FEP16AT FAIRCHILD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Low forward voltage drop.
- High surge current capacity.
- High current capability.
- High reliability. Parameter Device Units 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT Peak Repetitive Reverse Voltage 50 100 150 200 300 400 500 600 V Maximum RMS Voltage 35 70 105 140 210 280 350 420 V DC Blocking Voltage (Rated VR ) 50 100 150 200 300 400 500 600 V Maximum Reverse Current @ rated VR TA = 25°C TA = 100°C 500 µ A µ A Maximum Reverse Recovery Time I F = 0.5 A, IR = 1.0 A, IRR = 0.25 A 35 50 nS Maximum Forward Voltage @ 8.0A 0.95 1.3 1.5 V Typical Junction Capacitance VR = 4.0. f = 1.0 MHz 85 60 pF Symbol Parameter Value Units IO Average Rectified Current .375 " lead length @ TA = 100°C 16 A if(surge) Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) 200 A PD Total Device Dissipation Derate above 25°C 8.33 W mW/ °C R θJA Thermal Resistance, Junction to Ambient 15 °C/W R θJL Thermal Resistance, Junction to Lead 2.2 °C/W Tstg Storage Temperature Range -65 to +150 °C TJ Operating Junction Temperature -65 to +150 °C TO-220AB 1 2 3 0.412(10.5) MAX 0.103(2.62) 0.113(2.87) 0.14(3.56) 0.16(4.06) 0.587(14.9) 0.594(15.1) 0.53(13.46) 0.56(14.22) 0.027(0.68) 0.037(0.94) 0.095(2.41) 0.105(2.67) 0.148(3.74) 0.154(3.91) Dimensions are in: inches (mm) 0.014(0.35) 0.025(0.64) 0.10(2.54) 0.11(2.79) 0.23(5.84) 0.27(6.86) 0.045(1.14) 0.055(1.40) 0.175(4.44) 0.185(4.70) PIN 1 CASE PIN 3 Positive CT PIN 2 PIN 1 CASE PIN 3 Negative CT Suffix “A” PIN 2 PIN 1 CASE AC PIN 3 Doubler Suffix “D” PIN 2 Discrete POWER & Signal Technologies
FEP16AT - FEP16JT, Rev. A Typical Characteristics Pulse Generator (Note 2) 50 Ω NONINDUCTIVE 50 Ω NONINDUCTIVE DUT (-) (+) OSCILLOSCOPE (Note 1) 50 Ω NONINDUCTIVE 50V (approx) Reverse Recovery Time Characterstic and Test Circuit Diagram 1.0cm SET TIME BASE FOR trr +0.5A -0.25A -1.0A 5/ 10 ns/ cm Forward Current Derating Curve 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) FORWARD CURRENT (A) º SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS Reverse Characteristics 0 20 40 60 80 100 120 140 0.1 100 1000 PERCENT OF RATED PEAK REVERSE VOLT AGE (%) REVERSE CURRENT ( A) µ T = 25 C ºA T = 100 C ºA Non-Repetitive Surge Current 12 5 1 0 2 0 5 0 1 0 0 120 160 200 NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT (A) Forward Characteristics 0.01 0.1 100 FORWARD VOLTAGE (V) FORWARD CURRENT (A) Pulse Width = 300µs 2% Duty Cycle T = 25 C ºA FEP16A T-FEP16DT FEP16FT-FEP16JT Junction Capacitance 1 2 5 10 20 50 100 100 REVERSE VOLTAGE (V) CAPACITANCE (pF) FEP16FT-FEP16JT FEP16AT-FEP16DT
ACEx™ CoolFET™ CROSSVO LT™ E 2CMOS TM FACT™ FACT Quiet Series™ FAST ® FAS Tr™ G TO™ HiSeC™ The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPO RT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPRO VAL OF FAIRCHILD SEMICONDUC TOR CORPOR ATION. As used herein: ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT S TATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Formative or In Design First Production Full Production Not In Production DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILIT Y, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.