FED40-24D24

FED40_14 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1 www.PDUKE.com 2014/4/30 FED40 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 40 Watts FEATURES APPLICATIONS

• NO MINIMUM LOAD REQUIRED
• 1600VDC INPUT TO OUTPUT ISOLATION
• STANDARD 2.00 X 1.00 X 0.40 INCH
• SIX-SIDED CONTINUOUS SHIELD
• SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1, & EN50155
• CE MARKED
• COMPLIANT TO RoHS II & REACH
• WIRELESS NETWORK
• TELECOM/DATACOM
• INDUSTRY CONTROL SYSTEM
• DISTRIBUTED POWER ARCHITECTURES
• SEMICONDUCTOR EQUIPMENT 1600VDC ISOLATION REMOTE CONTROL UVP OCP SCP OVP OTP LOW STANDBY POWER TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 otherwise noted℃ Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) Model Number VDC VDC mA mA % µF FED40-12S3P3 9 ~ 18 3.3 10000 20 90 26600 FED40-12S05 9 ~ 18 5 8000 20 91 20000 FED40-12S12 9 ~ 18 12 3333 20 91 3900 FED40-12S15 9 ~ 18 15 2666 20 91 2600 FED40-12S24 9 ~ 18 24 1666 20 91 1300 FED40-12D12 9 ~ 18 ±12 ±1666 20 90 ± 2600 FED40-12D15 9 ~ 18 ±15 ±1333 20 91 ± 1600 FED40-12D24 9 ~ 18 ±24 ±833 20 91 ±650 FED40-24S3P3 18 ~ 36 3.3 10000 15 91 26600 FED40-24S05 18 ~ 36 5 8000 15 92 20000 FED40-24S12 18 ~ 36 12 3333 15 92 3900 FED40-24S15 18 ~ 36 15 2666 15 92 2600 FED40-24S24 18 ~ 36 24 1666 15 91 1300 FED40-24D12 18 ~ 36 ±12 ±1666 15 90 ± 2600 FED40-24D15 18 ~ 36 ±15 ±1333 15 91 ± 1600 FED40-24D24 18 ~ 36 ±24 ±833 15 91 ±650 FED40-48S3P3 36 ~ 75 3.3 10000 10 91 26600 FED40-48S05 36 ~ 75 5 8000 10 92 20000 FED40-48S12 36 ~ 75 12 3333 10 92 3900 FED40-48S15 36 ~ 75 15 2666 10 92 2600 FED40-48S24 36 ~ 75 24 1666 10 92 1300 FED40-48D12 36 ~ 75 ±12 ±1666 10 91 ± 2600 FED40-48D15 36 ~ 75 ±15 ±1333 10 91 ± 1600 FED40-48D24 36 ~ 75 ±24 ±833 10 90 ±650 PART NUMBER STRUCTURE FED40 - 48 S 05 - N HS Series Name Input Voltage (VDC) Output Quantity Output Voltage (VDC) Remote Control options Heat-sink Single 3P3: 05: 12: 15: 24: 3.3 12: 24: 48: 9~18 18~36 36~75 Dual 12: 15: 24: ±12 ±15 ±24 /filetall/filetall /filetall/filetall: Positive logic Negative logic /filetall/filetall /filetall/filetall: HS: HC: No Heat-sink Heat-sink Heat-sink with Clamp

2 www.PDUKE.com 2014/4/30 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 12Vin(nom) 24Vin(nom) 48Vin(nom) VDC Start-up voltage 12Vin(nom) 24Vin(nom) 48Vin(nom) VDC Shutdown voltage 12Vin(nom) 24Vin(nom) 48Vin(nom) VDC Start up time Constant resistive load Power up Remote ON/OFF 60 60 ms Input surge voltage 1 second, max. 12Vin(nom) 24Vin(nom) 48Vin(nom) 100 VDC Input filter Pi type Positive logic (Standard) DC-DC ON DC-DC OFF Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Referred to –Vin pin Negative logic (Option) DC-DC ON DC-DC OFF Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC Remote ON/OFF Input current of Ctrl pin -0.5 0.5 mA Remote off input current 3 mA OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -1.0 +1.0 % Line regulation Low Line to High Line at Full Load -0.2 +0.2 % Load regulation No Load to Full Load Single Dual -0.5 -1.0 +0.5 +1.0 % Cross regulation Asymmetrical load 25%/100% FL Dual -5.0 +5.0 % Voltage adjustability Single output 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout -10 -10 +10 +20 % Ripple and noise Measured by 20MHz bandwidth With a 0.1 µF/50V X7R MLCC 3.3Vout, 5Vout 12Vout, 15Vout 24Vout 100 150 100 125 200 mVp-p Temperature coefficient -0.02 +0.02 %/℃ Transient response recovery time 25% load step change 250 µs Over voltage protection Zener diode clamp 3.3Vout 5Vout 12Vout 15Vout 24Vout 3.9 6.2 VDC Over load protection % of Iout rated; Hiccup mode 150 % Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Input to Output Input (Output) to Case 1600 1600 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance 1500 pF Switching frequency 225 250 275 kHz Safety meets UL60950-1 EN60950-1 IEC60950-1 Case material Copper Base material FR4 PCB Potting material Silicone (UL94 V-0) Weight 32g (1.13oz) MTBF MIL-HDBK-217F, Full load. 1.066 x 10 6 hrs

3 www.PDUKE.com 2014/4/30 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature -40 +85 ℃ Maximum case temperature +105 ℃ Over temperature protection +115 ℃ Storage temperature range -55 +125 ℃ Thermal impedance Vertical direction by natural con vection (20LFM) Without Heat-sink With Heat-sink 10.8 10.3 /W℃ Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions Level EMI (2) EN55022 Class A ESD EN61000-4-2 Air ± 8kV and Contact ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 20 V/m Perf. Criteria A Fast transient (3) EN61000-4-4 ± 2kV Perf. Criteria A Surge (3) EN61000-4-5 ± 2kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Note: 1. Test by minimum input and constant resistive load. 2. The standard modules meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. The external input components are required required if the module has to meet EN61000-4-4, EN61000-4-5. The FED40-12 /filetall/filetall/filetall recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ58A, 58V, 3000Watt peak pulse power) to connect in parallel. The FED40-24 /filetall/filetall/filetall recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ64A, 64V, 3000Watt peak pulse power) to connect in parallel. The FED40-48 /filetall/filetall/filetall recommended an aluminum electrolytic capacitor (N ippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ120A,120V, 3000Watt peak pulse power) to connect in parallel. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FED40-48S05 Derating Curve FED40-48S05 Derating Curve with Heat-sink FED40-48S05 Efficiency VS Input Voltage FED40-48S05 Efficiency VS Output Load MECHANICAL DRAWING

4 www.PDUKE.com 2014/4/30 1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) PIN CONNECTION PIN SINGLE DUAL 1 + Vin + Vin 2 - Vin - Vin

3 Ctrl Ctrl

6 Trim - Vout

Output can be externally trimmed by using the metho d shown below.