FED60W

FED60W_14 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1 www.PDUKE.com 2014/04/30 FED60W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 60Watts FEATURES APPLICATIONS

• NO MINIMUM LOAD REQUIRED
• 1600VDC INPUT TO OUTPUT ISOLATION
• STANDARD 2.00 X 1.00 X 0.40 INCH
• SIX-SIDED CONTINUOUS SHIELD
• SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1, & EN50155
• CE MARKED
• COMPLIANT TO RoHS II & REACH
• WIRELESS NETWORK
• TELECOM/DATACOM
• INDUSTRY CONTROL SYSTEM
• DISTRIBUTED POWER ARCHITECTURES
• SEMICONDUCTOR EQUIPMENT 1600VDC ISOLATION REMOTE CONTROL UVP OCP SCP OVP OTP LOW STANDBY POWER TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 ℃ otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) Model Number VDC VDC A mA % µF FED60-24S3P3W 9 ~ 36 3.3 12 10 90 32000 FED60-24S05W 9 ~ 36 5 12 10 92 30000 FED60-24S12W 9 ~ 36 12 5 10 92 5850 FED60-24S15W 9 ~ 36 15 4 10 92 3900 FED60-24S24W 9 ~ 36 24 2.5 10 92 2000 FED60-24D12W 9 ~ 36 ±12 ±2.5 10 91 ±3900 FED60-24D15W 9 ~ 36 ±15 ±2 10 91 ±2400 FED60-24D24W 9 ~ 36 ±24 ±1.25 10 91 ±1000 FED60-48S3P3W 18 ~ 75 3.3 12 10 90 32000 FED60-48S05W 18 ~ 75 5 12 10 92 30000 FED60-48S12W 18 ~ 75 12 5 10 92 5850 FED60-48S15W 18 ~ 75 15 4 10 92 3900 FED60-48S24W 18 ~ 75 24 2.5 10 91 2000 FED60-48D12W 18 ~ 75 ±12 ±2.5 10 91 ±3900 FED60-48D15W 18 ~ 75 ±15 ±2 10 91 ±2400 FED60-48D24W 18 ~ 75 ±24 ±1.25 10 91 ±1000 PART NUMBER STRUCTURE FED60 - 48 S 05 W - N HS Series Name Input Voltage (VDC) Output Quantity Output Voltage (VDC) Input Range Remote Control options Heat-sink S: Single 3P3: 05: 12: 15: 24: 3.3 24: 48: 9~36 18~75 Dual 12: 15: 24: ±12 ±15 ±24 4:1 /filetall/filetall /filetall/filetall: Positive logic Negative logig /filetall/filetall /filetall/filetall: HS HC No Heat-sink Heat-sink Heat-sink with Clamp

2 www.PDUKE.com 2014/04/30 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 24Vin(nom) 48Vin(nom)

75 VDC

Start-up voltage 24Vin(nom) 48Vin(nom)

18 VDC

24Vin(nom) 48Vin(nom) VDC Start up time Constant resistive load Power up Remote ON/OFF 60 60 ms Input surge voltage 1 second, max. 24Vin(nom) 48Vin(nom) 50

100 VDC

(Standard) DC-DC ON DC-DC OFF Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Referred to –Vin pin Negative logic (Option) DC-DC ON DC-DC OFF Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC Remote ON/OFF Input current of Ctrl pin -0.5 0.5 mA Remote off input current 3 mA OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -1.0 +1.0 % Line regulation Low Line to High Line at Full Load -0.2 +0.2 % Load regulation No Load to Full Load Single Dual -0.5 -1.0 +0.5 +1.0 % Cross regulation Asymmetrical load 25%/100% FL Dual -5.0 +5.0 % Voltage adjustability Single output 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout -10 -10 +10 +20 % Ripple and noise Measured by 20MHz bandwidth With a 10 µF/25V X7R MLCC With a 10 µF/25V X7R MLCC With a 4.7 µF/50V X7R MLCC 3.3Vout, 5Vout 12Vout, 15Vout 24Vout 100 150 100 125 200 mVp-p Temperature coefficient -0.02 +0.02 %/ ℃ Transient response recovery time 25% load step change 250 µs Over voltage protection Zener diode clamp 3.3Vout 5Vout 12Vout 15Vout 24Vout 3.9 6.2 VDC Over load protection % of Iout rated; Hiccup mode 150 % Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Input to Output Input (Output) to Case 1600 1600 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance 2200 pF Switching frequency 225 250 275 kHz Safety meets UL60950-1, EN60950-1, IEC60950-1 Case material Copper Base material FR4 PCB Potting material Silicone (UL94 V-0) Weight 33g (1.16oz) MTBF MIL-HDBK-217F, Full load. 8.582 x 10 5 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature With Derating -40 +105 ℃ Maximum case temperature +105 ℃ Over temperature protection +115 ℃ Storage temperature range -55 +125 ℃ Thermal impedance Vertical direction by natural con vection (20LFM) Without Heat-sink With Heat-sink 10.8 10.3 ℃ /W Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions Level EMI (2) EN55022 Class A ESD EN61000-4-2 Air ± 8kV and Contact ± 6kV Perf. C riteria A

3 www.PDUKE.com 2014/04/30 Radiated immunity EN61000-4-3 20 V/m Perf. Criteria A Fast transient (3) EN61000-4-4 ± 2kV Perf. Criteria A Surge (3) EN61000-4-5 ± 2kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Note: 1. Test by minimum input and constant resistive load. 2. The standard module meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. The external input components are required if the module has to meet EN61000-4-4, EN61000-4-5. The FED60-24 /filetall/filetall/filetallW recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ58A, 58V, 3000Watt peak pulse power) to connect in parallel. The FED60-48 /filetall/filetall/filetallW recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ120A, 120V, 3000Watt peak pulse power) to connect in parallel. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FED60-48S12W Derating Curve FED60-48S12W Derating C urve with Heat-sink FED60-48S12W Efficiency VS Input Voltage FED60-48S1 2W Efficiency VS Output Load MECHANICAL DRAWING

4 www.PDUKE.com 2014/04/30 EXTERNAL OUTPUT TRIMMING 1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) PIN CONNECTION PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin

3 Ctrl Ctrl

6 Trim -Vout

Output can be externally trimmed by using the method shown below. TRIM UP RU TRIM DOWN RD