1AC-II FLUKE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
The pocket-sized voltage detector The next generation VoltAlert™ ac voltage testers from Fluke are easy to use—just touch the tip to a terminal strip, outlet, or cord. When the tip glows red and the unit beeps, you know there’s voltage in the line. Electricians, mainte- nance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.
- T he 1AC-II continually tests its battery and its circuit integrity with a periodic double flash visual indication using Fluke Voltbeat™ technology.
- T he VoltAlert ™ Tester (1AC-II and 1LAC-II) is a Category IV —1000 V overvoltage rated product for added user protection, the highest rated of its kind.
- V oltage detection of 90 V to 1000 V ac or 200 V to 1000 V ac depending on model, as well as a 24 V to 1000 V ac control circuit model.
- I t is rugged, reliable, and has a two-year warranty. Technical Data USC Specifications Operating principle Senses the steady state elec- trostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Note: Does not respond to random electrostatic discharge. Voltage sensing ranges Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to
405 Hz; also a 20 V to 90 V
Blade or round, depending on model Light source One high intensity red LED Agency approvals/listings c CSA us, CE, C-Tick Safety rating
1000 V, CAT IV
-10 °C to 50 °C Operating humidity ranges 0 % to 95 % (0 °C to 30 °C) 0 % to 75 % (30 °C to 40 °C) 0 % to 45 % (40 °C to 55 °C) Operating altitude 3000 meters Batteries
2 AAA alkaline batteries
and regulations for: Safety Europe and ROW: Low voltage directive and related stan- dards as: EN61010 respectively IEC61010 for international requirements EMC Europe and ROW: EMC direc- tive and related standards as: EN61326 respectively IEC61326 and their subset for ESD. Not all EMC standards are neces- sary due to no contact to mains voltage. Environmental Especially in European markets with relations to WEEE and RoHs directive for the used ma- terials and information in the user documetation (manual)
Ordering Information
Fluke-1AC-A1-II ACV Detector 90-1000V, ENGL/LASPN/CFR Part Number 2432932 F luke-1AC-A2-II ACV Detector 90-1000V, BRPORT/JAP/CHIN-T Part # 2432944 F luke-1AC-E1-II ACV Detector 200-1000V, ENGL/GER/FREN/DUTCH Part # 2432967 Fluke-1AC-E2-II ACV Detector 200-1000V, DANSH/NORW/SWED Part # 2432971 F luke-1AC-P1-II ACV Detector 200-1000V, KOR/THAI/SPANISH Part #2433000 F luke-1LAC-A-II Low Voltage Detector 20-90 VAC AMERICAS PACIFIC Part # 2433021 F LK-1AC-A1-II-5PK Volt Alert, 5 Pack For USA Part # 2433042 F LK-1AC-E1-II-5PK Volt Alert, 5 Pack For EUROPE Part # 2433056 Americas version European version Low volt version Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands Fluke. Keeping your world up and running For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com ©2005-2009 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 8/2009 2513868B D-US-N Modification of this document is not permitted without written permission from Fluke Corporation.