FP7001A OMEGA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Output for Flow— No Amplifier Needed U 10mV/°C Analog Temperature Output The OMEGA® FP7001A paddlewheel flow and temperature sensor is ideal for accurate monitoring of typical industrial water flows, hard-to- handle corrosive aqueous solutions, and high purity fluids (see “Wetted Materials” for details). The FP7001A utilizes a paddlewheel-like rotor whose motion is converted into a high-level square wave pulse output by an open collector Hall effect sensor. Pulse amplitudes from 5 to
18 V are possible, depending on
input power. The FPW-15 120 Vac converter plugs directly into a wall socket and outputs a regulated 15 Vdc at 400 mA. FLOW PIPE TEE PADDLEWHEEL SENSOR BUILT-IN TEMPERATURE SENSOR LOCKNUT ARTWORK/PRODUCT ART/FLOW/F-PADDLEWHEEL SENS FP7001A, with FP7010, installation fitting, shown smaller than actual size. Free Built-In Temperature Sensor with analog output! F-21 The DPF700 Series panel meter supplies power for the flow sensor and provides rate indication, or totalization and batch control (when ordered with the dual relay option). When ordered with the analog output option, the DPF700 can be used to interface the FP7001A flow signal to such items as strip chart recorders, dataloggers, and computer interfaces. The system consists of the flow sensor, an installing fitting, and the electronics. The PVC tee fittings are supplied with a PVC locking nut, and the galvanized iron tee fittings are supplied with a brass locking nut to provide secure metal-to-metal mounting to the threaded brass insert. The FP7001A is not compatible with FP-5300 or FMG-5300 Series installation fittings. When powered by the FPW-5 five Vdc wall socket converter, the FP7001A has a TTL level pulse output which can be used with a variety of pulse input flow indicators, signal conditioners and controllers. It is not compatible with the FPM 5500/5740.
F SPECiFiCATiONS Accuracy: ±2% of full scale Repeatability: ±1% of full scale Power: 5 to 18 Vdc @ 10 mA maximum Wetted Materials: FP7001A sensor: polypropylene body, PVDF paddle, FKM O-ring, 316SS shaft. Galvanized iron tee includes brass insert and locking nut. PVC tee has PVC insert and locking nut. Fluid Temperature/Pressure Range: Do not exceed the maximum ratings of your piping. Depending on the material of the fitting, the operating temperature/ pressure may be limited by your piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) 30 psig @ 60°C (140°F), due to the insert in the tee. FP7001A sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max. pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a maximum temperature of 93°C (200°F) at 18 psig maximum Frequency Output: Nominal 1 Hz/fps. amplitude of open collector pulse = Vdc input power Cable Length: 2.4 m (8') Weight: FP7001A: 0.2 kg ( 1⁄2 lb) Maximum Viscosity: 5 cps Temperature Sensor Specifications Range: 2 to 150°C (36 to 302°F) Accuracy: ±1°C Output: 10 mV/°C Power: 5 to 18 Vdc To purchase a complete system, order: 1) Flow Sensor 2) Installation Fitting 3) Electronics Ordering Example: FP7001A sensor (polypropylene body/316SS shaft), FP7012 PVC installation fitting, and DPF701 panel meter. Required installation Fittings (includes Locking Nut) DPF700 Series compatible indicators, for flowrate, total or batch control, (sold separately); iSeries indicators for temperature measurement (sold separately). PVC, Schedule 40 Galvanized iron Tee Model Lay Length K Pipe Size K Range No. meters (inch) Factor Model No. NPT Factor (GPM) FP7007 0.53 (21) 108.78 FP7007-Gi 3⁄4 159.85 2 to 30 FP7010 0.66 (26) 70.53 FP7010-Gi 1 82.94 3 to 50 FP7012 0.79 (31.25) 41.16 FP7012-Gi 11⁄4 48.81 5 to 90 FP7015 0.95 (37.5) 29.46 FP7015-Gi 11⁄2 35.52 7 to 125 FP7020 1.27 (50) 15.52 FP7020-Gi 2 20.62 11 to 205 FP7025 1.59 (62.5) 11.40 FP7025-Gi 21⁄2 12.44 15 to 285 FP7030 1.91 (75) 6.64 FP7030-Gi 3 7.22 25 to 460 Each transmitter/fitting system comes factory calibrated with operator’s manual. Note: Your transmitter and fitting must be ordered as a system; see examples below. FP7001A plus FP7010-GI, sensor with 3 to 50 iron tee GPM fitting. Available with PVC or galvanized iron fittings. Please see required installation fittings table below. meaSureS BoTh Flow & TemPeraTure! Free Built-In Temperature Sensor with analog output! FP7001A, with FP7010-Gi shown smaller than actual size. To Order Model No. Description FP7001A Polypropylene body/316SS shaft with temp sensor FLSC-100 Transmitter module for FP7001A FPW-15 15 Vdc power supply