FED40-110D12W

FED40W_14 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1 www.PDUKE.com 2014/10/14 FED40W SERIES DC-DC CONVERTER 4:1 WIDE INPUT RANGE UP TO 40Watts FEATURES APPLICATIONS

• NO MINIMUM LOAD REQUIRED
• 1600VDC INPUT TO OUTPUT ISOLATION
• STANDARD 2.00 X 1.00 X 0.40 INCH
• SIX-SIDED CONTINUOUS SHIELD
• SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1, & EN50155
• CE MARKED
• COMPLIANT TO RoHS II & REACH
• RAILWA Y SYSTEM
• WIRELESS NETWORK
• TELECOM/DATACOM
• INDUSTRY CONTROL SYSTEM
• DISTRIBUTED POWER ARCHITECTURES
• SEMICONDUCTOR EQUIPMENT 1600VDC ISOLATION REMOTE CONTROL UVP OCP SCP OVP OTP LOW STANDBY POWER TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 otherwise noted℃ Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) Model Number VDC VDC mA mA % µF FED40-24S3P3W 9 ~ 36 3.3 10000 15 90 26600 FED40-24S05W 9 ~ 36 5 8000 15 91 20000 FED40-24S12W 9 ~ 36 12 3333 15 92 3900 FED40-24S15W 9 ~ 36 15 2666 15 92 2600 FED40-24S24W 9 ~ 36 24 1666 15 91 1300 FED40-24D12W 9 ~ 36 ±12 ±1666 15 90 ± 2600 FED40-24D15W 9 ~ 36 ±15 ±1333 15 90 ± 1600 FED40-24D24W 9 ~ 36 ±24 ±833 15 91 ±650 FED40-48S3P3W 18 ~ 75 3.3 10000 10 90 26600 FED40-48S05W 18 ~ 75 5 8000 10 91 20000 FED40-48S12W 18 ~ 75 12 3333 10 92 3900 FED40-48S15W 18 ~ 75 15 2666 10 92 2600 FED40-48S24W 18 ~ 75 24 1666 10 91 1300 FED40-48D12W 18 ~ 75 ±12 ±1666 10 90 ± 2600 FED40-48D15W 18 ~ 75 ±15 ±1333 10 90 ± 1600 FED40-48D24W 18 ~ 75 ±24 ±833 10 91 ±650 FED40-110S3P3W 43 ~ 160 3.3 10000 10 88 26600 FED40-110S05W 43 ~ 160 5 8000 10 89 20000 FED40-110S12W 43 ~ 160 12 3333 10 90.5 3900 FED40-110S15W 43 ~ 160 15 2666 10 91 2600 FED40-110S24W 43 ~ 160 24 1666 10 90 1300 FED40-110D12W 43 ~ 160 ±12 ±1666 10 89 ± 2600 FED40-110D15W 43 ~ 160 ±15 ±1333 10 89 ± 1600 FED40-110D24W 43 ~ 160 ±24 ±833 10 91 ±650 PART NUMBER STRUCTURE FED40 - 48 S 05 W - N HS Series Name Input Voltage (VDC) Output Quantity Output Voltage (VDC) Input Range Remote Control Option Heat-sink S: Single 3P3: 05: 12: 15: 24: 3.3 24: 48: 110: 9~36 18~75 43~160 Dual 12: 15: 24: ±12 ±15 ±24 4:1 /filetall/filetall /filetall/filetall: Positive logic Negative logic /filetall/filetall /filetall/filetall: HS HC No Heat-sink Heat-sink Heat-sink with Clamp

2 www.PDUKE.com 2014/10/14 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 24Vin(nom) 48Vin(nom) 110Vin(nom) 110 160 VDC Start-up voltage 24Vin(nom) 48Vin(nom) 110Vin(nom) VDC Shutdown voltage 24Vin(nom) 48Vin(nom) 110Vin(nom) VDC Start up time Constant resistive load Power up Remote ON/OFF 60 60 ms Input surge voltage 1 second, max. 24Vin(nom) 48Vin(nom) 110Vin(nom) 100 170 VDC Input filter Pi type Positive logic (Standard) DC-DC ON DC-DC OFF Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Referred to –Vin pin Negative logic (Option) DC-DC ON DC-DC OFF Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC Remote ON/OFF Input current of Ctrl pin -0.5 0.5 mA Remote off input current 3 mA OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -1.0 +1.0 % Line regulation Low Line to High Line at Full Load -0.2 +0.2 % Load regulation No Load to Full Load Single Dual -0.5 -1.0 +0.5 +1.0 % Cross regulation Asymmetrical load 25%/100% FL Dual -5.0 +5.0 % Voltage adjustability Single output 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout -10 -10 +10 +20 % Ripple and noise Measured by 20MHz bandwidth With a 0.1 µF/50V X7R MLCC 3.3Vout, 5Vout 12Vout, 15Vout 24Vout 100 150 100 125 200 mVp-p Temperature coefficient -0.02 +0.02 %/ ℃ Transient response recovery time 25% load step change 250 µs Over voltage protection Zener diode clamp 3.3Vout 5Vout 12Vout 15Vout 24Vout 3.9 6.2 VDC Over load protection % of Iout rated; Hiccup mode 150 % Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Input to Output Input (Output) to Case 1600 1600 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance 1500 pF Switching frequency 225 250 275 kHz Safety meets UL60950-1 EN60950-1 IEC60950-1 EN50155 Case material Copper Base material FR4 PCB Potting material Silicone (UL94 V-0) Weight 32g (1.13oz) MTBF MIL-HDBK-217F, Full load. 9.073 x 10 5 hrs

3 www.PDUKE.com 2014/10/14 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature -40 +85 ഒ Maximum case temperature +105 ഒ Over temperature protection +115 ഒ Storage temperature range -55 +125 ഒ Thermal impedance (1) Vertical direction by natural convection (20LFM) Without Heat-sink With Heat-sink 10.8 10.3 ഒ/W Thermal shock MIL-STD-810F Shock EN61373, MIL-STD-810F Vibration EN61373, MIL-STD-810F Relative humidity 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions Level EMI (2) EN55011,EN55022 Class A ESD EN61000-4-2 Air ± 8kV and Contact ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 20 V/m Perf. Criteria A Fast transient (3) EN61000-4-4 ± 2kV Perf. Criteria A Surge (3) EN61000-4-5 ± 2kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Note: 1. Test by minimum input and constant resistive load. 2. The standard modules meets EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. The external input components are required if the module has to meet EN61000-4-4, EN61000-4-5. The FED40-24 /filetall/filetall/filetallW recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ58A, 58V, 3000Watt peak pulse power) to connect in parallel. The FED40-48 /filetall/filetall/filetallW recommended an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220 µF/100V) and a TVS (SMDJ120A,120V, 3000Watt peak pulse power) to connect in parallel. The FED40-110 /filetall/filetall/filetallW recommended an aluminum electrolytic capacitor (Ruby-con BXF series, 68 µF/200V 3pcs in parallel) and a TVS (SMDJ90A, 90V, 3000Watt peak pulse power 2pcs in series connection ) to connect in parallel CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FED40-48S05W Derating Curve FED40-48S05W Derating C urve with Heat-sink FED40-48S05W Efficiency VS Input Voltage FED40-48S0 5W Efficiency VS Output Load

4 www.PDUKE.com 2014/10/14 MECHANICAL DRAWING EXTERNAL OUTPUT TRIMMING 1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) PIN CONNECTION PIN SINGLE DUAL 1 + Vin + Vin 2 - Vin - Vin

3 Ctrl Ctrl

6 Trim - Vout

Output can be externally trimmed by using the method shown below. TRIM UP R U TRIM DOWN R D