCALE ITEM NO. REVCAGE CODE SIZE A DRAWN BY FM1017-10 B LAUNCH PIN & DIELECTRIC FOR 0.91MM (.036INCH) FIELD REPLACEABLE CONNECTOR K.DANG SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE A A B B C C D D E E F F FM DS Rev-D4 Asize
1 OF 1
Launch Pin & Dielectric for 0.91mm (0.036 Inch) Field Replaceable Connector, 6.02mm (0.237 Inch) Pin Length