FL05-0002-G MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Small Size and Low Profile
- Industry Standard SOIC-8 SMT Plastic Package
- Superior Repeatability
- Typical Insertion Loss 0.5 dB
- Typical Rejection 20dB
- 2 Watt Power Handling
Description
M/A- COM’s FL05-0002-G is an IC-based monolithic high pass filter in a low cost SOIC-8 plastic package. This filter is ideally suited for applications where small size, low cost and low loss are required. Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. The FL05-0002-G is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Low Cost SMT High Pass Filter 1700-3000 MHz FL05-0002-G SO-8 Typical Electrical Specifications1, TA = +25°C Parameter Units Min Typ Max Insertion Loss:1700-3000MHz dB — 0.5 1.0 VSWR: 1700 - 3000 MHz 1.5:1 1.8:1 Rejection: DC-1000MHz dB 15 20 — 1. All specifications apply with a 50-Ohm source and load impedance. * If specific reel size is required, consult factory for part number assignment.
Ordering Information
FL05-0002-G SOIC 8-Lead Plastic Package FL05-0002-G-TR Forward Tape and Reel* FL05-0002-G-RTR Reverse Tape and Reel*
Low Cost SMT High Pass Filter 1700-3000MHz FL05-0002-G M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S1511A V1.00 1. Exceeding these limits may cause permanent damage. Absolute Maximum Ratings1 Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Functional Diagram VSWR vs Frequency Insertion Loss vs Frequency -30.0 -25.0 -20.0 -15.0 -10.0 -5.0 0.0 Frequency (MHz) dB Typical Performance @ +25°C 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (MHz) All unused pins must be RF and DC grounded. Pins 1 and 4 are thermal ground contacts.