FLT007A0 LINEAGEPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
Compliant to RoHS EU Directive 2002/95/EC (Z versions) Compatible in a Pb-free or SnPb reflow environment (Z versions) Surface Mount and Through hole versions Common-mode and Differential-mode filtering Small size and low profile 25.4 mm x 25.4 mm x 12.2 mm (1 x 1 x 0.48 in) Same footprint as FLTR75V5 module Cost efficient open frame design Wide operating temperature range (-40°C to +85°C) Meets the voltage isolation requirements for ETSI 300-132-2 and complies with and is licensed for Basic Insulation rating per EN60950-1 UL* 60950-1 Recognized, CSA† C22.2 No. 60950-1-
03 Certified, and VDE‡ 0805:2001-12 (EN60950-1)
CE mark meets 73/23/EEC and 93/68/EEC directives§ ISO** 9001 and ISO 14001 certified manufacturing facilities
Description
The FLT007A0 filter module is designed to operate over an input voltage range up to 75Vdc at output currents up to 7A in an ambient temperature of -40ºC to 85ºC. The filter module is optimized for use with dc/dc converter modules, to significantly reduce the conducted differential and comm on-mode noise returned to the power source. This filter module enables designers to meet the requirements of EMI standards CISPR 22 (EN55022) and FCC Class B by insertion in-line between the power source and the dc/dc converter module. These modules are designed and manufactured to be either surface mounted (-SR version) or through hole mounted on PCBs. RoHS Compliant
March 26, 2008 FLT007A0/FLT007A0-SR Input Filter Modules 75Vdc Input Voltage Maximum, 7A Output Current Maximum LINEAGE POWER 2 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All V IN 0 100 Vdc Operating Ambient Temperature All T A -40 85 °C (see Thermal Considerations section) Storage Temperature All T stg -55 125 °C I/O to Ground Isolation All − − 2250 Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V IN 0 24/48 75 Vdc Maximum Input-to-Output Current (VIN= 0 to ViN,max) All I max 7 Adc Resistance per leg All R 25 mΩ CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 10 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.
March 26, 2008 FLT007A0/FLT007A0-SR Input Filter Modules 75Vdc Input Voltage Maximum, 7A Output Current Maximum LINEAGE POWER 3 Insertion Loss Tables Parameter Device Symbol Min Typ Max Unit Common-mode Insertion Loss 50Ω circuit, 500kHz All 44 50 dB 50Ω circuit, 1MHz All 54 60 dB 50Ω circuit, 10MHz All 44 50 dB Differential-mode Insertion Loss 50Ω circuit, 500kHz All 44 50 dB 50Ω circuit, 1MHz All 60 66 dB 50Ω circuit, 10MHz All 40 46 dB General Specifications Parameter Min Typ Max Unit Calculated MTBF (VIN= VIN, nom, IO= 0.8IO, max, TA=40°C) Telecordia SR 332 Issue 1: Method 1, case 3 22,576,100 Hours Weight ⎯ 7.8 (0.275) ⎯ g (oz.)
with both Pb and Pb-free wave soldering processes. representative for more details. number and location of manufacture. allowable component spacing, is 8 mm max. Figure 12. Pick and Place Location.
Figure 13. Reflow Profile for Tin/Lead (Sn/Pb) Figure 14. Time Limit Curve Above 205oC Reflow for Tin Lead (Sn/Pb) process. suggested Pb-free solder paste is Sn/Ag/Cu (SAC). Sn/Ag/Cu solder is shown in Figure. 15. varies according to the MSL rating (see J-STD-033A).
15 Seconds
60 Seconds
Figure 15. Recommended linear reflow profile
March 26, 2008 FLT007A0/FLT007A0-SR Input Filter Modules 75Vdc Input Voltage Maximum, 7A Output Current Maximum LINEAGE POWER 10 Mechanical Outline Dimensions are in millimeters and [inches]. * - May be either + or – polarity, but must be same for pin 1 and 4. ** - Pin 2 and 5 shall be polarity that is opposite from pins 1 and 4. FLT007A0 (Through Hole Version) Bottom View Side View FLT007A0-SR (SMT Version) Bottom View Side View
March 26, 2008 FLT007A0/FLT007A0-SR Input Filter Modules 75Vdc Input Voltage Maximum, 7A Output Current Maximum LINEAGE POWER 11 Recommended Pad Layout Dimensions are in millimeters and [inches]. FLT007A0 (Through Hole Version) FLT007A0-SR (SMT Version) * - May be either + or – polarity, but must be same for pin 1 and 4. ** - Pin 2 and 5 shall be polarity that is opposite from pins 1 and 4.
March 26, 2008 FLT007A0/FLT007A0-SR Input Filter Modules 75Vdc Input Voltage Maximum, 7A Output Current Maximum Document No:DS05-028 ver 1.23 PDF name: FLT007A0_FLT007A0-SR_ds.pdf
Ordering Information
Please contact your Lineage Power Sales Representative for pricing, availability and optional features. Table 1. Device Codes
3000 Skyline Drive, Mesquite, TX 75149, USA
application. No rights under any patent accompany the sale of any such product(s) or information. © 2008 Lineage Power Corporation, (Mesquite, Texas) All International Rights Reserved.